REVISIONS
61
45.0
4-R4.5
REV
ECO
DESCRIPTION
DATE
BY
A3
-
RELEASE NEW DRAWING FORMAT
10/23/13
JARRY
-
A4
-
ADD PANEL CUTOUTS VIEW
11/20/15
JARRY
TOMMY
WILL ACCEPT PLASTIC SELF
THREAD SCREWS: EXAMPLE: ST4.8
APPR
END CAP
25.0
RECOMMENDED TORQUE
VALUES: 1.9-2.2 N.M
TITLE:
2X Ø4
AT,13 PIN RECEPTACLE. W/ FLANGE & WIRE SEAL
75.7
21.4
41.1
18.9
2.8
46
61.00
6
2-Ø5.00
32
NOTES: UNLESS OTHERWISE SPECIFIED
25.50
REV:
34
A4
1. MATERIAL:
HOUSING: THERMOPLASTIC; COLOR: BLACK
SEAL: SILICONE RUBBER
4-R4.80
RECOMMENDED PANEL CUTOUTS
QUANTITY
UNLESS OTHERWISE SPECIFIED
CONTACT
SIZE
MIN. INSUL
O.D.
MAX. INSUL
O.D.
TYPICAL
WIRE RANGE
CURRENT
RATING
16
2.24 mm
(.088 in)
3.68 mm
(.145 in)
14-20 AWG
13 AMPS
12
3.40 mm
(.134 in)
4.95 mm
(.195 in)
1) All dimensions are in metric(mm).
2) Tolerances are as follows:
1 PL DEC ±0.30
Fractions ±1/64
2 PL DEC ±0.15
Angles ±1°
3 PL DEC ±0.08
3) Note reference =
X
JARRY
Amphenol
DATE
10/23/13
CHECKED:
Sine Systems - www.amphenol-sine.com
44724 Morley Drive
Clinton Township, MI 48036
ENGINEER:
APPROVAL:
MATERIAL SPECIFICATIONS:
CUSTOMER:
PROCESS SPECIFICATIONS:
10-14 AWG
SIGNATURES
DRAWN:
THIS DRAWING IS SUPPLIED FOR
INFORMATION ONLY. DESIGN FEATURES,
SPECIFICATIONS AND PERFORMANCE DATA SIZE
SHOWN HEREON ARE THE PROPERTY OF
THE AMPHENOL CORPORATION. NO RIGHTS
OF REPRODUCTION ARE IMPLIED. ALL
DIMENSIONS ARE SUBJECT TO NORMAL
SCALE:
MANUFACTURING VARIATIONS.
AT SERIES, 13 PIN RECEPTACLE W/
FLANGE & WIRE SEAL
TYPE
B C-
25 AMPS
NEXT ASS'Y:
ITEM
NONE
DWG NO:
REVISION
AT1612-13PB
SHEET
A4
1
OF
1
1
AT1612-13PB
DESCRIPTION
PART NUMBER
MATERIALS LIST
6 SIZE 12 CONTACTS
(2 PLACES)
6 CONTACT SIZE AND REAR SEAL WIRE RANGE:
OF:
5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY.
1
4. MATING PART: AT1612-13SB* PLUG
( * = MODIFICATIONS )
SH:
2. MODIFICATIONS: WIRE SEAL, END CAP, NO GASKET
3. SPECIFICATIONS:
3.1 CURRENT RATING: SEE NOTE 6
3.2 OPERATING TEMPERATURE: -55°C TO +125°C
3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2
MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC.
3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C.
3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION )
3.6 MATING CYCLE DURABILITY: 100 CYCLES
3.7 RoHS COMPLIANT
AT1612-13PB
SIZE 16 CONTACTS
(11 PLACES)
INTERNAL SEALING SUFACE BE
OR BETTER
0.13
DWG NO:
45.50
AT Series™ - Contact Size 16 Options
Stamped & Formed Contacts, Sockets & Pins
Machined Contacts, Sockets & Pins
Size
AWG
Type
Part Number
Description
Size
AWG
Type
AT60-215-1631
Male Contact - Pin, Gold-plated
16
14
Machined
AT60-14-0144
Male Contact - Pin, Gold-plated
16
14-16
Stamped & Formed
AT62-209-1631
Female Contact - Socket, Gold-plated
16
14
Machined
AT62-14-0144
Female Contact - Socket, Gold-plated
16
14-16
Stamped & Formed
AT60-215-16141
Male Contact - Pin, Nickel-plated
16
14
Machined
AT60-14-0122
Male Contact - Pin, Nickel-plated
16
14-16
Stamped & Formed
AT62-209-16141
Female Contact - Socket, Nickel-plated
16
14
Machined
AT62-14-0122
Female Contact - Socket, Nickel-plated
16
14-16
Stamped & Formed
AT60-202-1631
Male Contact - Pin, Gold-plated
16
16-20
Machined
AT60-16-0144
Male Contact - Pin, Gold-plated
16
16-18
Stamped & Formed
Part Number
Description
AT62-201-1631
Female Contact - Socket, Gold-plated
16
16-20
Machined
AT62-16-0144
Female Contact - Socket, Gold-plated
16
16-18
Stamped & Formed
AT60-202-16141
Male Contact - Pin, Nickel-plated
16
16-20
Machined
AT60-16-0122
Male Contact - Pin, Nickel-plated
16
16-18
Stamped & Formed
AT62-201-16141
Female Contact - Socket, Nickel-plated
16
16-20
Machined
AT62-16-0122
Female Contact - Socket, Nickel-plated
16
16-18
Stamped & Formed
Male Contact - Pin, Gold-plated
16
18-20
Stamped & Formed
AT60-202-1631-22
Male Contact - Pin, Gold-plated
16
22-24
Machined
AT60-16-0644
AT62-201-1631-22
Female Contact - Socket, Gold-plated
16
22-24
Machined
AT62-16-0644
Female Contact - Socket, Gold-plated
16
18-20
Stamped & Formed
AT60-202-16141-22
Male Contact - Pin, Nickel-plated
16
22-24
Machined
AT60-16-0622
Male Contact - Pin, Nickel-plated
16
18-20
Stamped & Formed
Machined
AT62-16-0622
Female Contact - Socket, Nickel-plated
16
18-20
Stamped & Formed
AT60-16-0844
Male Contact - Pin, Gold-plated
16
20-22
Stamped & Formed
AT62-16-0844
Female Contact - Socket, Gold-plated
16
20-22
Stamped & Formed
AT60-16-0822
Male Contact - Pin, Nickel-plated
16
20-22
Stamped & Formed
AT62-16-0822
Female Contact - Socket, Nickel-plated
16
20-22
Stamped & Formed
AT62-201-16141-22
Female Contact - Socket, Nickel-plated
16
22-24
Tooling - Machined Contacts
Part
Part Number
CA-5D12
Description
Universal Hand Crimp Tool, Size 12/16/20
(Machined contacts only)
Tooling - Stamped & Formed Contacts
Part
CA-5E12
Pneumatic Crimp Tool, Size 12/16/20
(Machined contacts only)
Contact Removal Tools
Part
Part Number
ATRT-100
AT11-310-1605
A114017
Description
Used for removal of contacts for A Series™ products
Part Number
Description
MFX-3950
Crimp Die - Size 16, 18-20AWG (S&F contacts only)
MFX-3953
Crimp Die - Size 16, 16-18AWG (S&F contacts only)
MFX-3975
Crimp Die - Size 16, 14-16AWG (S&F contacts only)
MFX-3990
Crimp Die - Size 16, 20-22AWG (S&F contacts only)
ATT-16-00
Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only)
ATT-16-01
Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only)
ATT-1612-03
Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only)
Contact Removal Tool, Plastic, Size 16
Sealing Plug, Size 16, White
Amphenol Sine Systems
44724 Morley Drive
Clinton Township, MI 48036 USA
www.amphenol-sine.com
09/2021
