ATHP042P08EL16-M1

REVISIONS REV ECO A1 DESCRIPTION RELEASE NEW DRAWING DATE BY APPR Dec.12.18 Blink Tommy 66.0 200±5 54.0 NOTES: UNLESS OTHERWISE SPECIFIED 62.8 52.0 69.7 6. 2 4-Ø 52.0 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 25.7±0.1 21.2 3. SIGNAL CONTACT: RT SERIES 16# PIN CONTACT POWER CONTACT: SC000384-8-M1 Wiring Diagram A) UL 3266 18AWG BLACK SH: B) UL 3266 18AWG RED REV: 54.0 R4 .0 4xM6 DWG NO: 2. SPECIFICATIONS: 2.1 CURRENT RATING: 180 AMPS 2.2 VOLTAGE RATING: 1000 V AC/DC 2.3 CONTACT RESISTANCE: 0.3 mΩ@POWER CONTACT 2.4 OPERATING TEMPERATURE: -40°C TO +130°C 2.5 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 3000 VOLTS AC. 2.6 INSULATION RESISTANCE: 500 MEGOHMS MIN@25°C. 2.7 DEGREE OF PROTECTION: IP67 (MATED CONDITION) 2.8 MATING CYCLE DURABILITY: 100 CYCLES 2.9 RoHS COMPLIANT 2-M8x1.25 60.7 1. MATERIAL: 1.1 HOUSING: THERMOPLASTIC UL 94V0 1.2 SEAL: SILICONE RUBBER 1.3 POWER CONTACT: COPPER ALLOY, SILVER PLATED 1.4 SHIELDING: COPPER ALLOY, TIN PLATED TITLE: 2-15.5 2-13.0 OF: 26.5 DESCRIPTION PART NUMBER RECOMMEND PANEL CUT QUANTITY DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: ATHP, RECEPTACLE,2 PIN,8MM FLANG MOUNTING WITH EMC SHIELDING THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE A1 SHEET 1 OF 1 MagnaMate™ ATHP Standard - Contact Options Power Contacts - Machined Contacts, Sockets & Pins Part Number Description SC000383-8 SC000384-8 SC000445-8 SC000384-8-M1 Control Contacts - Crimp Contacts, Stamped & Formed Size AWG Type Amps Female Contact - Socket, Gold-plated 8mm 50mm2 Machined 180A Male Contact - Pin, Nickel-plated 8mm 50mm2 Machined 180A Female Contact - Socket, Nickel-plated Male Contact - Pin, Gold-plated 8mm 8mm 50mm2 50mm2 Machined Machined Tooling - Machined Contacts Part Part Number WA23 WA23-8 Description Heavy Duty Pneumatic Crimp Tool -Uses Universal Positioner Part No. WA23-101DA and Crimp Locator MFX-3961 Die Assembly -for WA23 Heavy Duty Pneumatic Crimp Tool Part Number AWG Wire Range (mm²) Plating SS14M2F 14 2.0-2.5 Gold Flash 180A SS14M2G5 14 2.0-2.5 Gold 5µ” 180A SS14M2G10 14 2.0-2.5 Gold 10µ” SS14M2G15 14 2.0-2.5 Gold 15µ” SS14M2G30 14 2.0-2.5 Gold 30µ” Gold Flash Male SP16M2F 18-16 0.75-1.50 SP16M2G5 18-16 0.75-1.50 Gold 5µ” SP16M2G10 18-16 0.75-1.50 Gold 10µ” SP16M2G15 18-16 0.75-1.50 Gold 15µ” SP16M2G30 18-16 0.75-1.50 Gold 30µ” Tooling, Stamped & Formed Part Number QXRT16 WA23-10 Contact Locator, Size 50mm 96-978-22 Crimper and Dies -for Size 10mm²-185mm² Wires QXATHP-50 Female Description Contact Extraction Tool, #16 (Ø 1.6) Contact MFX-3954 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3957 Crimp Die for Stamped & Formed Contact Contact Extraction Tool 50mm2 Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 04/2022