AT06-12SB-SR2BK

REVISIONS REV ECO A3 - DESCRIPTION RELEASE NEW DWG FORMAT DATE BY APPR 11EC13 DRP - 45 TITLE: PLUG, 12 POS, AT, KEYED, STRAIN RELIEF, REDUCED DIA SEAL REQUIRES CONTACT RETENTION WEDGE AW12S 7 REDUCED DIAMETER WIRE SEAL 21 DWG NO: 1 KEYED 3 PLACES NOTES: UNLESS OTHERWISE SPECIFIED STRAIN RELIEF END CAP BLACK - ALL CONNECTORS 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. 1 AT06-12SX-SR2XX 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER REFER TO SHEET 2 FOR AVAILABLE CONNECTOR HOUSING COLORS 3. MODIFICATIONS: STRAIN RELIEF END CAP; REDUCED DIA. WIRE SEAL REV: A3 SH: 1 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: X SIGNATURES DRAWN: MIN. INSUL O.D. MAX. INSUL O.D. 16 1.35 mm (.053 in) 3.05 mm (.120 in) TYPICAL WIRE RANGE Amphenol DATE 11DEC13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: CONTACT SIZE D.PARKS ITEM PROCESS SPECIFICATIONS: PLUG,12 SOCKET,AT SERIES,KEYED,STRAIN RELIEF END CAP, REDUCED DIA SEAL THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- 14 - 20 AWG NEXT ASS'Y: NONE DWG NO: REVISION AT06-12SX-SR2XX SHEET 1 A3 OF 2 2 SEE SHEET 2 DESCRIPTION PART NUMBER MATERIALS LIST 43.5 QUANTITY 5. MATING PART: AT04-12PX* RECEPTACLE ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) OF: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT REVISIONS REV P/N AT06-12SA-SR2GY KEY-A CONFIGURATION STANDARD COLOR: GREY P/N AT06-12SB-SR2BK KEY-B CONFIGURATION STANDARD COLOR: BLACK ECO DESCRIPTION P/N AT06-12SC-SR2GN KEY-C CONFIGURATION STANDARD COLOR: GREEN DATE BY APPR P/N AT06-12SD-SR2BR KEY-D CONFIGURATION STANDARD COLOR: BROWN TITLE: PLUG, 12 POS, AT, KEYED, STRAIN RELIEF, REDUCED DIA SEAL KEYED (3) PLACES KEYED (3) PLACES KEYED (3) PLACES KEYED (3) PLACES DWG NO: COLOR PART NUMBER KEY-B CONFIGURATION COLOR PART NUMBER KEY-C CONFIGURATION COLOR AT06-12SX-SR2XX KEY-A CONFIGURATION KEY-D CONFIGURATION PART NUMBER PART NUMBER COLOR AT06-12SB-SR2GY GREY AT06-12SC-SR2GY GREY AT06-12SD-SR2GY AT06-12SA-SR2BK AT06-12SB-SR2BK BLACK AT06-12SC-SR2BK BLACK AT06-12SD-SR2BK GREEN AT06-12SA-SR2GN * BLACK GREEN AT06-12SB-SR2GN AT06-12SC-SR2GN GREEN AT06-12SD-SR2GN BROWN AT06-12SA-SR2BR BROWN AT06-12SB-SR2BR GREEN * BROWN AT06-12SC-SR2BR SH: GREY A3 AT06-12SA-SR2GY REV: GREY * BLACK AT06-12SD-SR2BR 2 * BROWN OF: DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. STRAIN RELIEF END CAPS ARE AVAILABLE IN BLACK ONLY. UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: D.PARKS Amphenol DATE 11DEC13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. ITEM MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: PLUG,12 SOCKET,AT SERIES,KEYED,STRAIN RELIEF END CAP, REDUCED DIA SEAL THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT06-12SX-SR2XX SHEET 2 A3 OF 2 2 NOTE: AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plugs Part Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 03/2022