ATM06-2S-RB120BK

REVISIONS REV ECO A1 - RELEASE NEW DWG FORMAT 18APR19 BROOK TOMMY A2 - REVISED NOTE #5 28JUN22 JHEAD 29.20 DESCRIPTION DATE BY APPR DH WIRING DIAGRAM TITLE: 120 OHMS 1/4 WATT 5% PLUG, B KEY,2 CONTACTS,RESISTOR,ATM,BLACK FACE VIEW CONTACT AT62-201-2031 2X SOLID REAR SEAL 12.80 DWG NO: LOCKING WEDGE AWM-2SB 1. MATERIAL: HOUSING: THERMOPLASTIC;BLACK SEAL: SILICONE RUBBER ATM06-2S-RB120BK NOTES: UNLESS OTHERWISE SPECIFIED BLACK END CAP AND CONNECTOR BODY REV: 14.40 1 UNLESS OTHERWISE SPECIFIED All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: 18APR19 18APR19 TOMMY 18APR19 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: 5. MATING PART: ATM04-2P* RECEPTACLE WITH AWM-2PB WEDGE INSTALLED. ( * = MODIFICATIONS AND COLORS ) Amphenol DATE BROOK DING ORION LI ITEM PLUG,B KEY,2 CONTACTS,RESISTOR,ATM BLACK THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: REVISION B C- ATM06-2S-RB120BK A2 6. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. NEXT ASS'Y: NONE SHEET 1 OF 1 1 REF: DTM06-2S-EP10 ATM06-2S-RB120BK DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY 1) 2) 1 2 3 OF: 4. RESISTOR SPECIFICATIONS:120 OHMS. SH: 3. CONNECTOR SPECIFICATIONS: 3.1 CURRENT RATING: 7.5 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT A2 2. MODIFICATIONS: RESISTOR