ATP06-2S-EC01

REVISIONS 36.5 REV ECO A3 - DESCRIPTION RELEASE NEW DWG FORMAT DATE BY APPR 10/18/13 JARRY - TITLE: PLUG, 2 SOCKET,END CAP ATP SERIES 6 REQUIRES CONTACT RETENTION WEDGE AWP-2S 20.9 DWG NO: NOTES: UNLESS OTHERWISE SPECIFIED ATP06-2S-EC01XX 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 2. MODIFICATIONS: END CAP 22 A3 END CAP 1 MIN. INSUL O.D. MAX. INSUL O.D. TYPICAL WIRE RANGE 12 3.40 mm (.134 in) 4.95 mm (.195 in) 10 - 14 AWG SEE PART NUMBER CHART DESCRIPTION PART NUMBER QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED COLOR PART NUMBER 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 GREY ATP06-2S-EC01 3) Note reference = BLACK ATP06-2S-EC01BK MATERIAL SPECIFICATIONS: X SIGNATURES DRAWN: JARRY ITEM Amphenol DATE 10/18/13 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: CUSTOMER: PLUG, 2 SOCKET,END CAP, ATP SERIES STANDARD MOLDED COLOR IS GREY. ADDITIONAL COLOR ( BLACK ) IS AVAILABLE VIA SPECIAL ORDER. PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION ATP06-2S-EC01XX SHEET 1 A3 OF 1 1 CONTACT SIZE OF: PART NUMBER CHART 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: SH: 4. MATING PART: ATP04-2P* RECEPTACLE. ( * = MODIFICATIONS AND COLORS ) REV: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 25 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT ATP Series™ - Contact Size 12 Options Machined Contacts, Sockets & Pins Part Number Description Stamped & Formed Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed DiagnosticGrade™ Machined Contacts, Sockets & Pins • Smaller AWG for Diagnostic Applications • Gold-plated • Increased Mating Cycles • Cost-effective Part Number 65-54749 AT62-210-1231-1820 Description Size AWG Type Male Contact - DiagnosticGrade™, Pin, Gold-plated 12 20 Machined Female Contact - DiagnosticGrade™, Socket, Gold-plated 12 20 Machined Tooling - Machined Contacts Part Part Number Description CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) M300-25A Hand Crimp Tool used with Crimp Locator MFX-3966, Size 12, 10AWG (Machined contacts only) MFX-3966 Contact Locator used with Hand Crimp Tool M300-25A, Size 12, 10AWG (Machined contacts only) Tooling - Stamped & Formed Contacts Part Part Number Description MFX-3973 Crimp Die - Size 12 (S&F contacts only) MFX-3985 Crimp Die - Svize 12 (S&F contacts only) 10-12AWG -02XX Series ATT-12-00 Hand Crimp Tool - Size 12, 12AWG (S&F contacts only) ATT-12-01 Hand Crimp Tool - Size 12, 10AWG (S&F contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-337-1205 A114017 Description Used for removal of contacts for A Series™ products Contact Removal Tool, Plastic, Size 12 Sealing Plug, Size 12, White Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2022