AT06-2S-LED12VR1-OM

REVISIONS 18.7 NOTES: UNLESS OTHERWISE SPECIFIED REV ECO DESCRIPTION A1 - RELEASE DRAWING A2 - A3 - DATE BY APPR 18MAR20 SULLEN TOMMY UPDATE LATCH AND DIMENSION 18SEP20 SULLEN TOMMY CHANGE MATERIAL OF HOUSING 20DEC21 MILO TOMMY 43.7 TITLE: 9 2. MODIFICATIONS: LIGHT EMITTING DIODE (GREEN), REVERSE VOLTAGE PROTECTION CIRCUIT (RVPC). GREEN LED GREEN LED R1 RESISTOR: TYPE 0805, R330Ω, 1/8W SMD T.V.S. DIODE: 400W, 14V, P4SMAJ14CA 1 PART NUMBER All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: 14 - 20 AWG (2.0-0.5mm²) STANDARD MATERIAL SPECIFICATIONS: AT06-2S-LED12V01-OM REDUCED DIAMETER AT06-2S-LED12VR1-OM PROCESS SPECIFICATIONS: Amphenol DATE MILO.DONG 20DEC21 SULLEN.ZHANG 20DEC21 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: TOMMY.XIE ITEM 21DEC21 AT SERIES,2-WAY,PLUG,LED,12V, AMBER BODY,RVP CIRCUIT,OVERMOLD THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: REVISION B C- AT06-2S-LED12VX1-OM A3 NEXT ASS'Y: NONE SHEET 1 OF 1 1 PART NUMBER CHART 1) 2) 1 2 3 CUSTOMER: 3.68 mm (.145 in) OF: SEE PART NUMBER CHART DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST SEAL CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE SH: 14 - 20 AWG (2.0-0.5mm²) +12VDC LED CONNECTOR DIAGRAM UNLESS OTHERWISE SPECIFIED STANDARD SEAL: 2.24 mm (.088 in) + 1 R2 RESISTOR: TYPE 0805, R0Ω, 1/8W SMD LED: KPA-1606ZGC-G TYPICAL CONTACT MIN. INSUL MAX. INSUL O.D. O.D. WIRE RANGE SIZE 16 RESISTOR (3X) R1 COMPONENT TYPES: REDUCED DIAMETER SEAL: 3.05 mm (.120 in) RESISTOR R1 R1 9 CONTACT SIZE AND REAR SEAL WIRE RANGE: 1.35 mm (.053 in) SUPPRESSOR DIODE R2 SEE PART NUMBER CHART BELOW. XX = SEAL CODE. RD IF REDUCED DIA., BLANK IF STANDARD SEAL. 8. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 16 -12VDC A3 7. MATING PART: AT04-2P* RECEPTACLE ( * = MODIFICATIONS AND COLORS ) 2 REV: 6. SUPPRESSOR DIODE SPECIFICATIONS: 6.1 STAND-OFF VOLTAGE: 14 VOLTS; 6.2 MAX. FORWARD CURRENT: 5μA @ 14V 6.3 PEAK PULSE POWER DISSIPATION: 400 WATTS REQUIRES BLACK CONTACT RETENTION WEDGE: AW2S-LED ( SOLD SEPARATELY ) LASER ENGRAVE POLARITY, CONTACT NUMBER, VOLTAGE, SEAL TYPE, SPECIAL CIRCUIT TYPE (RVPC), AND LED COLOR CODE AS SHOWN IN THIS AREA. AT06-2S-LED12VX1-OM 5. RESISTOR SPECIFICATIONS: 5.1 RESISTANCE VALUE (R1): 330 OHMS; 5.2 RESISTANCE VALUE (R2): 0 OHMS; 5.3 POWER RATING: 18 WATTS 5.4 MAX.WORKING VOLTAGE: 150 VOLTS CONNECTOR BODY - CLEAR AMBER DWG NO: 4. LED SPECIFICATIONS: 4.1 FORWARD CURRENT: 30 MILLIAMPS TYPICAL; 100 MILLIAMPS MAXIMUM 4.2 REVERSE CURRENT: 50 MICROAMPS MAXIMUM 4.3 POWER DISSIPATION: 120 MILLIWATTS MAXIMUM 4.4 FORWARD VOLTAGE: 4 VOLTS MAXIMUM 4.5 REVERSE VOLTAGE: 5 VOLTS MAXIMUM 13.8 - + 2 1 12VDC RVPC GRN XX 3. CONNECTOR SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.3 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.4 MOISTURE RESISTANCE: IP68 ( IM OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION ) IP69K ( MATED CONDITION ) 3.5 MATING CYCLE DURABILITY: 100 CYCLES 3.6 ROHS COMPLIANT AT SERIES,2-WAY,PLUG,LED,12V,AMBER BODY,RVP CIRCUIT,OVERMOLD 1. MATERIAL: HOUSING: NATURAL ULTEM SEAL: SILICONE RUBBER A Series™ - Contact Size 16 Options (Works with: AT, ATV, AHD-9, ARC, DuraMate and PanelMate Series) Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-18 Stamped & Formed Part Number Description Size AWG Type Part Number Description AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-18 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-18 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-18 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0144 AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 16-20 Stamped & Formed AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 16-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0644 Male Contact - Pin, Gold-plated 16 16-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 16-20 Stamped & Formed AT60-16-0677 Male Contact - Pin, Tin-plated 16 16-20 Stamped & Formed AT62-16-0677 Female Contact - Socket, Tin-plated 16 16-20 Stamped & Formed Description AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AUTK-16 Hand Crimp Tool, Size 16 AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AUTK-100 Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20 AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 Tooling - Machined Contacts Part Number Tooling - Stamped & Formed Contacts Contact Removal Tools (For both Machined or Stamped & Formed Contacts) Part Number ATRT-100 AT11-310-1605 Description MFX-3950 Crimp Die - Size 16, 18-20AWG MFX-3953 Crimp Die - Size 16, 16-18AWG MFX-3975 Crimp Die - Size 16, 14-16AWG MFX-3990 Crimp Die - Size 16, 20-22AWG ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG Contact and Wedgelock Extraction Tool Contact Removal Tool, Plastic, Size 16 Sealing Plugs (For both Machined or Stamped & Formed Contacts) Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10-2023