ATP06-4S-SR02

REVISIONS 48.5±0.6 REV ECO A1 - DESCRIPTION RELEASE NEW DRAWING DATE BY APPR 09/MAY/22 IAN TOMMY STRAIN RELIEF END CAP BLACK - ALL CONNECTORS TITLE: CONNECTOR STANDARD COLOR IS GREY. OTHER COLORS FOR OPTION. 4 POS,PLUG,SOCKET,ATP SERIES,STRAIN RELIEF END CAP REQUIRES CONTACT RETENTION WEDGE AWP-4S 25.2 DWG NO: 6 PART NUMBER SEAL BLACK 14.2 BLACK BLACK 14.2 ATP06-4S-SR02 REDUCED DIA. GREY BLACK 14.2 ATP06-4S-SR02BK REDUCED DIA. BLACK BLACK 14.2 QUANTITY CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE 12 3.40 mm (.134 in) 4.95 mm (.195 in) 10 - 14 AWG (5.0-2.0mm²) SEE PART NUMBER CHART DESCRIPTION PART NUMBER MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = REDUCED DIAMETER SEAL: GREEN X SIGNATURES DRAWN: CHECKED: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 12 2.46 mm (.097 in) 4.01 mm (.158 in) 12 - 14 AWG (3.0-2.0mm²) 09/MAY/22 09/MAY/22 TOMMY 10/MAY/22 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: TYPICAL CONTACT MIN. INSUL MAX. INSUL O.D. O.D. WIRE RANGE SIZE Amphenol DATE IAN SULLEN CUSTOMER: WEIGHT:14.2g PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. 4 POS,PLUG,SOCKET,ATP SERIES, STRAIN RELIEF END CAP TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION ATP06-4S-SR0X SHEET 1 A1 OF 1 1 STANDARD SEAL: RED OF: 6 CONTACT SIZE AND REAR SEAL WIRE RANGE: MATERIAL SPECIFICATIONS: 4. MATING PART: ATP04-4P* RECEPTACLE. ( * = MODIFICATIONS AND COLORS ) 1 GREY STANDARD SH: STANDARD A1 ATP06-4S-SR01 ATP06-4S-SR01BK REV: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 25 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP68(IM OF WATER FOR A PERIOD OF 24 HOURS,MATED CONDITION); IP69K(MATED CONDITION). 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 ROHS COMPLIANT PART NUMBER CHART HOUSING STRAIN RELIEF WEIGHT (GRAMS) COLOR COLOR 25.4 2. MODIFICATIONS: REDUCED DIAMETER WIRE SEAL (OPT), STRAIN RELIEF END CAP ATP06-4S-SR0X NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL: HOUSING: THERMOPLASTIC; COLOR: SEE PART NUMBER CHART STRAIN RELIEF: THERMOPLASTIC; COLOR: BLACK SEAL: SILICONE RUBBER; COLOR: SEE NOTE 6 A Series™ - Contact Size 12 Options (Works with: AHD-6, ATP, ATHD, DuraMate and PanelMate Series) Machined Contacts, Sockets & Pins Part Number Description Stamped & Formed Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type *AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed *AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed Part Number Description *Works with ATP Series only DiagnosticGrade™ Machined Contacts, Sockets & Pins • Smaller AWG for Diagnostic Applications • Gold-plated • Increased Mating Cycles • Cost-effective Part Number Description 65-54749 AT62-210-1231-1820 Size AWG Type Male Contact - DiagnosticGrade™, Pin, Gold-plated 12 20 Machined Female Contact - DiagnosticGrade™, Socket, Gold-plated 12 20 Machined Tooling - Machined Contacts Part Number Tooling - Stamped & Formed Contacts MFX-3973 Crimp Die - Size 12 MFX-3985 Crimp Die - Svize 12, 10-12AWG -02XX Series ATT-12-00 Hand Crimp Tool - Size 12, 12AWG ATT-12-01 Hand Crimp Tool - Size 12, 10AWG Description AUTK-12 Hand Crimp Tool, Size 12 AUTK-100 Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20 CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 M300-25A Hand Crimp Tool used with Crimp Locator MFX-3966, Size 12, 10AWG MFX-3966 Contact Locator used with Hand Crimp Tool M300-25A, Size 12, 10AWG Contact Removal Tools (For both Machined or Stamped & Formed Contacts) Part Number ATRT-100 AT11-337-1205 Description Contact and Wedgelock Extraction Tool Contact Removal Tool, Plastic, Size 12 Sealing Plugs (For both Machined or Stamped & Formed Contacts) Part Number A114017 Description Sealing Plug, Size 12, White Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10/2023