ATP15-2P-BM02GRY

REVISIONS REV ECO DESCRIPTION A1 RELEASE DATE BY APPR 6JUN19 JAH TOMMY DH A2 REVISED DRAWING 10JUL20 JHEAD A3 UPDATE DP FOR THREAD-FORMING SCREW HOLE 11SEP23 HARRIS TOMMY 34.0 44.0 32.9 PIN #1 RESERVOIR 15.3 4.5 21.6 17.2 TITLE: 0.8 31.1 2.5 7.8 2xØ3.10±0.12x13.25 DP RECOMMENDED SCREW: 6-19 [M3.63 x 1.34] THREAD-FORMING SCREW, TORQUE: 11-15 IN-LB [1.24-1.70 NM] 4.0 4XR10.0 2xØ2.79±0.12x10.15 DP 24.0 RECOMMENDED SCREW: 4-20 [M3.12 x 1.27] THREAD-FORMING SCREW, TORQUE: 6-10 IN-LB [0.68-1.13 NM] FLANGE SEAL 22.0 4.0 6.7 15.3 SEAL RETAINER 36.1 32.9 24.00±0.10 2XØ3.43 23.00 RECEPTACLE HOUSING DWG NO: 2XØ2.60+0.1 0 17.17±0.10 22.55 2XØ3.96 NOTES: UNLESS OTHERWISE SPECIFIED 7.81±0.10 6.70±0.05 4XR4.35 2XØ2.38 INTERNAL SEALING SURFACE FINISH TO BE 3.2 OR BETTER RECOMMENDED PCB LAYOUT 0.13 RECOMMENDED PANEL CUTOUT REV: 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER CONTACT: COPPER ALLOY VIEW FROM COMPONENTS SIDE OF PCB 4. MATING PART: ATP06-2S* (* = ALL MODIFICATIONS) 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY 6. POTTED CONNECTORS SPECIFIED FOR UP TO 5 P.S.I. APPLICATIONS. ATP15-2P-BM0XXXX VARIANTS CONTACT POTTING OR NOT PLATING IN RESERVOIR GOLD NO POTTING COLOR GRAY ATP15-2P-BM0XXXX PART NUMBER PART NUMBER ATP15-2P-BM01GRY GOLD POTTING GRAY ATP15-2P-BM02GRY TIN NO POTTING GRAY ATP15-2P-BM03GRY TIN POTTING GRAY ATP15-2P-BM04GRY GOLD NO POTTING BLACK ATP15-2P-BM01BLK GOLD POTTING BLACK ATP15-2P-BM02BLK NO POTTING BLACK ATP15-2P-BM03BLK TIN POTTING BLACK ATP15-2P-BM04BLK DESCRIPTION QUANTITY DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: TIN OF: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 25 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT SH: 2. MODIFICATIONS: FLANGE; PCB MOUNT STRAIGHT PROCESS SPECIFICATIONS: BOARDLOCK PCB MOUNT RECEPTACLE, 2 PIN, ST FLANGE, ATP SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE A3 SHEET 1 OF 1