AT06-08SD-MM01

REVISIONS REV ECO A3 - DESCRIPTION RELEASE NEW DWG FORMAT DATE BY 03JAN14 JARRY APPR 22 TITLE: 1 KEYED (2) PLACES PLUG,8 SOCKET,AT,END CAP,KEYED,REDUCED DIA. WIRE SEAL REQUIRES CONTACT RETENTION WEDGE AW8S 7 REDUCED DIAMETER WIRE SEAL 37.3 END CAP DWG NO: AT06-08SX-MMXXX 33 NOTES: UNLESS OTHERWISE SPECIFIED 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. REFER TO SHEET 2 FOR AVAILABLE CONNECTOR COLORS A3 1 REV: 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER SH: 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. SEE PART NUMBER CHART DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. 16 1.35 mm (.053 in) 3.05 mm (.120 in) X SIGNATURES DRAWN: JARRY ITEM Amphenol DATE 03JAN14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: TYPICAL WIRE RANGE PROCESS SPECIFICATIONS: PLUG, 8 SOCKET, AT SERIES, END CAP, KEYED, REDUCED DIAMETER WIRE SEAL THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- 14 - 20 AWG NEXT ASS'Y: NONE DWG NO: REVISION AT06-08SX-MMXXX A3 SHEET 1 OF 2 2 5. MATING PART: AT04-08PX* RECEPTACLE ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) OF: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT 1 3. MODIFICATIONS: END CAP; REDUCED DIAMETER WIRE SEAL REVISIONS REV P/N AT06-08SA-MM01 KEY-A CONFIGURATION STANDARD COLOR: GREY P/N AT06-08SB-MM01 KEY-B CONFIGURATION STANDARD COLOR: BLACK ECO DESCRIPTION P/N AT06-08SC-MM01 KEY-C CONFIGURATION STANDARD COLOR: GREEN DATE BY APPR P/N AT06-08SD-MM01 KEY-D CONFIGURATION STANDARD COLOR: BROWN TITLE: KEYED (2) PLACES PLUG,8 SOCKET,AT,END CAP,KEYED,REDUCED DIA. WIRE SEAL KEYED (2) PLACES KEYED (2) PLACES DWG NO: KEYED (2) PLACES PART NUMBER GREY * BLACK AT06-08SA-MM01 COLOR GREY BROWN AT06-08SA-MMBRN BROWN PART NUMBER COLOR PART NUMBER AT06-08SB-MMGRY GREY AT06-08SC-MMGRY GREY AT06-08SD-MMGRY AT06-08SB-MM01 BLACK AT06-08SC-MMBLK BLACK AT06-08SD-MMBLK AT06-08SC-MM01 GREEN AT06-08SD-MMGRN AT06-08SB-MMGRN AT06-08SB-MMBRN GREEN * BROWN AT06-08SD-MM01 2 * BROWN AT06-08SC-MMBRN 3) Note reference = OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. X SIGNATURES DRAWN: JARRY ITEM Amphenol DATE 03JAN14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: PLUG, 8 SOCKET, AT SERIES, END CAP, KEYED, REDUCED DIAMETER WIRE SEAL THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT06-08SX-MMXXX A3 SHEET 2 OF 2 2 AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 OF: NOTE: SEE PART NUMBER CHART DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED SH: AT06-08SA-MMGRN COLOR KEY-D CONFIGURATION A3 GREEN * BLACK GREEN AT06-08SA-MMBLK PART NUMBER KEY-C CONFIGURATION REV: COLOR KEY-B CONFIGURATION AT06-08SX-MMXXX KEY-A CONFIGURATION A Series™ - Contact Size 16 Options (Works with: AT, ATV, AHD-9, ARC, DuraMate and PanelMate Series) Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-18 Stamped & Formed Part Number Description Size AWG Type Part Number Description AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-18 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-18 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-18 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0144 AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 16-20 Stamped & Formed AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 16-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0644 Male Contact - Pin, Gold-plated 16 16-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 16-20 Stamped & Formed AT60-16-0677 Male Contact - Pin, Tin-plated 16 16-20 Stamped & Formed AT62-16-0677 Female Contact - Socket, Tin-plated 16 16-20 Stamped & Formed Description AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AUTK-16 Hand Crimp Tool, Size 16 AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AUTK-100 Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20 AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 Tooling - Machined Contacts Part Number Tooling - Stamped & Formed Contacts Contact Removal Tools (For both Machined or Stamped & Formed Contacts) Part Number ATRT-100 AT11-310-1605 Description MFX-3950 Crimp Die - Size 16, 18-20AWG MFX-3953 Crimp Die - Size 16, 16-18AWG MFX-3975 Crimp Die - Size 16, 14-16AWG MFX-3990 Crimp Die - Size 16, 20-22AWG ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG Contact and Wedgelock Extraction Tool Contact Removal Tool, Plastic, Size 16 Sealing Plugs (For both Machined or Stamped & Formed Contacts) Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10-2023