AT06-08SB

REVISIONS REV ECO A3 - DESCRIPTION RELEASE NEW DWG FORMAT DATE BY 27DEC13 JARRY APPR 36.8 TITLE: 7 PLUG, 8 SOCKET, AT SERIES, KEYED 1 KEYED (2) PLACES REQUIRES CONTACT RETENTION WEDGE AW8S STANDARD WIRE SEAL 19.7 DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. 1 AT06-08SX-XXX REFER TO SHEET 2 FOR AVAILABLE CONNECTOR COLORS 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 3. MODIFICATIONS: N/A REV: A3 SH: 1 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: X SIGNATURES DRAWN: JARRY Amphenol DATE 27DEC13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: PLUG, 8 SOCKET, AT SERIES, KEYED CUSTOMER: CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. TYPICAL WIRE RANGE 16 2.24 mm (.088 in) 3.68 mm (.145 in) 14 - 20 AWG ITEM PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT06-08SX-XXX SHEET 1 A3 OF 2 2 SEE SHEET 2 DESCRIPTION PART NUMBER MATERIALS LIST 31.2 QUANTITY 5. MATING PART: AT04-08PX* RECEPTACLE ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) OF: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT REVISIONS REV P/N AT06-08SA KEY-A CONFIGURATION STANDARD COLOR: GREY P/N AT06-08SB KEY-B CONFIGURATION STANDARD COLOR: BLACK ECO DESCRIPTION P/N AT06-08SC KEY-C CONFIGURATION STANDARD COLOR: GREEN DATE BY APPR P/N AT06-08SD KEY-D CONFIGURATION STANDARD COLOR: BROWN TITLE: KEYED (2) PLACES PLUG, 8 SOCKET, AT SERIES,KEDED KEYED (2) PLACES KEYED (2) PLACES COLOR AT06-08SA COLOR GREY BROWN AT06-08SA-BRN BROWN PART NUMBER COLOR PART NUMBER AT06-08SB-GRY GREY AT06-08SC-GRY GREY AT06-08SD-GRY AT06-08SB BLACK AT06-08SC-BLK BLACK AT06-08SD-BLK AT06-08SC GREEN AT06-08SD-GRN AT06-08SB-GRN AT06-08SB-BRN GREEN * BROWN * BROWN AT06-08SC-BRN SH: AT06-08SA-GRN COLOR KEY-D CONFIGURATION A3 GREEN * BLACK GREEN AT06-08SA-BLK PART NUMBER KEY-C CONFIGURATION REV: GREY * BLACK PART NUMBER KEY-B CONFIGURATION AT06-08SX-XXX KEY-A CONFIGURATION DWG NO: KEYED (2) PLACES AT06-08SD 2 OF: QUANTITY AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 UNLESS OTHERWISE SPECIFIED 3) Note reference = OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. X SIGNATURES DRAWN: JARRY ITEM Amphenol DATE 27DEC13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: PLUG, 8 SOCKET, AT SERIES, KEYED CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT06-08SX-XXX SHEET 2 A3 OF 2 2 DESCRIPTION PART NUMBER MATERIALS LIST NOTE: AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plugs Part Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 03/2022