ATP04-6P-PM05SR

REVISIONS 34.45 2X R1.1 34.45 17.23 5.68 2X R1.3 4X R8.0 17.23 REV ECO DESCRIPTION DATE BY APPR A1 - RELEASED DRAWING 04JAN21 LOUIE TOMMY A2 - UPDATE DRAWING 10MAY21 SULLEN TOMMY 4X R8.00 END CAP AND STRAIN RELIEF - BLACK - ALL CONNECTORS 26.1 14.0 14.0 33.5 28.0 28.0 TITLE: 14.25 2X Ø5.80 7.1 49.15 2X Ø5.80 INTERNAL SEALING SUFACE FINISH TO BE 3.2 OR BETTER 0.13 RECOMMENDED PANEL CUTOUT TYPE 1 20.6 61.0±0.6 49.1±0.6 49.15 INTERNAL SEALING SUFACE FINISH TO BE 3.2 OR BETTER 0.13 RECOMMENDED PANEL CUTOUT TYPE 2 47.3 SHOWN WITH END CAP SHOWN WITH STRAIN RELIEF REQUIRES CONTACT RETENTION WEDGE AWP-6P FLANGE GASKET 8.5 +0.30 27.0+0.30 -0.60 38.3-0.70 22.1 PART NUMBER 6 GREY BLACK BLACK BLACK DWG NO: ATP04-6P-PM0x ATP04-6P-PM0xBK PART NUMBER CHART HOUSING AND STRAIN RELIEF AND INSERT COLOR END CAP COLOR 49.2 NOTES: UNLESS OTHERWISE SPECIFIED END CAP ATP04-6P-PM05XX STANDARD NO ATP04-6P-PM06XX REDUCED DIA. NO NO 37.2 ATP04-6P-PM05ECXX STANDARD YES NO 39.6 ATP04-6P-PM06ECXX REDUCED DIA. YES NO 39.6 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. ATP04-6P-PM05SRXX NO YES 45.8 6. CONTACT SIZE AND REAR SEAL WIRE RANGE: ATP04-6P-PM06SRXX REDUCED DIA. NO YES 45.8 ATP04-6P-PM0xXX 3.40 mm (.134 in) 4.95 mm (.195 in) DESCRIPTION PART NUMBER QUANTITY 10 - 14 AWG (5.0-2.0mm²) DRAWN: CHECKED: REDUCED DIAMETER SEAL: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE 12 2.46 mm (.097 in) 4.01 mm (.158 in) 12 - 14 AWG (3.0-2.0mm²) 1 CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE 12 OF: STANDARD SEAL: STANDARD 1 4. MATING PART: ATP06-6S* PLUG. ( * = MODIFICATIONS AND COLORS ) RECOMMENDED TORQUE VALUES: 1.9~2.2N.M STRAIN WEIGHT RELIEF (GRAMS) NO 37.2 SEAL SH: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 25 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP68 (1M OF WATER FOR A PERIOD OF 24 HOURS , MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT PART NUMBER A2 2. MODIFICATIONS: FLANGE, END CAP (OPT), REDUCED DIAMETER WIRE SEAL (OPT), STRAIN RELIEF (OPT) M5 X 0.8, DEEP 8.0(2X) THREADED INSERT REV: 1. MATERIAL: HOUSING: THERMOPLASTIC; COLOR: SEE PART NUMBER CHART INSERT: THERMOPLASTIC; COLOR: SEE PART NUMBER CHART END CAP: THERMOPLASTIC; COLOR: BLACK STRAIN RELIEF: THERMOPLASTIC; COLOR: BLACK SEAL: SILICONE RUBBER; COLOR: RED FOR STANDARD, YELLOW FOR REDUCED DIA. FLANGE GASKET: SILICONE RUBBER; COLOR: RED MODIFICATIONS 64.7 MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: 6 POS, RECEPTACLE, PIN, ATP SERIES, W/ FLANGE, GASKET,THREADED INSERT THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE A2 SHEET 1 OF 1 A Series™ - Contact Size 12 Options (Works with: AHD-6, ATP, ATHD, DuraMate and PanelMate Series) Machined Contacts, Sockets & Pins Part Number Description Stamped & Formed Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type *AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed *AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed Part Number Description *Works with ATP Series only DiagnosticGrade™ Machined Contacts, Sockets & Pins • Smaller AWG for Diagnostic Applications • Gold-plated • Increased Mating Cycles • Cost-effective Part Number Description 65-54749 AT62-210-1231-1820 Size AWG Type Male Contact - DiagnosticGrade™, Pin, Gold-plated 12 20 Machined Female Contact - DiagnosticGrade™, Socket, Gold-plated 12 20 Machined Tooling - Machined Contacts Part Number Tooling - Stamped & Formed Contacts MFX-3973 Crimp Die - Size 12 MFX-3985 Crimp Die - Svize 12, 10-12AWG -02XX Series ATT-12-00 Hand Crimp Tool - Size 12, 12AWG ATT-12-01 Hand Crimp Tool - Size 12, 10AWG Description AUTK-12 Hand Crimp Tool, Size 12 AUTK-100 Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20 CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 M300-25A Hand Crimp Tool used with Crimp Locator MFX-3966, Size 12, 10AWG MFX-3966 Contact Locator used with Hand Crimp Tool M300-25A, Size 12, 10AWG Contact Removal Tools (For both Machined or Stamped & Formed Contacts) Part Number ATRT-100 AT11-337-1205 Description Contact and Wedgelock Extraction Tool Contact Removal Tool, Plastic, Size 12 Sealing Plugs (For both Machined or Stamped & Formed Contacts) Part Number A114017 Description Sealing Plug, Size 12, White Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10/2023