AT04-08PC-SRGN

REVISIONS REV ECO A3 - DESCRIPTION RELEASE NEW DRAWING FORMAT DATE BY APPR 11DEC13 DRP - 36.5 TITLE: RECEPTACLE,8 PIN,AT SERIES,KEYED,STRAIN RELIEF END CAP REQUIRES CONTACT RETENTION WEDGE AW8P 7 23.7 STRAIN RELIEF END CAP BLACK - ALL CONNECTORS 1 KEYWAY (2) PLACES DWG NO: AT04-08PX-SRXXX NOTES: UNLESS OTHERWISE SPECIFIED 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. REV: 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER A3 1 1 3. MODIFICATIONS: STRAIN RELIEF END CAP SH: REFER TO SHEET 2 FOR AVAILABLE CONNECTOR HOUSING COLORS 58 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 X 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: SIGNATURES DRAWN: D.PARKS ITEM Amphenol DATE 11DEC13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. 16 2.24 mm (.088 in) 3.68 mm (.145 in) CUSTOMER: TYPICAL WIRE RANGE PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. RECEPTACLE, 8 PIN, AT SERIES, KEYED, STRAIN RELIEF END CAP TYPE B C- 14 - 20 AWG NEXT ASS'Y: NONE DWG NO: REVISION AT04-08PX-SRXXX SHEET 1 A3 OF 2 2 5. MATING PART: AT06-08SX* PLUG ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) SEE SHEET 2 DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY 3) Note reference = OF: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT REVISIONS REV P/N AT04-08PB-SRBK KEY-B CONFIGURATION STANDARD COLOR: BLACK DESCRIPTION DATE BY APPR P/N AT04-08PD-SRBR KEY-D CONFIGURATION STANDARD COLOR: BROWN P/N AT04-08PC-SRGN KEY-C CONFIGURATION STANDARD COLOR: GREEN TITLE: P/N AT04-08PA-SRGRY KEY-A CONFIGURATION STANDARD COLOR: GREY ECO RECEPTACLE,8 PIN,AT SERIES,KEYED,STRAIN RELIEF END CAP KEYWAY (2) PLACES KEYWAY (2) PLACES KEYWAY (2) PLACES COLOR GREY * BLACK PART NUMBER AT04-08PA-SRGRY AT04-08PA-SRBK KEY-B CONFIGURATION COLOR PART NUMBER KEY-C CONFIGURATION COLOR KEY-D CONFIGURATION PART NUMBER PART NUMBER COLOR GREY AT04-08PC-SRGRY GREY AT04-08PD-SRGRY AT04-08PB-SRBK BLACK AT04-08PC-SRBK BLACK AT04-08PD-SRBK AT04-08PB-SRGN AT04-08PC-SRGN GREEN AT04-08PD-SRGN AT04-08PB-SRBR GREEN * BROWN GREEN AT04-08PA-SRGN BROWN AT04-08PA-SRBR BROWN AT04-08PC-SRBR A3 AT04-08PB-SRGRY REV: GREY * BLACK GREEN AT04-08PX-SRXXX KEY-A CONFIGURATION DWG NO: KEYWAY (2) PLACES AT04-08PD-SRBR SH: * BROWN 2 OF: NOTE: QUANTITY OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. 3) Note reference = DESCRIPTION PART NUMBER MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 X SIGNATURES DRAWN: D.PARKS ITEM Amphenol DATE 11DEC13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. RECEPTACLE, 8 PIN, AT SERIES, KEYED, STRAIN RELIEF END CAP TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT04-08PX-SRXXX SHEET 2 A3 OF 2 2 AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. STRAIN RELIEF END CAPS ARE AVAILABLE IN BLACK ONLY. AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed Part Number Description AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 A114017 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plug, Size 16, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021