AT06-2S-LED1220

REVISIONS LASER ENGRAVE POLARITY, CONTACT NUMBER, VOLTAGE, SEAL TYPE, AND LED COLOR CODE AS SHOWN IN THIS AREA. ECO DATE BY APPR A1 - RELEASE CUSTOMER DRAWING 01MAY14 DRP - A2 - ADDED -LED1202 TO CHART ADDED RD TO LASER ENGRAVING 14MAR19 JAH - 2 1 12VDC YYY XX REV 17.6 DESCRIPTION STRAIN RELIEF END CAP - CLEAR AT SERIES, 2-WAY, PLUG, LED, 12V, CLEAR END CAP, GREY BODY 7 TITLE: SEE PART NUMBER CHART BELOW. YYY = LED COLOR CODE. XX = SEAL CODE. RD IF REDUCED DIA., BLANK IF STANDARD SEAL. 19.5 CONNECTOR BODY - GREY REQUIRES BLACK CONTACT RETENTION WEDGE: AW2S-LED ( SOLD SEPARATELY ) 43 AT06-2S-LED12XX 1. MATERIAL: HOUSING: THERMOPLASTIC; GREY SEAL: SILICONE RUBBER -12VDC 2 DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED PART NUMBER CHART 2. MODIFICATIONS: LIGHT EMITTING DIODE; STRAIN RELIEF END CAP OPTIONAL REDUCED DIAMETER SEAL REVERSE CURRENT PART NUMBER WHITE WHT STANDARD 50 MICROAMPS MAXIMUM AT06-2S-LED1201 WHITE WHT REDUCED DIA. 50 MICROAMPS MAXIMUM AT06-2S-LED1202 RED RED STANDARD 10 MICROAMPS MAXIMUM AT06-2S-LED1220 GREEN GRN STANDARD 10 MICROAMPS MAXIMUM AT06-2S-LED1230 + 1 +12VDC LED CONNECTOR DIAGRAM 1 CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. 16 1.35 mm (.053 in) 3.05 mm (.120 in) TYPICAL WIRE RANGE 14 - 20 AWG SEE PART NUMBER CHART CONNECTOR, LED, 12 VDC, LESS CONTACT WEDGE DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X STANDARD SEAL: SIGNATURES DRAWN: D.PARKS ITEM Amphenol DATE 01MAY14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CONTACT SIZE MIN. INSUL O.D. 2.24 mm (.088 in) MAX. INSUL O.D. 3.68 mm (.145 in) TYPICAL WIRE RANGE CUSTOMER: PROCESS SPECIFICATIONS: 14 - 20 AWG THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. AT SERIES, 2-WAY, PLUG, LED, 12V, CLEAR END CAP, GREY BODY TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT06-2S-LED12XX SHEET 1 A2 OF 1 1 REDUCED DIAMETER SEAL: OF: 7 CONTACT SIZE AND REAR SEAL WIRE RANGE 16 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. LED SH: 5. MATING PART: AT04-2P* RECEPTACLE ( * = MODIFICATIONS AND COLORS ) SEAL A2 4. LED SPECIFICATIONS: 4.1 FORWARD CURRENT: 7.5 MILLIAMPS TYPICAL; 10 MILLIAMPS MAXIMUM 4.2 REVERSE CURRENT: SEE PART NUMBER CHART 4.3 POWER DISSIPATION: 120 MILLIWATTS MAXIMUM 4.4 FORWARD VOLTAGE: 14 VOLTS MAXIMUM 4.5 REVERSE VOLTAGE: 5 VOLTS MAXIMUM 4.6 LUMINOUS INTENSITY: 1 CANDELA @ 12 VOLTS LED COLOR CODE ( YYY ) REV: 3. CONNECTOR SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.3 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.4 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.5 MATING CYCLE DURABILITY: 100 CYCLES 3.6 ROHS COMPLIANT LED COLOR A Series™ - Contact Size 16 Options (Works with: AT, ATV, AHD-9, ARC, DuraMate and PanelMate Series) Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-18 Stamped & Formed Part Number Description Size AWG Type Part Number Description AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-18 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-18 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-18 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0144 AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 16-20 Stamped & Formed AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 16-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0644 Male Contact - Pin, Gold-plated 16 16-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 16-20 Stamped & Formed AT60-16-0677 Male Contact - Pin, Tin-plated 16 16-20 Stamped & Formed AT62-16-0677 Female Contact - Socket, Tin-plated 16 16-20 Stamped & Formed Description AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AUTK-16 Hand Crimp Tool, Size 16 AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AUTK-100 Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20 AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 Tooling - Machined Contacts Part Number Tooling - Stamped & Formed Contacts Contact Removal Tools (For both Machined or Stamped & Formed Contacts) Part Number ATRT-100 AT11-310-1605 Description MFX-3950 Crimp Die - Size 16, 18-20AWG MFX-3953 Crimp Die - Size 16, 16-18AWG MFX-3975 Crimp Die - Size 16, 14-16AWG MFX-3990 Crimp Die - Size 16, 20-22AWG ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG Contact and Wedgelock Extraction Tool Contact Removal Tool, Plastic, Size 16 Sealing Plugs (For both Machined or Stamped & Formed Contacts) Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10-2023