ATP04-6P-EC01BK

REVISIONS 49.1±0.5 REV ECO A1 - DESCRIPTION DATE RELEASE DRAWING BY 24/AUG/19 APPR PETER TOMMY TITLE: RECEPTACLE, 6 PIN,END CAP,ATP SERIES 6 REQUIRES CONTACT RETENTION WEDGE AWP-6P END CAP 33.5 DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED ATP04-6P-EC01XX 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 2. MODIFICATIONS: END CAP 27.0 REV: A1 SH: 1 PART NUMBER CHART COLOR PART NUMBER 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. GREY ATP04-6P-EC01 BLACK ATP04-6P-EC01BK SEE PART NUMBER CHART DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE 12 3.40 mm (.134 in) 4.95 mm (.195 in) 10 - 14 AWG STANDARD MOLDED COLOR IS GREY. ADDITIONAL COLOR ( BLACK ) IS AVAILABLE VIA SPECIAL ORDER. X SIGNATURES DRAWN: CHECKED: Amphenol DATE PETER.YANG ORION.LI 24/AUG/19 24/AUG/19 TOMMY.XIE 24/AUG/19 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: ITEM CUSTOMER: RECEPTACLE, 6 PIN,END CAP, ATP SERIES PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION ATP04-6P-EC01XX SHEET 1 A1 OF 1 1 4. MATING PART: ATP06-6S* PLUG. ( * = MODIFICATIONS AND COLORS ) OF: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 25 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT A Series™ - Contact Size 12 Options (Works with: AHD-6, ATP, ATHD, DuraMate and PanelMate Series) Machined Contacts, Sockets & Pins Part Number Description Stamped & Formed Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type *AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed *AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed Part Number Description *Works with ATP Series only DiagnosticGrade™ Machined Contacts, Sockets & Pins • Smaller AWG for Diagnostic Applications • Gold-plated • Increased Mating Cycles • Cost-effective Part Number Description 65-54749 AT62-210-1231-1820 Size AWG Type Male Contact - DiagnosticGrade™, Pin, Gold-plated 12 20 Machined Female Contact - DiagnosticGrade™, Socket, Gold-plated 12 20 Machined Tooling - Machined Contacts Part Number Tooling - Stamped & Formed Contacts MFX-3973 Crimp Die - Size 12 MFX-3985 Crimp Die - Svize 12, 10-12AWG -02XX Series ATT-12-00 Hand Crimp Tool - Size 12, 12AWG ATT-12-01 Hand Crimp Tool - Size 12, 10AWG Description AUTK-12 Hand Crimp Tool, Size 12 AUTK-100 Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20 CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 M300-25A Hand Crimp Tool used with Crimp Locator MFX-3966, Size 12, 10AWG MFX-3966 Contact Locator used with Hand Crimp Tool M300-25A, Size 12, 10AWG Contact Removal Tools (For both Machined or Stamped & Formed Contacts) Part Number ATRT-100 AT11-337-1205 Description Contact and Wedgelock Extraction Tool Contact Removal Tool, Plastic, Size 12 Sealing Plugs (For both Machined or Stamped & Formed Contacts) Part Number A114017 Description Sealing Plug, Size 12, White Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10/2023