REVISIONS
REV
ECO
A3
-
DESCRIPTION
RELEASE NEW DWG FORMAT
DATE
BY
APPR
11DEC13
DRP
-
36.8
TITLE: PLUG, 8 SOCKET, AT SERIES, KEYED, STRAIN RELIEF END CAP
REQUIRES CONTACT
RETENTION WEDGE AW8S
1
KEYED (2) PLACES
7
22.2
1
REFER TO SHEET 2 FOR AVAILABLE
CONNECTOR HOUSING COLORS
2. MATERIAL:
HOUSING: THERMOPLASTIC
SEAL: SILICONE RUBBER
AT06-08SX-SRXXX
1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS.
44
DWG NO:
NOTES: UNLESS OTHERWISE SPECIFIED
STRAIN RELIEF END CAP BLACK - ALL CONNECTORS
3. MODIFICATIONS: STRAIN RELIEF END CAP
SH:
1
UNLESS OTHERWISE SPECIFIED
1) All dimensions are in metric(mm).
2) Tolerances are as follows:
1 PL DEC ±0.30
Fractions ±1/64
2 PL DEC ±0.15
Angles ±1°
3 PL DEC ±0.08
X
SIGNATURES
DRAWN:
D.PARKS
Amphenol
DATE
11DEC13
CHECKED:
Sine Systems - www.amphenol-sine.com
44724 Morley Drive
Clinton Township, MI 48036
ENGINEER:
APPROVAL:
MATERIAL SPECIFICATIONS:
CUSTOMER:
CONTACT
SIZE
MIN. INSUL
O.D.
MAX. INSUL
O.D.
16
2.24 mm
(.088 in)
3.68 mm
(.145 in)
TYPICAL
WIRE RANGE
ITEM
PROCESS SPECIFICATIONS:
THIS DRAWING IS SUPPLIED FOR
INFORMATION ONLY. DESIGN FEATURES,
SPECIFICATIONS AND PERFORMANCE DATA SIZE
SHOWN HEREON ARE THE PROPERTY OF
THE AMPHENOL CORPORATION. NO RIGHTS
OF REPRODUCTION ARE IMPLIED. ALL
DIMENSIONS ARE SUBJECT TO NORMAL
SCALE:
MANUFACTURING VARIATIONS.
PLUG, 8 SOCKET, AT SERIES,
KEYED, STRAIN RELIEF END CAP
TYPE
B C-
14 - 20 AWG
NEXT ASS'Y:
NONE
DWG NO:
REVISION
AT06-08SX-SRXXX
SHEET
1
A3
OF
2
2
SEE PART NUMBER CHART
DESCRIPTION
PART NUMBER
QUANTITY
MATERIALS LIST
3) Note reference =
7 CONTACT SIZE AND REAR SEAL WIRE RANGE:
OF:
6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY.
A3
5. MATING PART: AT04-08PX* RECEPTACLE
( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS )
REV:
4. SPECIFICATIONS:
4.1 CURRENT RATING: 13 AMPS
4.2 OPERATING TEMPERATURE: -55°C TO +125°C
4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2
MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC.
4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C.
4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION )
4.6 MATING CYCLE DURABILITY: 100 CYCLES
4.7 RoHS COMPLIANT
REVISIONS
REV
P/N AT06-08SA-SRGRY
KEY-A CONFIGURATION
STANDARD COLOR: GREY
P/N AT06-08SB-SRBK
KEY-B CONFIGURATION
STANDARD COLOR: BLACK
ECO
DESCRIPTION
P/N AT06-08SC-SRGN
KEY-C CONFIGURATION
STANDARD COLOR: GREEN
DATE
BY
APPR
P/N AT06-08SD-SRBR
KEY-D CONFIGURATION
STANDARD COLOR: BROWN
TITLE: PLUG, 8 SOCKET, AT SERIES, KEYED, STRAIN RELIEF END CAP
KEYED
(2) PLACES
KEYED
(2) PLACES
KEYED
(2) PLACES
COLOR
AT06-08SA-SRGRY
COLOR
COLOR
KEY-D CONFIGURATION
PART NUMBER
COLOR
PART NUMBER
GREY
AT06-08SC-SRGRY
GREY
AT06-08SD-SRGRY
AT06-08SB-SRBK
BLACK
AT06-08SC-SRBK
BLACK
AT06-08SD-SRBK
AT06-08SB-SRGN
AT06-08SC-SRGN
GREEN
AT06-08SD-SRGN
AT06-08SB-SRBR
GREEN
* BROWN
GREEN
AT06-08SA-SRGN
BROWN
AT06-08SA-SRBR
BROWN
* BROWN
AT06-08SC-SRBR
SH:
AT06-08SB-SRGRY
A3
GREY
* BLACK
GREEN
AT06-08SA-SRBK
PART NUMBER
KEY-C CONFIGURATION
REV:
GREY
* BLACK
PART NUMBER
KEY-B CONFIGURATION
AT06-08SX-SRXXX
KEY-A CONFIGURATION
DWG NO:
KEYED
(2) PLACES
AT06-08SD-SRBR
2
OF:
DESCRIPTION
PART NUMBER
MATERIALS LIST
QUANTITY
UNLESS OTHERWISE SPECIFIED
AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD
MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. STRAIN RELIEF END
CAPS ARE AVAILABLE IN BLACK ONLY.
1) All dimensions are in metric(mm).
2) Tolerances are as follows:
1 PL DEC ±0.30
Fractions ±1/64
2 PL DEC ±0.15
Angles ±1°
3 PL DEC ±0.08
3) Note reference =
X
SIGNATURES
DRAWN:
D.PARKS
ITEM
Amphenol
DATE
11DEC13
CHECKED:
Sine Systems - www.amphenol-sine.com
44724 Morley Drive
Clinton Township, MI 48036
ENGINEER:
APPROVAL:
MATERIAL SPECIFICATIONS:
CUSTOMER:
OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER.
PROCESS SPECIFICATIONS:
THIS DRAWING IS SUPPLIED FOR
INFORMATION ONLY. DESIGN FEATURES,
SPECIFICATIONS AND PERFORMANCE DATA SIZE
SHOWN HEREON ARE THE PROPERTY OF
THE AMPHENOL CORPORATION. NO RIGHTS
OF REPRODUCTION ARE IMPLIED. ALL
DIMENSIONS ARE SUBJECT TO NORMAL
SCALE:
MANUFACTURING VARIATIONS.
PLUG, 8 SOCKET, AT SERIES,
KEYED, STRAIN RELIEF END CAP
TYPE
B C-
NEXT ASS'Y:
NONE
DWG NO:
REVISION
AT06-08SX-SRXXX
SHEET
2
A3
OF
2
2
NOTE:
A Series™ - Contact Size 16 Options (Works with: AT, ATV, AHD-9, ARC, DuraMate and PanelMate Series)
Stamped & Formed Contacts, Sockets & Pins
Machined Contacts, Sockets & Pins
Size
AWG
Type
AT60-215-1631
Male Contact - Pin, Gold-plated
16
14
Machined
AT60-14-0144
Male Contact - Pin, Gold-plated
16
14-16
Stamped & Formed
Part Number
Description
Size
AWG
Type
Part Number
Description
AT62-209-1631
Female Contact - Socket, Gold-plated
16
14
Machined
AT62-14-0144
Female Contact - Socket, Gold-plated
16
14-16
Stamped & Formed
AT60-215-16141
Male Contact - Pin, Nickel-plated
16
14
Machined
AT60-14-0122
Male Contact - Pin, Nickel-plated
16
14-16
Stamped & Formed
AT62-209-16141
Female Contact - Socket, Nickel-plated
16
14
Machined
AT62-14-0122
Female Contact - Socket, Nickel-plated
16
14-16
Stamped & Formed
AT60-202-1631
Male Contact - Pin, Gold-plated
16
16-20
Machined
AT60-16-0144
Male Contact - Pin, Gold-plated
16
16-18
Stamped & Formed
Machined
AT62-16-0144
Female Contact - Socket, Gold-plated
16
16-18
Stamped & Formed
Male Contact - Pin, Nickel-plated
16
16-18
Stamped & Formed
AT62-201-1631
Female Contact - Socket, Gold-plated
16
16-20
AT60-202-16141
Male Contact - Pin, Nickel-plated
16
16-20
Machined
AT60-16-0122
AT62-201-16141
Female Contact - Socket, Nickel-plated
16
16-20
Machined
AT62-16-0122
Female Contact - Socket, Nickel-plated
16
16-18
Stamped & Formed
AT60-202-1631-22
Male Contact - Pin, Gold-plated
16
22-24
Machined
AT60-16-0644
Male Contact - Pin, Gold-plated
16
18-20
Stamped & Formed
AT62-201-1631-22
Female Contact - Socket, Gold-plated
16
22-24
Machined
AT62-16-0644
Female Contact - Socket, Gold-plated
16
18-20
Stamped & Formed
AT60-202-16141-22
Male Contact - Pin, Nickel-plated
16
22-24
Machined
AT60-16-0622
Male Contact - Pin, Nickel-plated
16
18-20
Stamped & Formed
AT62-201-16141-22
Female Contact - Socket, Nickel-plated
16
22-24
Machined
AT62-16-0622
Female Contact - Socket, Nickel-plated
16
18-20
Stamped & Formed
AT60-16-0844
Male Contact - Pin, Gold-plated
16
20-22
Stamped & Formed
AT62-16-0844
Female Contact - Socket, Gold-plated
16
20-22
Stamped & Formed
Description
AT60-16-0822
Male Contact - Pin, Nickel-plated
16
20-22
Stamped & Formed
AUTK-20
Hand Crimp Tool, Size 20
AT62-16-0822
Female Contact - Socket, Nickel-plated
16
20-22
Stamped & Formed
AUTK-100
Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20
CA-5D12
Universal Hand Crimp Tool, Size 12/16/20
CA-5E12
Pneumatic Crimp Tool, Size 12/16/20
Tooling - Machined Contacts
Part Number
Tooling - Stamped & Formed Contacts
MFX-3950
Crimp Die - Size 16, 18-20AWG
MFX-3953
Crimp Die - Size 16, 16-18AWG
MFX-3975
Crimp Die - Size 16, 14-16AWG
MFX-3990
Crimp Die - Size 16, 20-22AWG
ATT-16-00
Hand Crimp Tool - Size 16, 14-16AWG
ATT-16-01
Hand Crimp Tool - Size 16, 18-20AWG
ATT-1612-03
Hand Crimp Tool - Size 16, 20-22AWG
Contact Removal Tools (For both Machined or Stamped & Formed Contacts)
Part Number
ATRT-100
AT11-310-1605
Description
Contact and Wedgelock Extraction Tool
Contact Removal Tool, Plastic, Size 16
Sealing Plugs (For both Machined or Stamped & Formed Contacts)
Part Number
A114017
A114017-SR
AT13-217-1605
AT13-217-1605-SR
Description
Sealing Plug, Size 16, White
Sealing Plug, Size 16, SR01 Series, Black
Locking Sealing Plug, Size 16, Grey
Locking Sealing Plug, Size 16, SR01 Series, Red
Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 08/2023
