ATM04-2P

REVISIONS REV ECO A3 - DESCRIPTION RELEASE NEW DWG FORMAT DATE BY APPR 18/JUN/13 DRP - 16.6 TITLE: 6 RECEPTACLE, 2 PIN, ATM SERIES 16.2 REQUIRES CONTACT RETENTION WEDGE AWM-2P DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED ATM04-2P-XXX 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 2. MODIFICATIONS: N/A 41.2 1 SEE PART NUMBER CHART DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST BLACK ATM04-2P-BLK 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. BLUE ATM04-2P-BLU BROWN ATM04-2P-BRN 3) Note reference = GREEN ATM04-2P-GRN MATERIAL SPECIFICATIONS: RED ATM04-2P-RED WHITE ATM04-2P-WHT YELLOW ATM04-2P-YEL UNLESS OTHERWISE SPECIFIED MAX. INSUL O.D. 20 1.35 mm (.053 in) 3.05 mm (.120 in) TYPICAL WIRE RANGE 16 - 22 AWG 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 X SIGNATURES DRAWN: D.PARKS ITEM Amphenol DATE 18/JUN/13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: CUSTOMER: RECEPTACLE, 2 PIN, ATM SERIES PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION ATM04-2P-XXX SHEET A3 1 OF 1 1 PART NUMBER OF: COLOR ATM04-2P MIN. INSUL O.D. SH: PART NUMBER CHART GREY CONTACT SIZE A3 STANDARD MOLDED COLOR IS GREY. ADDITIONAL COLORS SHOWN IN PART NUMBER CHART ARE AVAILABLE VIA SPECIAL ORDER. 4. MATING PART: ATM06-2S* PLUG ( * = MODIFICATIONS AND COLORS ) 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: REV: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 7.5 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT ATM Series™ - Contact Size 20 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type AT60-010-2031 Male Contact - Pin, Gold-plated 20 16-18 Machined AT60-20-0144 Male Contact - Pin, Gold-plated 20 16-22 Stamped & Formed AT62-005-20141 Female Contact - Socket, Gold-plated 20 16-18 Machined AT62-20-0144 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-010-20141 Male Contact - Pin, Nickel-plated 20 16-18 Machined AT60-20-0244 Male Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT62-005-2031 Female Contact - Socket, Nickel-plated 20 16-18 Machined AT62-20-0244 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-202-2031 Male Contact - Pin, Gold-plated 20 20-22 Machined AT60-20-0122 Male Contact - Pin, Nickel-plated 20 16-22 Stamped & Formed AT62-201-2031 Female Contact - Socket, Gold-plated 20 20-22 Machined AT62-20-0122 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-202-20141 Male Contact - Pin, Nickel-plated 20 20-22 Machined AT60-20-0222 Male Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed Machined AT62-20-0222 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-20-0277 Male Contact - Socket, Tin-plated 20 16-22 Stamped & Formed AT62-20-0277 Female Contact - Socket, Tin-plated 20 16-22 Stamped & Formed AT60-20-0422 Male Contact - Socket, Nickel-plated 20 20-22 Stamped & Formed AT62-20-0444 Female Contact - Socket, Gold-plated 20 20-22 Stamped & Formed Part Number AT62-201-20141 Description Female Contact - Socket, Nickel-plated Size AWG Type Part Number Description 20 20-22 Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-240-2005 Part Number Description MFX-3974 Crimp Die - Size 20 (S&F contacts only) MFX-3976 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -04XX Series MFX-3978 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -02XX Series ATT-20-00 Hand Crimp Tool - Size 20, 20AWG (S&F contacts only) Description Used for removal of contacts for A Series™ products Contact Removal Tool, Plastic, Size 20 Sealing Plugs Part Part Number AT13-204-2005 Description Sealing Plug, Size 20, White AT13-204-2005-SR Sealing Plug, Size 20, SR01 Series, Black ATM13-217-2005 Locking Sealing Plug, Size 20, Grey ATM13-217-2005-SR Locking Sealing Plug, Size 20, SR01 Series, Blue Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 03/2022