ATHD04-1-8P-PM05

REVISIONS REV ECO DESCRIPTION DATE BY APPR A1 - RELEASED DRAWING 10DEC21 VITO TOMMY 51.5 52.5±0.5 36.0 10.6 Ø20.3 TITLE: 25.5 WIRE 6 SEAL 23.9 35.2 NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL: HOUSING, RETAINER: THERMOPLASTIC; COLOR: BLACK RING SEAL, WIRE SEAL, GASKET: SILICONE RUBBER; COLOR: RED RETAINER HOUSING GASKET M5 X 0.8, DEEP 8.0 (2X) THREADED INSERT 2. MODIFICAIONS: FRONT FLANGE MOUNT; THREADED INSERT RECOMMENDED TORQUE : 1.9 - 2.2 N.M 36.00 11.60 2x R2.00 Ø21.32 2x R0.20 2x Ø5.80 14.24 REV: SH: 1.79 OF: 4. MATING PART: ATHD06-1-8S* PLUG ( * = MODIFICATIONS ) 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. ATHD04-1-8P-PM05 PART NUMBER RECOMMENDED PANEL CUTOUT DESCRIPTION QUANTITY 6. CONTACT SIZE AND REAR SEAL WIRE RANGE: DRAWN: CHECKED: TYPICAL CONTACT MIN. INSUL MAX. INSUL WIRE RANGE O.D. O.D. SIZE 8 - 10 AWG 6.09 mm 4.83 mm 08 (8.0-5.0 mm²) (.240 in) (.190 in) DWG NO: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 60 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP68(IM OF WATER FOR A PERIOD OF 24 HOURS,MATED CONDITION); IP69K (MATED CONDITION) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT RING SEAL X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: 1 POS, RECEPTACLE, PIN, SIZE 8, ATHD SERIES, FLANGE MOUNT, THREADED INSERT THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: A1 SHEET 1 OF 1 A Series™ - Contact Size 8 Options (Works with: ATHD and DuraMate Series) Machined Contacts, Pins and Sockets Part Number Description Size AWG Type Amps AT60-204-08141 Male Contact - Pin, Copper Alloy, Nickel-Plated 8 8-10 Machined 60A AT62-203-08141 Female Contact - Socket, Copper Alloy, Nickel-Plated 8 8-10 Machined 60A AT60-204-08141-16 Male Contact - Pin, Copper Alloy, Nickel-Plated 8 6 Machined 60A AT62-203-08141-16 Female Contact - Socket, Copper Alloy, Nickel-Plated 8 6 Machined 60A Tooling - Machined Contacts Part Number WA23 Description Heavy Duty Pneumatic Crimp Tool -Uses Universal Positioner Part No. WA23-101DA and Crimp Locator MFX-3961 WA23-2 Die Assembly -for CA-5E12 Heavy Duty Pneumatic Crimp Tool, Size 8 WA23-3 Die Assembly -for CA-5E12 Heavy Duty Pneumatic Crimp Tool, Size 6 WA23-10 Contact Locator, Size 6 and Size 8 96-978-22 Crimper and Dies -for Size 10mm²-185mm² Wires AT114008 Contact Removal Tool, Plastic, Size 8, 8-10AWG Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 08/2023