AT06-3S-SR02BLK

REVISIONS REV ECO A3 40.7±0.6 A4 DESCRIPTION RELEASE NEW DWG FORMAT C0540S A5 DATE BY 08/16/13 DRP APPR UPDATE DIMENSIONS 22JUL16 JONY TOMMY ADD COLOR OPTION 23NOV20 LOUIE TOMMY TITLE: CAVITY "C" 6 REQUIRES CONTACT RETENTION WEDGE AW3S REDUCED DIAMETER WIRE SEAL 19.4 CAVITY "B" CAVITY "A" NOTES: UNLESS OTHERWISE SPECIFIED DWG NO: STRAIN RELIEF END CAP BLACK - ALL CONNECTORS 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 2. MODIFICATIONS: STRAIN RELIEF END CAP; REDUCED DIA. WIRE SEAL COLOR PART NUMBER GREY AT06-3S-SR02GRY BLACK AT06-3S-SR02BLK BLUE AT06-3S-SR02BLU BROWN AT06-3S-SR02BRN GREEN AT06-3S-SR02GRN SEE PART NUMBER CHART PART NUMBER DESCRIPTION QUANTITY DRAWN: CHECKED: X 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: OF: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. REFER TO PART NUMBER CHART FOR AVAILABLE CONNECTOR COLORS PART NUMBER CHART SH: 4. MATING PART: AT04-3P* RECEPTACLE ( * = MODIFICATIONS AND COLORS ) 19.0 REV: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP68(1M OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION) IP69K(MATED CONDITION) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: RED AT06-3S-SR02RED WHITE AT06-3S-SR02WHT CUSTOMER: YELLOW AT06-3S-SR02YEL ORANGE AT06-3S-SR02ORG THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. APPROVAL: MATERIAL SPECIFICATIONS: CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE 16 1.35 mm (.053 in) 3.05 mm (.120 in) 14 - 20 AWG (2.0-0.5mm²) PROCESS SPECIFICATIONS: PLUG, 3 SOCKET, AT SERIES, STRAIN RELIEF END CAP, REDUCED DIAMETER WIRE SEAL TYPE DWG NO: B NEXT ASS'Y: NONE A5 SHEET 1 OF 1 AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plugs Part Part Number A114017 A114017-SR AT13-217-1605 AT13-217-1605-SR Description Sealing Plug, Size 16, White Sealing Plug, Size 16, SR01 Series, Black Locking Sealing Plug, Size 16, Grey Locking Sealing Plug, Size 16, SR01 Series, Red Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 03/2022