AT06-2S-D1224V

REVISIONS LASER ENGRAVE POLARITY, CONTACT NUMBER, DIODE SYMBOL, AND SEAL TYPE AS SHOWN IN THIS AREA. REV ECO DESCRIPTION A1 - RELEASE NEW DRAWING 22JUN18 DATE A2 - UPDATE DRAWING 25MAR19 BY APPR SULLEN TOMMY JAH 2 XX 17.6 + 1 STRAIN RELIEF END CAP - CLEAR TITLE: SEE PART NUMBER CHART BELOW. XX = SEAL CODE. RD IF REDUCED DIA., BLANK IF STANDARD SEAL. 7 AT SERIES, 2-WAY, PLUG, 12V OR 24V, CLEAR END CAP, BLK BODY NOTES: UNLESS OTHERWISE SPECIFIED CONNECTOR BODY - BLACK 1. MATERIAL: HOUSING: THERMOPLASTIC, BLACK SEAL: SILICONE RUBBER REQUIRES BLACK CONTACT RETENTION WEDGE: AW2S-LED ( SOLD SEPARATELY ) 2. MODIFICATIONS: DIODE; STRAIN RELIEF END CAP -24VDC AND -12VDC 2 RECTIFIER DIODE REV: + 1 +24VDC AND +12VDC 1 1.35 mm (.053 in) SEE P/N CHART DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY 3.05 mm (.120 in) TYPICAL WIRE RANGE UNLESS OTHERWISE SPECIFIED PART NUMBER CHART 14 - 20 AWG SEAL PART NUMBER STANDARD AT06-2S-D1224V STANDARD SEAL: 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: MATERIAL SPECIFICATIONS: CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. TYPICAL WIRE RANGE 16 2.24 mm (.088 in) 3.68 mm (.145 in) 14 - 20 AWG REDUCED DIAMETER AT06-2S-D1224VR Amphenol DATE SULLEN.ZHANG 22JUN18 ORION.LI 22JUN18 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: TOMMY.XIE 22JUN18 CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. AT SERIES, 2-WAY, PLUG, 12V OR 24V, CLEAR END CAP, BLACK BODY TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT06-2S-D1224VX SHEET 1 A2 OF 1 1 REDUCED DIAMTER SEAL: OF: 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: 16 SH: CONNECTOR DIAGRAM 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. MAX. INSUL O.D. A2 5. MATING PART: AT04-2P* RECEPTACLE ( * = MODIFICATIONS AND COLORS ) MIN. INSUL O.D. AT06-2S-D1224VX 44.7 4. RECTIFIER DIODES SPECIFICATIONS: 4.1 PEAK REVERSE VALUE: 1000 VOLTS; 4.2 FORWARD VOLTAGE: