AT13-12PA-BM17

REVISIONS REV 44.4 2xØ3.10±0.12x11.18 DP 24.9 RECOMMENDED SCREW: 6-19 [M3.63 x 1.34] THREAD-FORMING SCREW, TORQUE: 11-15 IN-LB [1.24-1.70 NM] DATE BY APPR A1 -- RELEASE NEW DRAWING 14/DEC/18 BROOK TOMMY A2 -- REVISED DRAWING 10JUL20 JHEAD DH ECO DESCRIPTION 11.4 RESERVOIR 6.1 4.1 TITLE: 3xØ6.6 FLANGE SEAL PIN SPACER 9.1 RECOMMENDED SCREW: 4-20 [M3.12 x 1.27] THREAD-FORMING SCREW, TORQUE:6-10 IN-LB [0.68-1.13 NM] 15.5 12xØ1.58 A2 SH: 3.9 38.6 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 X SIGNATURES DRAWN: CHECKED: APPROVAL: MATERIAL SPECIFICATIONS: 6. POTTED CONNECTORS SPECIFIED FOR UP TO 5 P.S.I. APPLICATIONS. PROCESS SPECIFICATIONS: 14/DEC/18 14/DEC/18 TOMMY.XIE 14/DEC/18 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: CUSTOMER: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. Amphenol DATE BROOK.DING ORION.LI BOARDLOCK PCB MOUNT RECEPTACLE, 12 PIN, RA FLANGE, EXT. LGTH, AT SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT13-12PX-BM1X SHEET 1 A2 OF 3 3 UNLESS OTHERWISE SPECIFIED 3) Note reference = 4. MATING PART: AT06-12S* PLUG ( * = MODIFICATIONS ) REF: DT13-12PA-B016, DT13-12PB-B016, DT13-12PC-B016, DT13-12PD-B016 AT13-12PX-BM1X DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY 1) 2) 1 2 3 OF: 35.3 22.2 1 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT 6.4 3.1±0.4 REV: 2. MODIFICATIONS: FLANGE,PCB MOUNT,RIGHT ANGLE, EXTENDED LENGTH SHROUD AT13-12PX-BM1X 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL:SILICONE RUBBER CONTACT: COPPER ALLOY 3xØ2.79±0.12 DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED PCB MNT RECEPT,12PIN,RA FLANGE,EXT LGTH,AT SERIES 4.4 13.3 22.1 35.1 43.2 59.2 49.3 40.6 REVISIONS REV P/N AT13-12PA-BM1X KEY-A CONFIGURATION STANDARD COLOR: GREY ECO DESCRIPTION DATE BY APPR A1 -- RELEASE NEW DRAWING 14/DEC/18 BROOK TOMMY A2 -- REVISED DRAWING 10JUL20 JHEAD DH P/N AT13-12PB-BM1X KEY-B CONFIGURATION STANDARD COLOR: BLACK TITLE: PCB MNT RECEPT,12PIN,RA FLANGE,EXT LGTH,AT SERIES KEYWAY (3)PLACES KEYWAY (3)PLACES TIN TIN NO POTTING POTTING AT13-12PA-BM16 TIN AT13-12PA-BM17 TIN AT13-12PA-BM18 GOLD AT13-12PA-BM19 GOLD NO POTTING POTTING NO POTTING POTTING PART NUMBER AT13-12PB-BM16 AT13-12PB-BM17 AT13-12PB-BM18 A2 GOLD POTTING CONTACT POTTING OR NOT PLATING IN RESERVOIR REV: GOLD NO POTTING PART NUMBER AT13-12PB-BMXX VARIANTS AT13-12PX-BM1X CONTACT POTTING OR NOT PLATING IN RESERVOIR DWG NO: AT13-12PA-BMXX VARIANTS AT13-12PB-BM19 SH: 2 UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 X SIGNATURES DRAWN: CHECKED: 14/DEC/18 14/DEC/18 TOMMY.XIE 14/DEC/18 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: Amphenol DATE BROOK.DING ORION.LI BOARDLOCK PCB MOUNT RECEPTACLE, 12 PIN, RA FLANGE, EXT. LGTH, AT SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT13-12PX-BM1X SHEET 2 A2 OF 3 3 QUANTITY 3) Note reference = OF: AT13-12PX-BM1X DESCRIPTION PART NUMBER MATERIALS LIST REVISIONS REV P/N AT13-12PC-BM1X KEY-C CONFIGURATION STANDARD COLOR: GREEN ECO DESCRIPTION DATE BY APPR A1 -- RELEASE NEW DRAWING 14/DEC/18 BROOK TOMMY A2 -- REVISED DRAWING 10JUL20 JHEAD DH P/N AT13-12PD-BM1X KEY-D CONFIGURATION STANDARD COLOR: BROWN TITLE: KEYWAY (3)PLACES AT13-12PC-BMXX VARIANTS GOLD GOLD POTTING NO POTTING POTTING AT13-12PC-BM16 TIN AT13-12PC-BM17 TIN AT13-12PC-BM18 GOLD AT13-12PC-BM19 GOLD INTERNAL SEALING SURFACE FINISH TO BE 3.2 OR BETTER 41.58 NO POTTING POTTING AT13-12PD-BM19 0.13 3 AT13-12PX-BM1X 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 X DRAWN: CHECKED: MATERIAL SPECIFICATIONS: CUSTOMER: 11.43±0.10 12xØ1.80+0.1 0 RECOMMENDED PCB LAYOUT PROCESS SPECIFICATIONS: BROOK.DING ORION.LI 14/DEC/18 14/DEC/18 TOMMY.XIE 14/DEC/18 Amphenol Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: 6.10±0.10 ITEM BOARDLOCK PCB MOUNT RECEPTACLE, 12 PIN, RA FLANGE, EXT. LGTH, AT SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION AT13-12PX-BM1X SHEET 3 A2 OF 3 3 DESCRIPTION PART NUMBER 4.42±0.05 QUANTITY MATERIALS LIST 6.35±0.05 UNLESS OTHERWISE SPECIFIED SIGNATURES DATE 23.27 35.47 MIN. 4xR7.60 MAX. OF: 13.26±0.08 3) Note reference = RECOMMENDED PANEL CUTOUT AT13-12PD-BM18 22.10±0.08 11.18 3xØ3.43 4xR1.52 4xR2.54 AT13-12PD-BM17 35.08±0.10 2xØ3.94 4xR1.02 POTTING AT13-12PD-BM16 SH: 35.43 NO POTTING A2 49.30 NO POTTING PART NUMBER REV: 59.20 MIN. CONTACT POTTING OR NOT PLATING IN RESERVOIR PART NUMBER AT13-12PX-BM1X TIN AT13-12PD-BMXX VARIANTS DWG NO: CONTACT POTTING OR NOT PLATING IN RESERVOIR TIN PCB MNT RECEPT,12PIN,RA FLANGE,EXT LGTH,AT SERIES KEYWAY (3)PLACES