AT06-3S-RJ120

REVISIONS REV ECO DESCRIPTION DATE BY A3 - RELEASE NEW DWG FORMAT 08JAN14 JARRY A4 - REVISE DIME NSION, 31.7 WAS 31.3 11SEP20 KEVIN APPR TOMMY TITLE: REAR SOLID SEAL LASER MARK "R120" RESISTOR VALUE PLUG, 3 WAY, J1939, 120 OHM FEMALE CONTACT MACHINED, GOLD 2x AT62-201-1631 16.9 18.9 DWG NO: WEDGE AW3S-1939 WIRING DIAGRAM B A 120 OHMS 0.5W MIN. 5% SEAL RETAINING CAP NOTES: UNLESS OTHERWISE SPECIFIED B 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER AT06-3S-RJ120XX A 31.7±0.5 C N/C REV: GREY AT06-3S-RJ120 BLACK AT06-3S-RJ120BK QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: Amphenol DATE KEVIN ORION 11SEP20 11SEP20 TOMMY 11SEP20 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. PROCESS SPECIFICATIONS: PLUG, 3 WAY, J1939, 120 OHM THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- 6 CONTACT SIZE: 16 NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT06-3S-RJ120XX SHEET 1 A4 OF 1 1 PART NUMBER OF: SEE CHART DESCRIPTION PART NUMBER MATERIALS LIST PART NUMBER CHART COLOR 1 4. MATING PART: AT04-3P* RECEPTACLE ( * = MODIFICATIONS AND COLORS ) C FACE VIEW J1939 SH: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT A4 2. MODIFICATIONS: N/A