ATM04-08PC-SR1GN

REVISIONS REV ECO DESCRIPTION DATE BY APPR 01 - PERLIMINARY DESIGN 03/NOV/14 ORION - 02 - UPDATED P/N COLORS 02/MAR/15 JAH - 03 - DIM 53.4 WAS 43.7 (TYPO) 07/SEP/16 JAH - TITLE: RECEPTACLE, KEYED, 8 PIN, STRAIN RELIEF, ATM SERIES REQUIRES CONTACT RETENTION WEDGE AWM-8P 31.8 1 KEYWAY (3) PLACES 20.2 DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED ATM04-08PX-SR1XX 1 SEE SHEET 2 FOR KEY ARRANGEMENTS AND COLORS. 7 2. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 3. MODIFICATIONS: STRAIN RELIEF END CAP SH: 1 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. TYPICAL WIRE RANGE 20 1.35 mm (.053 in) 3.05 mm (.120 in) 16 - 22 AWG X SIGNATURES DRAWN: ORION.LI ITEM Amphenol DATE 03/NOV/14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: RECEPTACLE, KEYED, 8 PIN, STRAIN RELIEF ATM SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: REVISION B C- ATM04-08PX-SR1XX 03 NEXT ASS'Y: NONE SHEET 1 OF 2 2 UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 3) Note reference = 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: SEE SHEET 2 DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY 53.4 OF: 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 03 5. MATING PART: ATM06-08SX* PLUG. ( X = A,B,C,D KEYS; * = MODIFICATIONS AND COLORS ) REV: 4. SPECIFICATIONS: 4.1 CURRENT RATING: 7.5 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C. 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT REVISIONS REV P/N ATM04-08PA-SR1GY KEY-A CONFIGURATION STANDARD COLOR: GREY P/N ATM04-08PB-SR1BK KEY-B CONFIGURATION STANDARD COLOR: BLACK ECO DESCRIPTION DATE BY APPR P/N ATM04-08PD-SR1BN KEY-D CONFIGURATION STANDARD COLOR: BROWN P/N ATM04-08PC-SR1GN KEY-C CONFIGURATION STANDARD COLOR: GREEN TITLE: KEYWAY (3) PLACES KEYWAY (3) PLACES RECEPTACLE, KEYED, 8 PIN, STRAIN RELIEF, ATM SERIES KEYWAY (3) PLACES KEYWAY (3) PLACES DWG NO: KEY-B CONFIGURATION COLOR PART NUMBER KEY-C CONFIGURATION COLOR KEY-D CONFIGURATION PART NUMBER COLOR PART NUMBER ATM04-08PB-SR1GY GREY ATM04-08PC-SR1GY GREY ATM04-08PD-SR1GY ATM04-08PB-SR1BK BLACK ATM04-08PC-SR1BK BLACK ATM04-08PD-SR1BK GREEN ATM04-08PA-SR1GN * BLACK GREEN ATM04-08PB-SR1GN GREEN ATM04-08PC-SR1GN GREEN ATM04-08PD-SR1GN BROWN ATM04-08PA-SR1BN BROWN ATM04-08PB-SR1BN ATM04-08PC-SR1BN BROWN ATM04-08PD-SR1BN DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: ORION.LI Amphenol DATE 03/NOV/14 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: OTHER COLORS SHOWN ARE AVAILABLE VIA SPECIAL ORDER. ITEM MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: RECEPTACLE, KEYED, 8 PIN, STRAIN RELIEF ATM SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: REVISION B C- ATM04-08PX-SR1XX 03 NEXT ASS'Y: NONE SHEET 2 OF 2 2 AN ASTERISKS ( * ) PLACED BEFORE THE COLOR DENOTES THE STANDARD MOLDED COLOR OF THE CONNECTORS SHOWN ABOVE. * OF: NOTE: * BROWN 2 GREY ATM04-08PA-SR1BK SH: ATM04-08PA-SR1GY 03 GREY * BLACK REV: PART NUMBER ATM04-08PX-XXX KEY-A CONFIGURATION COLOR ATM Series™ - Contact Size 20 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-010-2031 Male Contact - Pin, Gold-plated 20 16-18 Machined AT60-20-0144 Male Contact - Pin, Gold-plated 20 16-22 Stamped & Formed AT62-005-20141 Female Contact - Socket, Gold-plated 20 16-18 Machined AT62-20-0144 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-010-20141 Male Contact - Pin, Nickel-plated 20 16-18 Machined AT60-20-0244 Male Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT62-005-2031 Female Contact - Socket, Nickel-plated 20 16-18 Machined AT62-20-0244 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-202-2031 Male Contact - Pin, Gold-plated 20 20-22 Machined AT60-20-0122 Male Contact - Pin, Nickel-plated 20 16-22 Stamped & Formed Part Number Description AT62-201-2031 Female Contact - Socket, Gold-plated 20 20-22 Machined AT62-20-0122 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-202-20141 Male Contact - Pin, Nickel-plated 20 20-22 Machined AT60-20-0222 Male Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT62-201-20141 Female Contact - Socket, Nickel-plated 20 20-22 Machined AT62-20-0222 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-20-0277 Male Contact - Socket, Tin-plated 20 16-22 Stamped & Formed AT62-20-0277 Female Contact - Socket, Tin-plated 20 16-22 Stamped & Formed AT60-20-0422 Male Contact - Socket, Nickel-plated 20 20-22 Stamped & Formed AT62-20-0444 Female Contact - Socket, Gold-plated 20 20-22 Stamped & Formed Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Part Number Description MFX-3974 Crimp Die - Size 20 (S&F contacts only) MFX-3976 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -04XX Series MFX-3978 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -02XX Series ATT-20-00 Hand Crimp Tool - Size 20, 20AWG (S&F contacts only) Contact Removal Tools Part Part Number ATRT-100 Description Used for removal of contacts for A Series™ products AT11-240-2005 Contact Removal Tool, Plastic, Size 20 AT13-204-2005 Sealing Plug, Size 20, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021