AT04-12PA-EC01

REVISIONS REV 7 ECO A3 A4 C1403S DESCRIPTION DATE BY RELEASE NEW DRAWING FORMAT 03JAN14 JARRY UPDATE THE APPEARANCE 11NOV21 LOUIE APPR TOMMY TITLE: 52.4±0.5 END CAP DWG NO: 22.2±0.5 40.5±0.5 1 REFER TO SHEET 2 FOR AVAILABLE CONNECTOR COLORS NOTES: UNLESS OTHERWISE SPECIFIED KEYWAY (3) PLACES 1 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. REV: 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER SH: 3. MODIFICATIONS: END CAP ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 16 2.24 mm (.088 in) 3.68 mm (.145 in) SEE SHEET 2 PART NUMBER OF: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C REQUIRES CONTACT 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 RETENTION WEDGE AW12P MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP69K&IP68 ( 1M OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: 4.7 RoHS COMPLIANT CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE 5. MATING PART: AT06-12SX* PLUG REF: DT04-12PA-BE02 、 DT04-12PB-BE02 、DT04-12PC-BE02 、 DT04-12PD-BE02 、 DT04-12PA-BE03 DESCRIPTION QUANTITY DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: RECEPTACLE, 12 PIN, AT SERIES, KEYED, END CAP CUSTOMER: WEIGHT:20.9g PROCESS SPECIFICATIONS: 14 - 20 AWG THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE A4 SHEET 1 OF 2 REVISIONS REV ECO A3 A4 P/N AT04-12PA-EC01 KEY-A CONFIGURATION STANDARD COLOR: GREY P/N AT04-12PB-EC01 KEY-B CONFIGURATION STANDARD COLOR: BLACK C1403S DESCRIPTION DATE BY RELEASE NEW DRAWING FORMAT 03JAN14 JARRY UPDATE THE APPEARANCE 11NOV21 LOUIE P/N AT04-12PC-EC01 KEY-C CONFIGURATION STANDARD COLOR: GREEN APPR TOMMY P/N AT04-12PD-EC01 KEY-D CONFIGURATION STANDARD COLOR: BROWN TITLE: C-KEYED (3) PLACES D-KEYED (3) PLACES B-KEYED (3) PLACES A-KEYED (3) PLACES DWG NO: KEY-A CONFIGURATION AT04-12PA-ECBLK COLOR GREY GREEN AT04-12PA-ECGRN * BLACK GREEN BROWN AT04-12PA-ECBRN BROWN PART NUMBER COLOR AT04-12PB-ECGRY GREY AT04-12PB-EC01 AT04-12PB-ECGRN AT04-12PB-ECBRN KEY-D CONFIGURATION PART NUMBER COLOR PART NUMBER AT04-12PC-ECGRY GREY AT04-12PD-ECGRY BLACK AT04-12PC-ECBLK BLACK AT04-12PD-ECBLK GREEN AT04-12PC-EC01 GREEN AT04-12PD-ECGRN AT04-12PC-ECBRN BROWN AT04-12PD-EC01 * BROWN OF: * SH: * BLACK PART NUMBER AT04-12PA-EC01 KEY-C CONFIGURATION REV: COLOR GREY KEY-B CONFIGURATION PART NUMBER DESCRIPTION QUANTITY NOTE: DRAWN: AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. MATERIAL SPECIFICATIONS: RECEPTACLE, 12 PIN, AT SERIES, KEYED, END CAP CUSTOMER: WEIGHT:20.9g PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE A4 SHEET 2 OF 2