AT06-08SB-RD01

REVISIONS REV ECO A3 - DESCRIPTION RELEASE NEW DWG FORMAT DATE BY 11DEC13 DRP APPR 36.8 TITLE: PLUG, 8 SOCKET, AT SERIES, KEYED, REDUCED DIA. WIRE SEAL 1 KEYED (2) PLACES REQUIRES CONTACT RETENTION WEDGE AW8S 7 REDUCED DIAMETER WIRE SEAL 19.7 DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED 1 REFER TO SHEET 2 FOR AVAILABLE CONNECTOR COLORS AT06-08SX-RDXXX 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 3. MODIFICATIONS: REDUCED DIAMETER WIRE SEAL REV: A3 SH: 1 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: X SIGNATURES DRAWN: MIN. INSUL O.D. MAX. INSUL O.D. 16 1.35 mm (.053 in) 3.05 mm (.120 in) TYPICAL WIRE RANGE Amphenol DATE 11DEC13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: CONTACT SIZE D.PARKS ITEM PROCESS SPECIFICATIONS: PLUG, 8 SOCKET, AT SERIES, KEYED, REDUCED DIAMETER WIRE SEAL THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- 14 - 20 AWG NEXT ASS'Y: NONE DWG NO: REVISION AT06-08SX-RDXXX SHEET 1 A3 OF 2 2 SEE SHEET 2 DESCRIPTION PART NUMBER MATERIALS LIST 31.2 QUANTITY 5. MATING PART: AT04-08PX* RECEPTACLE ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) OF: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT REVISIONS REV P/N AT06-08SA-RD01 KEY-A CONFIGURATION STANDARD COLOR: GREY P/N AT06-08SB-RD01 KEY-B CONFIGURATION STANDARD COLOR: BLACK ECO DESCRIPTION P/N AT06-08SC-RD01 KEY-C CONFIGURATION STANDARD COLOR: GREEN DATE BY APPR P/N AT06-08SD-RD01 KEY-D CONFIGURATION STANDARD COLOR: BROWN TITLE: PLUG, 8 SOCKET, AT SERIES, KEYED, REDUCED DIA. WIRE SEAL KEYED (2) PLACES KEYED (2) PLACES KEYED (2) PLACES COLOR AT06-08SA-RD01 COLOR GREY BROWN AT06-08SA-RDBRN BROWN PART NUMBER COLOR PART NUMBER AT06-08SB-RDGRY GREY AT06-08SC-RDGRY GREY AT06-08SD-RDGRY AT06-08SB-RD01 BLACK AT06-08SC-RDBLK BLACK AT06-08SD-RDBLK AT06-08SC-RD01 GREEN AT06-08SD-RDGRN AT06-08SB-RDGRN AT06-08SB-RDBRN GREEN * BROWN * BROWN AT06-08SC-RDBRN SH: AT06-08SA-RDGRN COLOR KEY-D CONFIGURATION A3 GREEN * BLACK GREEN AT06-08SA-RDBLK PART NUMBER KEY-C CONFIGURATION REV: GREY * BLACK PART NUMBER KEY-B CONFIGURATION AT06-08SX-RDXXX KEY-A CONFIGURATION DWG NO: KEYED (2) PLACES AT06-08SD-RD01 2 OF: QUANTITY AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 UNLESS OTHERWISE SPECIFIED 3) Note reference = OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. X SIGNATURES DRAWN: D.PARKS ITEM Amphenol DATE 11DEC13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: PLUG, 8 SOCKET, AT SERIES, KEYED, REDUCED DIAMETER WIRE SEAL THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT06-08SX-RDXXX SHEET 2 A3 OF 2 2 DESCRIPTION PART NUMBER MATERIALS LIST NOTE: AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plugs Part Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 03/2022