ATP06-4S-RD01

REVISIONS 34.9 REV ECO DESCRIPTION DATE BY A3 - RELEASE NEW DWG FORMAT 18/OCT/13 DRP APPR - A3N - ADD RATED VOLTAGE 26/MAR/18 ORION TOMMY A4 - UPDATE SHAPE OF LATCH 07/OCT/20 SULLEN TOMMY 22 TITLE: 6 REDUCED DIAMETER SEAL REQUIRES CONTACT RETENTION WEDGE AWP-4S 24 NOTES: UNLESS OTHERWISE SPECIFIED DWG NO: 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER 2. MODIFICATIONS: REDUCED DIAMETER WIRE SEAL SEE PART NUMBER CHART PART NUMBER PART NUMBER CHART COLOR PART NUMBER REF. GREY ATP06-4S-RD01 DTP06-4S-C015 BLACK ATP06-4S-RD01BK DTP06-4S-CE02 DRAWN: CHECKED: 12 2.46 mm (.097 in) 4.01 mm (.158 in) X STANDARD MOLDED COLOR IS GREY. ADDITIONAL COLOR ( BLACK ) IS AVAILABLE VIA SPECIAL ORDER. DESCRIPTION QUANTITY 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE OF: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. REFER TO PART NUMBER CHART FOR AVAILABLE CONNECTOR COLORS SH: 4. MATING PART: ATP04-4P* RECEPTACLE. ( * = MODIFICATIONS AND COLORS ) REV: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 25 AMPS 3.2 VOLTAGE RATING: 500 V AC/DC (UL1977) 3.3 OPERATING TEMPERATURE: -55°C TO +125°C 3.4 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 2500 VOLTS AC. 3.5 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.6 MOISTURE RESISTANCE: IP68(1M OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION) IP69K(MATED CONDITION) 3.7 MATING CYCLE DURABILITY: 100 CYCLES 3.8 ROHS COMPLIANT Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: 12 - 14 AWG (3.0-2.0mm²) 4 POS, PLUG, SOCKET, REDUCED DIAMETER SEAL, ATP SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE SHEET 1 OF 1 ATP Series™ - Contact Size 12 Options Machined Contacts, Sockets & Pins Part Number Description Stamped & Formed Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed DiagnosticGrade™ Machined Contacts, Sockets & Pins • Smaller AWG for Diagnostic Applications • Gold-plated • Increased Mating Cycles • Cost-effective Part Number 65-54749 AT62-210-1231-1820 Description Size AWG Type Male Contact - DiagnosticGrade™, Pin, Gold-plated 12 20 Machined Female Contact - DiagnosticGrade™, Socket, Gold-plated 12 20 Machined Tooling - Machined Contacts Part Part Number Description CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) M300-25A Hand Crimp Tool used with Crimp Locator MFX-3966, Size 12, 10AWG (Machined contacts only) MFX-3966 Contact Locator used with Hand Crimp Tool M300-25A, Size 12, 10AWG (Machined contacts only) Tooling - Stamped & Formed Contacts Part Part Number Description MFX-3973 Crimp Die - Size 12 (S&F contacts only) MFX-3985 Crimp Die - Svize 12 (S&F contacts only) 10-12AWG -02XX Series ATT-12-00 Hand Crimp Tool - Size 12, 12AWG (S&F contacts only) ATT-12-01 Hand Crimp Tool - Size 12, 10AWG (S&F contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-337-1205 A114017 Description Used for removal of contacts for A Series™ products Contact Removal Tool, Plastic, Size 12 Sealing Plug, Size 12, White Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2022