AT06-12SD

REVISIONS REV ECO A3 - DESCRIPTION RELEASE NEW DRAWING FORMAT DATE BY APPR 02JAN14 JARRY - 45.6 TITLE: PLUG, 12 SOCKET, AT SERIES, KEYED REQUIRES CONTACT RETENTION WEDGE AW12S 7 31.3 18.3 DWG NO: 1 KEYWAY (3) PLACES AT06-12SX-XXX NOTES: UNLESS OTHERWISE SPECIFIED 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER REV: 1 REFER TO SHEET 2 FOR AVAILABLE CONNECTOR COLORS A3 SH: 3. MODIFICATIONS: N/A 1 UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 X 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: SIGNATURES DRAWN: JARRY ITEM Amphenol DATE 02JAN14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: 5. MATING PART: AT04-12PX* RECEPTACLE ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. TYPICAL WIRE RANGE 16 2.24 mm (.088 in) 3.68 mm (.145 in) 14 - 20 AWG PLUG, 12 SOCKET, AT SERIES, KEYED CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT06-12SX-XXX SHEET 1 A3 OF 2 2 SEE SHEET 2 DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY 3) Note reference = OF: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 13 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT REVISIONS REV P/N AT06-12SA KEY-A CONFIGURATION STANDARD COLOR: GREY P/N AT06-12SB KEY-B CONFIGURATION STANDARD COLOR: BLACK ECO DESCRIPTION DATE BY APPR P/N AT06-12SD KEY-D CONFIGURATION STANDARD COLOR: BROWN P/N AT06-12SC KEY-C CONFIGURATION STANDARD COLOR: GREEN TITLE: PLUG, 12 SOCKET, AT SERIES, KEYED KEYWAY (3) PLACES KEYWAY (3) PLACES KEYWAY (3) PLACES KEYWAY (3) PLACES DWG NO: AT06-12SA COLOR GREY BROWN AT06-12SA-BRN BROWN PART NUMBER COLOR PART NUMBER AT06-12SB-GRY GREY AT06-12SC-GRY GREY AT06-12SD-GRY AT06-12SB BLACK AT06-12SC-BLK BLACK AT06-12SD-BLK AT06-12SC GREEN AT06-12SD-GRN AT06-12SB-GRN AT06-12SB-BRN DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = AT06-12SD X SIGNATURES DRAWN: JARRY ITEM Amphenol DATE 02JAN14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: PLUG, 12 SOCKET, AT SERIES, KEYED CUSTOMER: OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT06-12SX-XXX SHEET 2 A3 OF 2 2 AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. * BROWN AT06-12SC-BRN OF: NOTE: GREEN * BROWN 2 AT06-12SA-GRN COLOR SH: GREEN * BLACK GREEN AT06-12SA-BLK PART NUMBER KEY-D CONFIGURATION A3 GREY * BLACK PART NUMBER KEY-C CONFIGURATION REV: COLOR KEY-B CONFIGURATION AT06-12SX-XXX KEY-A CONFIGURATION AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plugs Part Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 03/2022