ATM15-6P-BM03

REVISIONS REV ECO A1 - RELEASE NEW DRAWING 15JUN18 A2 - REVISED DRAWING 10JUL20 44.9 DATE BY APPR SULLEN TOMMY JHEAD DH 4x Ø2.79 x 13.25 DP 33.4 2x Ø3.10 x 10.2 DP DESCRIPTION RECOMMENDED SCREW: 4-20 [M3.12 x 1.27] THREAD-FORMING SCREW, TORQUE: 6-10 IN-LB [0.68-1.13 NM] 30.2 21.7 17.3 TITLE: RECOMMENDED SCREW: 6-19 [M3.63 x 1.34] THREAD-FORMING SCREW, TORQUE: 10-20 IN-LB [1.13-2.25 NM] 19.2 21.9 7.1 4x R7.6 PIN #1 RESERVOIR 3.05±0.4 FLANGE SEAL PCB MOUNT RECEPTACLE, 6PIN, STRAIGHT FLANGE, ATM SERIES 33.1 4.2 8.4 22.2 44.86 MIN. 22.22±0.1 33.43±0.10 6.91±0.1 25.18 4x R7.60 MIN. 2x Ø4.06 7.40±0.1 7.10±0.1 14.00 20.47 33.10 MIN. Ø1.20+0.2 (6x) 0 INTERNAL SEALING SURFACE FINISH TO BE 3.2 OR BETTER 0.13 1 OF: ATM15-6P-BMXX ATM15-6P-BMXX VARIANTS DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED CONTACT POTTING OR NOT PLATING IN RESERVOIR GOLD NO POTTING PART NUMBER ATM15-6P-BM01 GOLD POTTING ATM15-6P-BM02 TIN NO POTTING ATM15-6P-BM03 TIN POTTING ATM15-6P-BM04 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: CHECKED: APPROVAL: CUSTOMER: PROCESS SPECIFICATIONS: Amphenol DATE SULLEN.ZHANG 15JUN18 ORION.LI 15JUN18 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: MATERIAL SPECIFICATIONS: TOMMY.XIE 15JUN18 BOARDLOCK PCB MOUNT RECEPTACLE, 6 PIN, STRAIGHT FLANGE, ATM SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION ATM15-6P-BMXX SHEET 1 A2 OF 1 1 6. POTTED CONNECTORS SPECIFIED FOR UP TO 5 P.S.I. APPLICATIONS. VIEW FROM COMPONENTS SIDE OF PCB SH: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY RECOMMENDED PCB LAYOUT RECOMMENDED PANEL CUTOUT A2 4. MATING PART: ATM06-6S* (* = ALL MODIFICATIONS) 8.40±0.10 2x R6.00 21.05 6x R1.00 2. MODIFICATIONS: FLANGE; STRAIGHT PCB MOUNT 3. SPECIFICATIONS: 3.1 CURRENT RATING: 7.5 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT 4.20±0.05 Ø3.43 (4x) REV: 1. MATERIAL: HOUSING: THERMOPLASTIC, GREY SEAL: SILICONE RUBBER CONTACT: COPPER ALLOY 21.90±0.1 ATM15-6P-BMXX 6x Ø1.0±0.12 NOTES: UNLESS OTHERWISE SPECIFIED DWG NO: 21.05 4.13 5.7