AT04-08PA-SS01

REVISIONS REV ECO A3 - DESCRIPTION RELEASE NEW DRAWING FORMAT DATE BY APPR 03/JAN/14 ORION - 36.4 TITLE: RECEPTACLE,8 PIN,AT,KEYED,SOLID REAR SEAL,END CAP SOLID REAR SEAL 23.7 1 KEYWAY (2) PLACES END CAP DWG NO: REFER TO SHEET 2 FOR AVAILABLE CONNECTOR HOUSING COLORS AT04-08PX-SSXXX NOTES: UNLESS OTHERWISE SPECIFIED 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. SH: 47.5 1 UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 X SIGNATURES DRAWN: ORION.LI Amphenol DATE 03/JAN/14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: 5. MATING PART: AT06-08SX* PLUG ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. ITEM PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. RECEPTACLE, 8 PIN, AT SERIES, KEYED, SOLID REAR SEAL, END CAP TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT04-08PX-SSXXX SHEET 1 A3 OF 2 2 SEE SHEET 2 DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY 3) Note reference = OF: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT A3 3. MODIFICATIONS: SOLID REAR SEAL; END CAP REV: 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER REVISIONS REV P/N AT04-08PB-SS01 KEY-B CONFIGURATION STANDARD COLOR: BLACK DESCRIPTION DATE BY APPR P/N AT04-08PD-SS01 KEY-D CONFIGURATION STANDARD COLOR: BROWN P/N AT04-08PC-SS01 KEY-C CONFIGURATION STANDARD COLOR: GREEN TITLE: P/N AT04-08PA-SS01 KEY-A CONFIGURATION STANDARD COLOR: GREY ECO KEYWAY (2) PLACES RECEPTACLE,8 PIN,AT,KEYED,SOLID REAR SEAL,END CAP KEYWAY (2) PLACES KEYWAY (2) PLACES COLOR GREY * BLACK PART NUMBER AT04-08PA-SS01 AT04-08PA-SSBLK KEY-B CONFIGURATION COLOR GREY BROWN AT04-08PA-SSBRN BROWN PART NUMBER PART NUMBER COLOR AT04-08PB-SSGRY GREY AT04-08PC-SSGRY GREY AT04-08PD-SSGRY AT04-08PB-SS01 BLACK AT04-08PC-SSBLK BLACK AT04-08PD-SSBLK AT04-08PC-SS01 GREEN AT04-08PD-SSGRN AT04-08PB-SSGRN AT04-08PB-SSBRN GREEN * BROWN AT04-08PC-SSBRN A3 AT04-08PA-SSGRN COLOR KEY-D CONFIGURATION REV: GREEN * BLACK GREEN PART NUMBER KEY-C CONFIGURATION AT04-08PX-SSXXX KEY-A CONFIGURATION DWG NO: KEYWAY (2) PLACES AT04-08PD-SS01 SH: * BROWN 2 OF: NOTE: OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: ORION.LI ITEM Amphenol DATE 03/JAN/14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. RECEPTACLE, 8 PIN, AT SERIES, KEYED, SOLID REAR SEAL, END CAP TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT04-08PX-SSXXX SHEET 2 A3 OF 2 2 AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE.