AT04-12PA-NES

REVISIONS REV ECO A1 - DESCRIPTION CUSTOMER DRAWING RELEASE DATE BY APPR 31MAY2016 JAH - 40.5 TITLE: RECEPTACLE, 12 PIN, AT SERIES, A-KEYED, SHORT 6 REQUIRES CONTACT RETENTION WEDGE AW12P 22.2 DWG NO: AT04-12PA-NES NOTES: UNLESS OTHERWISE SPECIFIED 1 MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER REV: A1 2. MODIFICATIONS: N/A SH: 3. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT OF: DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: SIGNATURES DRAWN: JAH ITEM Amphenol DATE 31MAY16 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CONTACT SIZE 16 MIN. INSUL O.D. 2.24 mm (.088 in) MAX. INSUL O.D. 3.68 mm (.145 in) TYPICAL WIRE RANGE CUSTOMER: PROCESS SPECIFICATIONS: 14 - 20 AWG THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. RECEPTACLE, 12 PIN, AT SERIES, A-KEYED, SHORT TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT04-12PA-NES SHEET 1 A1 OF 1 1 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 1 4. MATING PART: AT06-12SA* PLUG ( * = MODIFICATIONS AND COLORS ) 45.8 AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed Part Number Description AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 A114017 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plug, Size 16, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021