ATHD04-1-12P-10G-M4

LENGTH TABLE PART NUMBER LENGTH (METERS) ATHD04-1-12P-10G-M1 1 (3.28FT) ATHD04-1-12P-10G-M2 2 (6.56FT) ATHD04-1-12P-10G-M4 4 (13.12FT) ATHD04-1-12P-10G-M5 5 (16.40FT) ATHD04-1-12P-10G-M10 10 (32.80FT) PLEASE CONTACT CSR FOR ADDITONAL AVAILABLE OPTIONS BEFORE OVERMOLD NOTES: UNLESS OTHERWISE SPECIFIED 1. 4. MATERIAL: HOUSING: PA66 SEAL: SILICONE RUBBER 2. MODIFICATIONS: OVERMOLDED (PA) 3. CONNECTOR SPECIFICATIONS: 3.1 CURRENT RATING: 40AMPS 3.2 CABLE ASSEMBLY OPERATING TEMPERATURE: -40 TO +100C 3.3 CONTACT: COPPER ALLOY, NICKEL PLATED 3.4 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.5 INSULATION RESISTANCE: 1000 MEGAOHMS MIN @ 25C 3.6 MOISTURE RESISTANCE: IP68 MATED CONDITION (1M OF WATER FOR 24 HOURS). 3.7 MATING CYCLE DURABILITY: 100 CYCLES 3.8 RoHS COMPLIANT 5. 6. 7. WIRE SPECIFICATIONS: COMPONENTS: 10AWG, PVC INSULATED CONDUCTOR 105/30 STRANDS BARE COPPER. INSULATION: PVC, BLACK 600V AC/DC APPROVALS: UL TYPE AWM, STYLE 1015. CSA TYPE TEW. OIL RESISTANT I SUN RESISTANT I FT1 FLAME RATING ROHS COMPLIANT. MATING PART: ATHD06-1-12S PLUG. MATING CABLE ASSEMBLY: ATHD06-1-12S-10G-Mx ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. AFTER OVERMOLD DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: RO WS RO WS ITEM Amphenol DATE 2/25/2022 3/22/2022 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 3/25/2022 1 POS RECEPT SZ 12 MOLDED, PIN SIZE 12, 10AWG, SINGLE-ENDED WIRED ASSY, AMPHENOL ATHD CONNECTOR ATHD04-1-12P, X METERS THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: REVISION C C- ATHD04-1-12P-10G-Mx A1 NEXT ASS'Y: NONE ATHD04-1-12P-10G-Mx SHEET 1 OF 1