AT04GY-2P-N-TPE-M4

LENGTH TABLE PART NUMBER LENGTH (METERS) AT04GY-2P-N-TPE-M1 1 (3.28FT) AT04GY-2P-N-TPE-M2 2 (6.56FT) AT04GY-2P-N-TPE-M4 4 (13.12FT) AT04GY-2P-N-TPE-M5 5 (16.40FT) AT04GY-2P-N-TPE-M10 10 (32.80FT) AT04GY-2P-N-TPE-M2 CONNECTOR TYPE AT - Amphenol AT Connector *PLEASE CONTACT CSR FOR ADDITONAL AVAILABLE OPTIONS* CABLE LENGTH (M = METERS) 1 = 1M 2 = 2M 4 = 4M 5 = 5M 10 = 10M CUSTOM CABLE LENGTH OPTIONS AVAILABLE. CONTACT CSR. DESIGN 04 Male Connector 06 Female Connector POSITIONS 2 2 Pin 3 3 Pin 4 4 Pin 6 6 Pin 8 8 Pin 12 12 Pin CABLE TYPE TPE - TPE, BLACK DESIGN S Female Connector P Male Connector LED/SUPPRESSOR CIRCUIT N - NONE S - LED/SUPPRESSOR DIODE(2POSITION) COLORS GY - GRAY BK - BLACK BN - BROWN YL - YELLOW RD - RED GN - GREEN WT - WHITE BL - BLUE ORG - ORANGE BEFORE OVERMOLD NOTE: 8 & 12 WAY ARE ONLY AVAILABLE IN STANDARD KEY/COLOR CONFIGURATIONS. KEY A - GRAY KEY B - BLACK KEY C - GREEN KEY D - BROWN AFTER OVERMOLD NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL: HOUSING: PA66 SEAL: SILICONE RUBBER 2. MODIFICATIONS: OVERMOLDED 3. 4. SPECIFICATIONS: 3.1 CURRENT RATING: 15AMPS - 300V AC/DC 3.2 OVERMOLDED ASY OPERATING TEMPERATURE: -40C TO +100C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 5. MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGAOHMS MIN @ 25C 3.5 MOISTURE RESISTANCE: IP68 MATED CONDITION (1M OF WATER FOR 6. 24 HOURS). 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT CABLE SPECIFICATIONS: COMPONENTS: TWO 18AWG, SRPVC INSULATED CONDUCTORS 41/34 BARE COPPER. CONDUCTOR INSULATION: SRPVC (SEE COLOR CODE) PAIR TWIST: 2 CONDUCTORS CABLED TOGETHER WITH FRPP FILLERS BINDER: FLEECE TAPE JACKET: TPE, BLACK PRINT: AMPHENOL SINE SYSTEMS KA-56764-2 2C 18AWG (UL FILE NUMBER) RU AWM 21270 105C 600V --- (CSA FILE NUMBER) CSA AWM I/II A/B -40C TO +105C 600V FT4 APPROVALS: AWM 21270, CSA AWM I/II A/B FT4, SUNLIGHT RESISTANT, OIL R ESISTANT, MATERIALS ARE RoHS 3 COMPLIANT. DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: MATING PART: AT06-2S* PLUG (* = MODIFICATIONS AND COLORS) PROCESS SPECIFICATIONS: RO WS RO WS ITEM Amphenol DATE 11/5/2020 1/15/2021 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 1/15/2021 2 POS RECEP MOLDED, BLK TPE, SNGL ENDED CBL ASSY, AMPHENOL AT CONN AT04-2P THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: REVISION C C- AT04GY-2P-N-TPE-Mx A1 ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. NEXT ASS'Y: NONE AT04GY-2P-N-TPE-Mx SHEET 1 OF 1