REVISIONS
REV
ECO
A3
-
DESCRIPTION
RELEASE NEW DRAWING FORMAT
DATE
BY
APPR
10/23/13
DRP
-
39
2X ø4
TITLE:
25.2
AT,8 PIN RECEPT. W/ FLANGE,GASKET & REDUCED DIA. SEAL
KEYWAY
(2) PLACES
REQUIRES CONTACT
RETENTION WEDGE AW8P
34
2.8
GASKET
17
47.5
DWG NO:
END CAP
AT04-08PB-PMR7G
6
REDUCED DIAMETER
WIRE SEAL
NOTES: UNLESS OTHERWISE SPECIFIED
REV:
1. MATERIAL:
HOUSING: THERMOPLASTIC; COLOR: BLACK
SEAL: SILICONE RUBBER
A3
SH:
2. MODIFICATIONS: REDUCED DIAMETER WIRE SEAL;
END CAP
1
5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY.
QUANTITY
6 CONTACT SIZE AND REAR SEAL WIRE RANGE:
CONTACT
SIZE
MIN. INSUL
O.D.
MAX. INSUL
O.D.
TYPICAL
WIRE RANGE
16
1.35 mm
(.053 in)
3.05 mm
(.120 in)
14 - 20 AWG
UNLESS OTHERWISE SPECIFIED
1) All dimensions are in metric(mm).
2) Tolerances are as follows:
1 PL DEC ±0.30
Fractions ±1/64
2 PL DEC ±0.15
Angles ±1°
3 PL DEC ±0.08
3) Note reference =
X
SIGNATURES
DRAWN:
D.PARKS
ITEM
Amphenol
DATE
10/23/13
CHECKED:
Sine Systems - www.amphenol-sine.com
44724 Morley Drive
Clinton Township, MI 48036
ENGINEER:
APPROVAL:
MATERIAL SPECIFICATIONS:
CUSTOMER:
PROCESS SPECIFICATIONS:
AT SERIES, 8 PIN RECEPTACLE W/FLANGE,
GASKET & REDUCED DIAMETER SEAL
THIS DRAWING IS SUPPLIED FOR
INFORMATION ONLY. DESIGN FEATURES,
SPECIFICATIONS AND PERFORMANCE DATA SIZE
SHOWN HEREON ARE THE PROPERTY OF
THE AMPHENOL CORPORATION. NO RIGHTS
OF REPRODUCTION ARE IMPLIED. ALL
DIMENSIONS ARE SUBJECT TO NORMAL
SCALE:
MANUFACTURING VARIATIONS.
TYPE
B C-
NEXT ASS'Y:
NONE
DWG NO:
REVISION
AT04-08PB-PMR7G A3
SHEET
1
OF
1
1
4. MATING PART: AT06-08SB* PLUG
( * = MODIFICATIONS )
AT04-08PB-PMR7G
DESCRIPTION
PART NUMBER
MATERIALS LIST
48
66
OF:
3. SPECIFICATIONS:
3.1 CURRENT RATING: 13 AMPS
3.2 OPERATING TEMPERATURE: -55°C TO +125°C
3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2
MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC.
3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C.
3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION )
3.6 MATING CYCLE DURABILITY: 100 CYCLES
3.7 RoHS COMPLIANT
AT Series™ - Contact Size 16 Options
Stamped & Formed Contacts, Sockets & Pins
Machined Contacts, Sockets & Pins
Size
AWG
Type
Part Number
Description
Size
AWG
Type
AT60-215-1631
Male Contact - Pin, Gold-plated
16
14
Machined
AT60-14-0144
Male Contact - Pin, Gold-plated
16
14-16
Stamped & Formed
AT62-209-1631
Female Contact - Socket, Gold-plated
16
14
Machined
AT62-14-0144
Female Contact - Socket, Gold-plated
16
14-16
Stamped & Formed
AT60-215-16141
Male Contact - Pin, Nickel-plated
16
14
Machined
AT60-14-0122
Male Contact - Pin, Nickel-plated
16
14-16
Stamped & Formed
AT62-209-16141
Female Contact - Socket, Nickel-plated
16
14
Machined
AT62-14-0122
Female Contact - Socket, Nickel-plated
16
14-16
Stamped & Formed
AT60-202-1631
Male Contact - Pin, Gold-plated
16
16-20
Machined
AT60-16-0144
Male Contact - Pin, Gold-plated
16
16-18
Stamped & Formed
Part Number
Description
AT62-201-1631
Female Contact - Socket, Gold-plated
16
16-20
Machined
AT62-16-0144
Female Contact - Socket, Gold-plated
16
16-18
Stamped & Formed
AT60-202-16141
Male Contact - Pin, Nickel-plated
16
16-20
Machined
AT60-16-0122
Male Contact - Pin, Nickel-plated
16
16-18
Stamped & Formed
AT62-201-16141
Female Contact - Socket, Nickel-plated
16
16-20
Machined
AT62-16-0122
Female Contact - Socket, Nickel-plated
16
16-18
Stamped & Formed
Male Contact - Pin, Gold-plated
16
18-20
Stamped & Formed
AT60-202-1631-22
Male Contact - Pin, Gold-plated
16
22-24
Machined
AT60-16-0644
AT62-201-1631-22
Female Contact - Socket, Gold-plated
16
22-24
Machined
AT62-16-0644
Female Contact - Socket, Gold-plated
16
18-20
Stamped & Formed
AT60-202-16141-22
Male Contact - Pin, Nickel-plated
16
22-24
Machined
AT60-16-0622
Male Contact - Pin, Nickel-plated
16
18-20
Stamped & Formed
Machined
AT62-16-0622
Female Contact - Socket, Nickel-plated
16
18-20
Stamped & Formed
AT60-16-0844
Male Contact - Pin, Gold-plated
16
20-22
Stamped & Formed
AT62-16-0844
Female Contact - Socket, Gold-plated
16
20-22
Stamped & Formed
AT60-16-0822
Male Contact - Pin, Nickel-plated
16
20-22
Stamped & Formed
AT62-16-0822
Female Contact - Socket, Nickel-plated
16
20-22
Stamped & Formed
AT62-201-16141-22
Female Contact - Socket, Nickel-plated
16
22-24
Tooling - Machined Contacts
Part
Part Number
CA-5D12
Description
Universal Hand Crimp Tool, Size 12/16/20
(Machined contacts only)
Tooling - Stamped & Formed Contacts
Part
CA-5E12
Pneumatic Crimp Tool, Size 12/16/20
(Machined contacts only)
Contact Removal Tools
Part
Part Number
ATRT-100
AT11-310-1605
A114017
Description
Used for removal of contacts for A Series™ products
Part Number
Description
MFX-3950
Crimp Die - Size 16, 18-20AWG (S&F contacts only)
MFX-3953
Crimp Die - Size 16, 16-18AWG (S&F contacts only)
MFX-3975
Crimp Die - Size 16, 14-16AWG (S&F contacts only)
MFX-3990
Crimp Die - Size 16, 20-22AWG (S&F contacts only)
ATT-16-00
Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only)
ATT-16-01
Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only)
ATT-1612-03
Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only)
Contact Removal Tool, Plastic, Size 16
Sealing Plug, Size 16, White
Amphenol Sine Systems
44724 Morley Drive
Clinton Township, MI 48036 USA
www.amphenol-sine.com
09/2021
