AT04-12PB-PM15

REVISIONS 2X Ø5.60 4X R5.0 16.7 29.1 45.50 61.0 REV ECO DESCRIPTION A1 - DATE BY 14JUL15 JAH A2 - A3 - UPDATE 27OCT15 JARRY ADDED -15 & -16 OPTIONS ADDED COLORS TO NOTE #1 23MAR18 JAH A4 - CORRECTED DIMS 01OCT18 JAH RELEASE APPR TOMMY 25.50 TITLE: MOUNTING PLATE SIZE 34.0 RECEPTACLE, 12 PIN, AT SERIES, W/FLANGE REQUIRES CONTACT RETENTION WEDGE AW12P 61.0 GASKET 75.7 DWG NO: 2X Ø4.0, 16.4 DP FROM MATING SURFACE RECOMMENDED ATTACHMENT OPTIONS: 1. HEX WASHER HEAD SHEETMETAL SCREW, #10, 1/2" LONG, HEX SIZE 5/16". 2. SELF THREAD SCREW FOR PLASTIC SUCH AS ST 4.8 6 STANDARD OR REDUCED DIAMETER SEAL AT04-12PX-PMXX NOTES: UNLESS OTHERWISE SPECIFIED REV: 1. MATERIAL: HOUSING: THERMOPLASTIC; COLOR: PER KEY OPTION END CAP: THERMOPLASTIC; COLOR: BLACK STRAIN RELIEF CAP: THERMOPLASTIC; COLOR: BLACK SEALS: SILICONE RUBBER; COLOR: RED A4 QUANTITY REDUCED DIAMETER SEAL: SEE SHEET 2 FOR KEYS DESCRIPTION PART NUMBER MATERIALS LIST UNLESS OTHERWISE SPECIFIED CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. TYPICAL WIRE RANGE 16 1.35 mm (.053 in) 3.05 mm (.120 in) 14 - 20 AWG 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: J. HEAD Amphenol DATE 14JUL15 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: STANDARD SEAL: CUSTOMER: CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. TYPICAL WIRE RANGE 16 2.24 mm (.088 in) 3.68 mm (.145 in) 14 - 20 AWG PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. RECEPTACLE, 12 PIN, AT SERIES, W/FLANGE TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT04-12PX-PMXX SHEET 1 A4 OF 2 2 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 6 CONTACT SIZE AND REAR SEAL WIRE RANGE SHOWN WITH STRAIN RELIEF OF: 4. MATING PART: AT06-12SX* PLUG ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) SHOWN WITH END CAP 1 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT SH: 2. MODIFICATIONS: FLANGE, GASKET, END CAP (OPT), STRAIN RELIEF CAP (OPT), REDUCED DIAMETER SEAL (OPT). REVISIONS P/N AT04-12PA-PMXX KEY-A CONFIGURATION STANDARD HOUSING COLOR: GREY P/N AT04-12PB-PMXX KEY-B CONFIGURATION STANDARD HOUSING COLOR: BLACK DESCRIPTION A1 - DATE BY 14JUL15 JAH A2 - A3 - UPDATE 27OCT15 JARRY ADDED -15 & -16 OPTIONS ADDED COLORS TO NOTE #1 23MAR18 JAH A4 - CORRECTED DIMS 01OCT18 JAH RELEASE APPR TOMMY P/N AT04-12PD-PMXX KEY-D CONFIGURATION STANDARD HOUSING COLOR: BROWN P/N AT04-12PC-PMXX KEY-C CONFIGURATION STANDARD HOUSING COLOR: GREEN KEYWAY (2) PLACES ECO TITLE: KEYWAY (2) PLACES KEYWAY (2) PLACES REV KEYWAY (2) PLACES RECEPTACLE, 12 PIN, AT SERIES, W/FLANGE DWG NO: AT04-12PX-PMXX END CAP SHOWN ON THIS SHEET KEY-C CONFIGURATION END SEAL CAP AT04-12PC-PM11 STANDARD NO AT04-12PC-PM12 REDUCED DIA. NO AT04-12PC-PM13 STANDARD YES AT04-12PC-PM14 REDUCED DIA. YES AT04-12PC-PM15 STANDARD NO AT04-12PC-PM16 REDUCED DIA. NO PART NUMBER KEY-D CONFIGURATION END SEAL CAP AT04-12PD-PM11 STANDARD NO AT04-12PD-PM12 REDUCED DIA. NO AT04-12PD-PM13 STANDARD YES AT04-12PD-PM14 REDUCED DIA. YES AT04-12PD-PM15 STANDARD NO AT04-12PD-PM16 REDUCED DIA. NO STRAIN RELIEF NO NO NO NO YES YES PART NUMBER STRAIN RELIEF NO NO NO NO YES YES 2 STRAIN RELIEF NO NO NO NO YES YES SH: KEY-B CONFIGURATION END SEAL CAP AT04-12PB-PM11 STANDARD NO AT04-12PB-PM12 REDUCED DIA. NO AT04-12PB-PM13 STANDARD YES AT04-12PB-PM14 REDUCED DIA. YES AT04-12PB-PM15 STANDARD NO AT04-12PB-PM16 REDUCED DIA. NO PART NUMBER A4 STRAIN RELIEF NO NO NO NO YES YES REV: KEY-A CONFIGURATION END SEAL CAP AT04-12PA-PM11 STANDARD NO AT04-12PA-PM12 REDUCED DIA. NO AT04-12PA-PM13 STANDARD YES AT04-12PA-PM14 REDUCED DIA. YES AT04-12PA-PM15 STANDARD NO AT04-12PA-PM16 REDUCED DIA. NO PART NUMBER OF: PART NUMBER DESCRIPTION MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: J. HEAD Amphenol DATE 14JUL15 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. RECEPTACLE, 12 PIN, AT SERIES, W/FLANGE TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT04-12PX-PMXX SHEET 2 A4 OF 2 2 LOGO AND P/N A-KEYED P/N:AT04-12PA-PM B-KEYED P/N:AT04-12PB-PM C-KEYED P/N:AT04-12PC-PM D-KEYED P/N:AT04-12PD-PM A Series™ - Contact Size 16 Options (Works with: AT, ATV, AHD-9, ARC, DuraMate and PanelMate Series) Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-18 Stamped & Formed Part Number Description Size AWG Type Part Number Description AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-18 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-18 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-18 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0144 AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 16-20 Stamped & Formed AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 16-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0644 Male Contact - Pin, Gold-plated 16 16-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 16-20 Stamped & Formed AT60-16-0677 Male Contact - Pin, Tin-plated 16 16-20 Stamped & Formed AT62-16-0677 Female Contact - Socket, Tin-plated 16 16-20 Stamped & Formed Description AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AUTK-16 Hand Crimp Tool, Size 16 AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AUTK-100 Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20 AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 Tooling - Machined Contacts Part Number Tooling - Stamped & Formed Contacts Contact Removal Tools (For both Machined or Stamped & Formed Contacts) Part Number ATRT-100 AT11-310-1605 Description MFX-3950 Crimp Die - Size 16, 18-20AWG MFX-3953 Crimp Die - Size 16, 16-18AWG MFX-3975 Crimp Die - Size 16, 14-16AWG MFX-3990 Crimp Die - Size 16, 20-22AWG ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG Contact and Wedgelock Extraction Tool Contact Removal Tool, Plastic, Size 16 Sealing Plugs (For both Machined or Stamped & Formed Contacts) Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10-2023