ATM06-2S-SR01GY

REVISIONS 37.3 REV ECO DESCRIPTION DATE BY A1 - RELEASE NEW DWG FORMAT 18/AUG/14 JARRY APPR - A2 - P/N BN WAS BR, GN WAS GR 02/MAR/15 JAH - A3 - ADD COLOR 21/JUL/20 LOUIE TOMMY A4 - UPDATE COLOR OPTION 6/NOV/20 LOUIE TOMMY TITLE: PLUG, 2 SOCKET, STRAIN RELIEF END CAP, ATM SERIES REQUIRES CONTACT RETENTION WEDGE AWM-2S 6 16.2 STRAIN RELIEF END CAP DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED ATM06-2S-SR01XX 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 14.4 2. MODIFICATIONS: STRAIN RELIEF END CAP 1.35 mm (.053 in) 3.05 mm (.120 in) 16 - 22 AWG GREY ATM06-2S-SR01GY BLACK ATM06-2S-SR01BK BLUE ATM06-2S-SR01BL BROWN ATM06-2S-SR01BN GREEN ATM06-2S-SR01GN RED ATM06-2S-SR01RD WHITE ATM06-2S-SR01WT YELLOW ATM06-2S-SR01YL ORANGE ATM06-2S-SR01OR SEE PART NUMBER CHART DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: Amphenol DATE LOUIE ORION 6/NOV/20 9/NOV/20 TOMMY 10/NOV/20 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. PLUG, 2 SOCKET, ATM SERIES STRAIN RELIEF, END CAP TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION ATM06-2S-SR01XX SHEET 1 A4 OF 1 1 20 PART NUMBER OF: CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE 1 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: SH: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. STANDARD MOLDED COLOR IS GREY. ADDITIONAL COLORS SHOWN IN PART NUMBER CHART ARE AVAILABLE VIA SPECIAL ORDER. PART NUMBER CHART COLOR A4 4. MATING PART: ATM04-2P* RECEPTACLE. ( * = MODIFICATIONS AND/OR COLORS ) REV: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 7.5 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT ATM Series™ - Contact Size 20 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type AT60-010-2031 Male Contact - Pin, Gold-plated 20 16-18 Machined AT60-20-0144 Male Contact - Pin, Gold-plated 20 16-22 Stamped & Formed AT62-005-20141 Female Contact - Socket, Gold-plated 20 16-18 Machined AT62-20-0144 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-010-20141 Male Contact - Pin, Nickel-plated 20 16-18 Machined AT60-20-0244 Male Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT62-005-2031 Female Contact - Socket, Nickel-plated 20 16-18 Machined AT62-20-0244 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-202-2031 Male Contact - Pin, Gold-plated 20 20-22 Machined AT60-20-0122 Male Contact - Pin, Nickel-plated 20 16-22 Stamped & Formed AT62-201-2031 Female Contact - Socket, Gold-plated 20 20-22 Machined AT62-20-0122 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-202-20141 Male Contact - Pin, Nickel-plated 20 20-22 Machined AT60-20-0222 Male Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed Machined AT62-20-0222 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-20-0277 Male Contact - Socket, Tin-plated 20 16-22 Stamped & Formed AT62-20-0277 Female Contact - Socket, Tin-plated 20 16-22 Stamped & Formed AT60-20-0422 Male Contact - Socket, Nickel-plated 20 20-22 Stamped & Formed AT62-20-0444 Female Contact - Socket, Gold-plated 20 20-22 Stamped & Formed Part Number AT62-201-20141 Description Female Contact - Socket, Nickel-plated Size AWG Type Part Number Description 20 20-22 Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-240-2005 Part Number Description MFX-3974 Crimp Die - Size 20 (S&F contacts only) MFX-3976 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -04XX Series MFX-3978 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -02XX Series ATT-20-00 Hand Crimp Tool - Size 20, 20AWG (S&F contacts only) Description Used for removal of contacts for A Series™ products Contact Removal Tool, Plastic, Size 20 Sealing Plugs Part Part Number AT13-204-2005 Description Sealing Plug, Size 20, White AT13-204-2005-SR Sealing Plug, Size 20, SR01 Series, Black ATM13-217-2005 Locking Sealing Plug, Size 20, Grey ATM13-217-2005-SR Locking Sealing Plug, Size 20, SR01 Series, Blue Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 03/2022