ATM13-12PA-R008

REVISIONS REV ECO A1 - A2 - 70.0±0.4 A3 2x 9.5 DESCRIPTION DATE RELEASE NEW DRAWING BY APPR 08JUN19 SULLEN TOMMY UPDATE DRAWING 29JUL19 SULLEN TOMMY UPDATED SPACE LIMIT DIMENSION 15JAN20 SULLEN TOMMY 2x 7.4 2x 3.3 2x 5.0 TITLE: 2x 18.2 21.2 15.7 101.0±0.5 HEADER SEAL 35.0±0.4 DWG NO: KEY A GREY 3.05±0.4 Ø1.0±0.05 4.2 2.0 6.4 2x 5.3 6 7 1 12 SH: 1. MATERIAL: HOUSING: THERMOPLASTIC, BLACK SEAL: SILICONE RUBBER CONTACT: COPPER ALLOY 12.9 REV: NOTES: UNLESS OTHERWISE SPECIFIED 2.9 SEE SHEET 2 PART NUMBER 5. THIS RECEPTACLE IS USED WITH AIPXE-325X4A-XXXX AND AIPXE-325X4B-XXXX ENCLOSURE (XXXX= ALL MODIFICATIONS) DESCRIPTION QUANTITY DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: 6. SEE SHEET 2 FOR OTHER KEY ARRANGEMENTS AND COLORS 4. MATING PART: ATM06-12SX-* ( X = A,B,C,D KEYS ; * = ALL MODIFICATIONS) OF: 2. MODIFICATIONS: RA PCB MOUNT 3. SPECIFICATIONS: 3.1 CURRENT RATING: 7.5 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.5 MOISTURE RESISTANCE: IP69K ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT 7. MAXIMUM COMPONENT HEIGHT DEPENDS ON LOCATION DUE TO PART DRAFT AND RIBS.(SEE SHEET 3) MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: ARMOR IPX RECEPTACLE ATM HEADER, 12 POSITIONS,SIZE 20 CONTACT THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B 8. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY NEXT ASS'Y: NONE SHEET 1 OF 3 REVISIONS 3X KEYWAY SELEEVE RETAINER：GREY REV ECO A1 - A2 - A3 - DESCRIPTION DATE RELEASE NEW DRAWING BY APPR 08JUN19 SULLEN TOMMY UPDATE DRAWING 29JUL19 SULLEN TOMMY UPDATED SPACE LIMIT DIMENSION 15JAN20 SULLEN TOMMY 3X KEYWAY SELEEVE RETAINER：BLACK TITLE: CONTACT PLATING PART NUMBER REFERENCE CONTACT PLATING PART NUMBER REFERENCE GOLD ATM13-12PA-GR01 DTM13-12PA-GR01 GOLD ATM13-12PB-GR01 DTM13-12PB-GR01 TIN ATM13-12PA-R008 DTM13-12PA-R008 TIN ATM13-12PB-R008 DTM13-12PB-R008 3X KEYWAY SELEEVE RETAINER：BROWN REFERENCE CONTACT PLATING PART NUMBER REFERENCE GOLD ATM13-12PC-GR01 DTM13-12PC-GR01 GOLD ATM13-12PD-GR01 DTM13-12PD-GR01 TIN ATM13-12PC-R008 DTM13-12PC-R008 TIN ATM13-12PD-R008 DTM13-12PD-R008 SH: PART NUMBER REV: CONTACT PLATING DWG NO: 3X KEYWAY SELEEVE RETAINER：GREEN OF: ATM13-12PX-XXXX PART NUMBER DESCRIPTION QUANTITY DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: ARMOR IPX RECEPTACLE ATM HEADER, 12 POSITIONS,SIZE 20 CONTACT THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE SHEET 2 OF 3 REVISIONS CIRCUIT BOARD HOLE LOCATIONS AND KEEP CLEAR AREAS FOR ATM13-12PX-R008 ATM13-12PX-GR01 ALL DIMENSIONS REFERENCE TOP VIEW BOTTOM SIDE ONLY REV ECO A1 - A2 - A3 - DESCRIPTION DATE RELEASE NEW DRAWING BY APPR 08JUN19 SULLEN TOMMY UPDATE DRAWING 29JUL19 SULLEN TOMMY UPDATED SPACE LIMIT DIMENSION 15JAN20 SULLEN TOMMY 82.55 A #4 [M3] SCREW LOCATION OPTIONAL 4.00 2.00 HEADER 10.00 3.00 TITLE: PCB KEEP CLEAR 101.60 2x Ø3.00+0.2 0 FOR #4 [M3] SCREW Ø1.2+0.2 0 12x HOLE FOR Ø1.04 PIN 2x 35.00 (133) TOP SURFACE OF PCB REF ENCLOSURE 2.10 6.35 B B 12.00 2x 9.00 12.60 16.80 21.00 30.00 DWG NO: 4.20 8.40 2x 4.41 2.45 2x 12.00 60.00 22.00 A SECTION A-A 2x4.00 11.00 7 (19.2) 7 (17.6) REV: 44.00 ASSEMBLED PCB ENCLOSURE SHOWN FOR REFERENCE SH: 84.60 SECTION B-B OF: SEE SHEET 2 PART NUMBER 7.00 DESCRIPTION QUANTITY DRAWN: 17.00 19.00 CHECKED: X 14.00 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: THREE DIMENSIONAL SPACE LIMIT APPROXIMATE INTERNAL SPACE FOR COMPONENT SPACE LAYOUT MAX. COMPONENT HEIGHT UNDER BOARD 2.00 mm. 3D VIEW AIPXE-325X4A-XXXX AND AIPXE-325X4B-XXXX ENCLOSURE AND MOUNTING HARDWARE SHOWN FOR REFERENCE PROCESS SPECIFICATIONS: ARMOR IPX RECEPTACLE ATM HEADER, 12 POSITIONS,SIZE 20 CONTACT THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE SHEET 3 OF 3