AT04-6P-MM01BLK

REVISIONS REV 48.2±0.6 ECO A3 A4 DESCRIPTION RELEASE NEW DWG FORMAT C0540S A5 DATE BY 03JAN14 JARRY APPR UPDATE DIMENSIONS 04JUL16 JONY TOMMY ADD COLOR OPTION 23NOV20 LOUIE TOMMY TITLE: 6 REDUCED DIAMETER WIRE SEAL REQUIRES CONTACT RETENTION WEDGE AW6P 24.3 STANDARD COLOR IS GREY, ADDITION COLOR SHOWN IN PART NUMBER CHART DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 2. MODIFICATIONS: END CAP; REDUCED DIA. WIRE SEAL PART NUMBER CHART PART NUMBER 4. MATING PART: AT06-6S* PLUG ( * = MODIFICATIONS AND COLORS ) BLACK AT04-6P-MM01BLK BLUE AT04-6P-MM01BLU 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. BROWN AT04-6P-MM01BRN GREEN AT04-6P-MM01GRN RED AT04-6P-MM01RED WHITE AT04-6P-MM01WHT YELLOW AT04-6P-MM01YEL ORANGE AT04-6P-MM01ORG 16 1.35 mm (.053 in) 3.05 mm (.120 in) 14 - 20 AWG (2.0-0.5mm²) SEE PART NUMBER CHART PART NUMBER OF: COLOR AT04-6P-MM01 CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE SH: STANDARD MOLDED COLOR IS GREY. ADDITIONAL COLORS SHOWN IN PART NUMBER CHART ARE AVAILABLE VIA SPECIAL ORDER. GREY 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: REV: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 21.1 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP68(1M OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION) IP69K(MATED CONDITION) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT REF: DT04-6P-CE01，DT04-6P-CE03 DESCRIPTION QUANTITY DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: RECEPTACLE, 6 PIN, AT SERIES , REDUCED DIAMETER WIRE SEAL, END CAP THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE A5 SHEET 1 OF 1 AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed Part Number Description AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 A114017 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plug, Size 16, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021