ATC-10-3PN

IDS-6-8 Amphenol® Amphenol AT Circular Connector Series Amphenol Industrial Operations introduces a 3 and 5-pole plug to enhance its AT Circular connector series. AT Circular plugs feature Amphenol’s AT contact technology and are designed to perform in the demanding applications found on construction and farm equipment, plus truck environments. The AT Circular series is a molded thermoplastic connector with a positive bayonet retention system and sealed by redundant grommet wire sealing. The square flange design ensures a drop in replacement to existing panel designs and the jam nut version makes for easy installation. The 9 pin black receptacles are in accordance with the interface of the J1939 diagnostic connector. Features: • Jam Nut and Square Flange Mounting Solutions • Quick Mating and Unmating - Reverse Bayonet Coupling • Environmentally Sealed - Sealed against moisture and contaminants • Contact retention system which decreases installation costs and increases reliability • RoHS Compliant Product AT Contact technology is already used successfully at major OEM’s and features machined contacts with both Nickel and Gold plating. www.amphenol-industrial.com Material Specification Electrical Specification based on AT Machined Contacts Receptacle Square Flange Thermoplastic Grommet seal Neoprene Rubber: 3 and 5 pin Silicone Rubber: 9 pin Contact (AT Series) Copper Alloy (Nickel and Gold plating available) Dielectric Withstanding Voltage (Test Voltage) Current leakage less than 2 milliamps at 1500 VAC Current Rating at 125ºC 13A Contact Millivolt Drop 60 (AWG 16 Wire, 13A) Insulation Resistance 1000 megaohms min. at 25ºC Mechanical Specifications Operating Temperature Range -55ºC to +125ºC Durability(Mating Cycle) No electrical or mechanical defects after 100 cycles of engagement or disenagement Corrosion Resistance Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL STD 1344 method 1001 Moisture Resistance Water does not penetrate seals when submerged in 3 feet of water Fluid Resistance Connectors show no damage when exposed to most fluids used in industrial applications Thermal Shock -40º/+125ºC, 100 cycles, 1 hour per cycle Crimp Tensile Strength 25 lbs Vibration Maintains continuity and exhibits no mechanical or physical damage during or while subject to sinusoidal vibration, having an amplitude of .060 inches double amplitude and the frequency varied linearly between limits of 10 to 2000 to 10 Hz with a maximum force of 20g’s. No electrical discontinuities longer than 1 microsecond Physical Shock No unlocking, unmating or other unsatisfactory result during or after 50g’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL STD 202, Method 213, Condition “C“ How to Order Contact and Accesories Part Number Description ATC10- RC3C Cap with lanyard for size 3 square flange receptacle ATC10- RC3 Cap less lanyard for size 3 receptacle ATC10- RC5C Cap with lanyard for size 5 square flange receptacle ATC10- RC5 Cap less lanyard for size 5 receptacle ATC10- RC9C Cap with lanyard for size 9 square flange receptacle ATC10- RC9 Cap less lanyard for size 9 receptacle ATC10- RC9L Cap with lanyard for size 9 jam nut receptacle ALHN-19 Hex nut for ATC-17-9-1939PN ASR9-1939 Strain relief for small flange J1939 receptacle AWS9-1939 Wave spring for small flange J1939 receptacle PN Description AT0-202-16141 Machined size 16 Pin Contact, nickel plating AT2-201-16141 Machined size 16 Socket Contact, nickel plating AT0-202-1631 Machined size 16 Socket Contact, gold plating AT2-201-1631 Machined size 16 Socket Contact, gold plating How to Order Contact and Accesories 1 2 3 4 5 ATC 10 9-1939 P N Product Line Shell Style Arrangements Contracts Wire Size 3-16, 5-16, 9-1939 P for Pin Only for Receptacle N for ø0.0 51 inch S for Socket Only for Plug E for ø 0.0 35 inch 09 Small Flange Jam Nut Receptacle (includes jam nut) 10 Square Flange Receptacle 11 Round Nut Receptacle 16 (for Arrangements 3-16 & 5-16 only) 17 Jam Nut Receptacle (exclude jam nut) Required Tools: Crimp Tool: DMC AF8 M22520/1-01 Contact Insertion/Removal Tool: Amphenol C10-731509-161 For further information on your individual application requirements, contact: Amphenol Corporation North America: Amphenol Industrial Operations 180 N. Freeport Drive, Plant 4 Nogales, AZ 85621 Tel: (888) 364-9011 Fax: (520) 285-5134 Europe: Amphenol Industrial Operations Europe Via Barbaiana 5 1-20020 Lainate (MI) Italy Tel: +39 02 93254.204 Fax: +39 02 93254.444 Middle East: Amphenol Middle East Enterprises FZE Office C-37 PO Box 21107 Ajman Free Zone, UAE Tel: +9 716-7422494 Fax: +9 716-7422941 Asia: Amphenol Technology (Zhuhai) Co., Ltd. No. 63 Xing Han Road, San Zao Town Jin Wan District, Zhuhai City, China 519040 Tel: +86 756-3989760 Fax: +86 756-3989768 Email: tech@amphenol-aio.com Email: info@amphenol-aio.com Email: jhussain@amphenol-industrial.com Email: enquiry@amphenol-aio.com