ARC16-70SBR-P013

REVISIONS REV ECO A1 DESCRIPTION RELEASE NEW DRAWING DATE BY APPR 12/JUL/22 LOUIE TOMMY CAVITY #1 42.0±0.6 104.1±0.5 5 TITLE: 2X KEYWAY KEY A SHOWN REDUCE SEAL,YELLOW 6 36.1 1.7 CAVITY #70 M4 HEX 8 M5 X 0.8-6g RETAINING BOLT INTERFACE SEAL DWG NO: ARC16-70SXR-P013 3.8 1.4 NOTES: UNLESS OTHERWISE SPECIFIED ARC16-70SA-P013 SHOWN ONLY SH: 4. MATING PART: ARC12-70PX* RECEPTACLE ( X = A,B,C,D KEYS ; * = ALL MODIFICATIONS) 5. SEE SHEET 2 FOR OTHER KEY ARRANGEMENTS OF: 2. MODIFICATIONS: REDUCE DIA. WIRE SEAL; INTERFACE SEALS ARE BONDED TO PLUG HOUSING 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.5 MOISTURE RESISTANCE: IP68 ( IM OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION ) IP69K( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT 5 REV: 1. MATERIAL: HOUSING: THERMOPLASTIC, BLACK SEAL: SILICONE RUBBER CLIP: STAINLESS STEEL BOLT: STAINLESS STEEL SEE SHEET 2 PART NUMBER DESCRIPTION QUANTITY 6.CONTACT SIZE AND REAR SEAL WIRE RANGE: DRAWN: TYPICAL CONTACT MIN. INSUL MAX. INSUL SIZE O.D. O.D. WIRE RANGE 16 1.35 mm (.053 in) 3.05 mm (.120 in) CHECKED: 14 - 20 AWG (2.0 - 0.5 mm 2) X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: 8. MATING TORQUE REQUIREMENT: 25 - 28 IN-LB [ 2.82 - 3.16 Nm ] 70 POS, PLUG, SOCKET,ARC SERIES, KEYED, RD SEAL,BLACK CUSTOMER: 7. PLUG IS SUPPLIED WITH DUST CAP PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B 9. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY NEXT ASS'Y: NONE SHEET 1 OF 2 REVISIONS REV ECO A1 DESCRIPTION RELEASE NEW DRAWING DATE BY APPR 12/JUL/22 LOUIE TOMMY TITLE: KEY A (2) PLACE KEY B (2) PLACE KEY D (2) PLACE KEY C (2) PLACE DWG NO: ARC16-24SX-P013 VARIANTS REF PART NUMBER REF PART NUMBER REF ARC16-24SX-P013 VARIANTS PART NUMBER REF ARC16-70SAR-P013 DRC16-70SAE-P013 ARC16-70SBR-P013 DRC16-70-SBE-P013 ARC16-70SCR-P013 DRC16-70SCE-P013 ARC16-70SDR-P013 DRC16-70SDE-P013 REV: ARC16-24SX-P013 VARIANTS PART NUMBER ARC16-70SXR-P013 ARC16-24SX-P013 VARIANTS SH: OF: ARC16-70SXR-P013 PART NUMBER DESCRIPTION QUANTITY DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: 70 POS, PLUG, SOCKET,ARC SERIES, KEYED, RD SEAL,BLACK CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE SHEET 2 OF 2