AT13-12PC-BM04

REVISIONS 2xØ3.10±0.12x11.18 DP 39.5 RECOMMENDED SCREW: 6-19 [M3.63 x 1.34] THREAD-FORMING SCREW, TORQUE: 11-15 IN-LB [1.24-1.70 NM] REV 24.9 ECO DESCRIPTION DATE BY APPR A1 -- RELEASE NEW DRAWING 19JUN18 JONY TOMMY A2 -- REVISED DRAWING 10JUL20 JHEAD DH 11.4 RESERVOIR 6.1 4.1 TITLE: 49.3 PCB MOUNT RECEPTACLE,12PIN,RA FLANGE,AT SERIES 59.2 4.4 13.3 22.1 35.1 43.2 40.6 3XØ6.6 FLANGE SEAL 9.1 PIN SPACER 3xØ2.79±0.12 15.5 6.4 12XØ1.58 3.1±0.4 REV: 2. MODIFICATIONS: FLANGE,PCB MOUNT,RIGHT ANGLE A2 SH: 3.9 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 6. POTTED CONNECTORS SPECIFIED FOR UP TO 5 P.S.I. APPLICATIONS. 38.6 REF: DT13-12PA, DT13-12PB, DT13-12PC, DT13-12PD, AT13-12PX-BMXX DT13-12PA-G003, DT13-12PB-G003, DT13-12PC-G003, DT13-12PD-G003 DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: 19JUN18 19JUN18 TOMMY.XIE 19JUN18 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: Amphenol DATE JONY.XIE ORION.LI BOARDLOCK PCB MOUNT RECEPTACLE, 12 PIN, RA FLANGE, AT SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT13-12PX-BMXX SHEET 1 A2 OF 3 3 4. MATING PART: AT06-12S* PLUG ( * = MODIFICATIONS ) 22.2 OF: 35.3 1 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT AT13-12PX-BMXX 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL:SILICONE RUBBER CONTACT: COPPER ALLOY DWG NO: RECOMMENDED SCREW: 4-20 [M3.12 x 1.27] THREAD-FORMING SCREW, NOTES: UNLESS OTHERWISE SPECIFIED TORQUE:6-10 IN-LB [0.68-1.13 NM] REVISIONS REV ECO DESCRIPTION DATE BY APPR A1 -- RELEASE NEW DRAWING 19JUN18 JONY TOMMY A2 -- REVISED DRAWING 10JUL20 JHEAD DH P/N AT13-12PA-BMXX KEY-A CONFIGURATION STANDARD COLOR: GREY TITLE: P/N AT13-12PB-BMXX KEY-B CONFIGURATION STANDARD COLOR: BLACK PCB MOUNT RECEPTACLE,12PIN,RA FLANGE,AT SERIES KEYWAY (2)PLACES KEYWAY (2)PLACES GOLD GOLD NO POTTING POTTING AT13-12PA-BM01 GOLD AT13-12PA-BM02 GOLD AT13-12PA-BM03 TIN AT13-12PA-BM04 TIN NO POTTING POTTING NO POTTING POTTING PART NUMBER AT13-12PB-BM01 AT13-12PB-BM02 AT13-12PB-BM03 A2 TIN POTTING CONTACT POTTING OR NOT PLATING IN RESERVOIR PART NUMBER REV: TIN NO POTTING AT13-12PB-BMXX VARIANTS AT13-12PX-BMXX CONTACT POTTING OR NOT PLATING IN RESERVOIR DWG NO: AT13-12PA-BMXX VARIANTS AT13-12PB-BM04 SH: 2 UNLESS OTHERWISE SPECIFIED All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: 19JUN18 19JUN18 TOMMY.XIE 19JUN18 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: Amphenol DATE JONY.XIE ORION.LI BOARDLOCK, PCB MOUNT RECEPTACLE, 12 PIN, RA FLANGE, AT SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT13-12PX-BMXX SHEET 2 A2 OF 3 3 QUANTITY 1) 2) 1 2 3 OF: AT13-12PX-BMXX DESCRIPTION PART NUMBER MATERIALS LIST REVISIONS REV P/N AT13-12PC-BMXX KEY-C CONFIGURATION STANDARD COLOR: GREEN ECO DESCRIPTION DATE BY APPR A1 -- RELEASE NEW DRAWING 19JUN18 JONY TOMMY A2 -- REVISED DRAWING 10JUL20 JHEAD DH P/N AT13-12PD-BMXX KEY-D CONFIGURATION STANDARD COLOR: BROWN TITLE: KEYWAY (2)PLACES AT13-12PC-BMXX VARIANTS TIN TIN POTTING NO POTTING POTTING AT13-12PC-BM01 GOLD AT13-12PC-BM02 GOLD AT13-12PC-BM03 TIN AT13-12PC-BM04 TIN INTERNAL SEALING SURFACE FINISH TO BE 3.2 OR BETTER 41.58 NO POTTING POTTING AT13-12PD-BM04 0.13 3 AT13-12PX-BMXX 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 X DRAWN: CHECKED: MATERIAL SPECIFICATIONS: CUSTOMER: 6.10±0.10 12xØ1.80+0.1 0 RECOMMENDED PCB LAYOUT PROCESS SPECIFICATIONS: 19JUN18 19JUN18 TOMMY.XIE 19JUN18 Amphenol Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: 11.43±0.10 JONY.XIE ORION.LI BOARDLOCK, PCB MOUNT RECEPTACLE, 12 PIN, RA FLANGE, AT SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION AT13-12PX-BMXX SHEET 3 A2 OF 3 3 PART NUMBER DESCRIPTION 4.42±0.05 QUANTITY MATERIALS LIST 6.35±0.05 UNLESS OTHERWISE SPECIFIED SIGNATURES DATE 23.27 35.47 MIN. 4xR7.60 MAX. OF: 13.26±0.08 3) Note reference = RECOMMENDED PANEL CUTOUT AT13-12PD-BM03 22.10±0.08 11.18 3xØ3.43 4xR1.52 4xR2.54 AT13-12PD-BM02 35.08±0.10 2xØ3.94 4xR1.02 POTTING AT13-12PD-BM01 SH: 35.43 NO POTTING A2 49.30 NO POTTING PART NUMBER REV: 59.20 MIN. CONTACT POTTING OR NOT PLATING IN RESERVOIR PART NUMBER AT13-12PX-BMXX GOLD AT13-12PD-BMXX VARIANTS DWG NO: CONTACT POTTING OR NOT PLATING IN RESERVOIR GOLD PCB MOUNT RECEPTACLE,12PIN,RA FLANGE,AT SERIES KEYWAY (2)PLACES