ATM15-2P-BM03

REVISIONS ECO A1 - A2 - DESCRIPTION DATE RELEASE NEW DRAWING A3 36.8 BY 15JUN18 APPR SULLEN TOMMY REVISED DRAWING 10JUL20 JHEAD ADD DIMENSIONING FOR PCB LAYOUT 15NOV23 HAILEY TOMMY DH 4x Ø2.79 x 13.25 DP 25.8 2x Ø3.10 x 10.2 DP REV 30.2 16.6 17.3 TITLE: RECOMMENDED SCREW: 6-19 [M3.63 x 1.34] THREAD-FORMING SCREW, TORQUE: 10-20 IN-LB [1.13-2.25 NM] RECOMMENDED SCREW: 4-20 [M3.12 x 1.27] THREAD-FORMING SCREW, TORQUE: 10-20 IN-LB [0.68-1.13 NM] 27.0 16.2 15.8 4x R7.6 3.05±0.4 FLANGE SEAL PIN #1 RESERVOIR 4.20 18.0 36.82 MIN. 25.79±0.10 18.02±0.1 17.60 2x Ø1.0±0.12 6.91±0.1 4x R7.60 MIN. 8.35±0.1 2x Ø4.06 4.10 6x R0.80 15.75±0.1 NOTES: UNLESS OTHERWISE SPECIFIED 13.00 1. MATERIAL: HOUSING: THERMOPLASTIC, GREY SEAL: SILICONE RUBBER CONTACT: COPPER ALLOY Ø3.43 (4x) INTERNAL SEALING SURFACE FINISH TO BE 3.2 OR BETTER 0.13 2x R4.00 RECOMMENDED PANEL CUTOUT 4.20±0.05 RECOMMENDED PCB LAYOUT VIEW FROM COMPONENTS SIDE OF PCB ATM15-2P-BMXX QUANTITY DESCRIPTION PART NUMBER ATM15-2P-BMXX VARIANTS CONTACT POTTING OR NOT PLATING IN RESERVOIR DRAWN: PART NUMBER CHECKED: GOLD NO POTTING ATM15-2P-BM01 X GOLD POTTING ATM15-2P-BM02 MATERIAL SPECIFICATIONS: TIN NO POTTING ATM15-2P-BM03 TIN POTTING ATM15-2P-BM04 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: CUSTOMER: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY OF: 4. MATING PART: ATM06-2S* (* = ALL MODIFICATIONS) Ø1.20+0.2 (2x) 0 SH: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 7.5 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT 13.5 13.00 8.58 17.15 26.95 MIN. REV: 2. MODIFICATIONS: FLANGE; STRAIGHT PCB MOUNT DWG NO: 14.00 PROCESS SPECIFICATIONS: BOARDLOCK PCB MOUNT RECEPTACLE, 2 PIN, STRAIGHT FLANGE, ATM SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B 6. POTTED CONNECTORS SPECIFIED FOR UP TO 5 P.S.I. APPLICATIONS. NEXT ASS'Y: NONE A3 SHEET 1 OF 1