ATP15-4P-BM01BLK

REVISIONS 54.1 REV ECO DESCRIPTION A1 - RELEASE A2 - REVISED DRAWING 34.0 41.4 15.3 10JUL20 JHEAD DH 4.1 10.2 27.0 APPR TOMMY 2.5 17.2 TITLE: 36.5 BY JAH PIN #1 28.5 RESERVOIR 4.6 DATE 6JUN19 BOARDLOCK PCB MOUNT RECEPTACLE 4PIN, RA FLANGE, ATP SERIES 2xØ3.10±0.12x11.25 DP RECOMMENDED SCREW: 6-19 [M3.63 x 1.34] THREAD-FORMING SCREW, TORQUE: 11-15 IN-LB [1.24-1.70 NM] 6XR6.4 15.3 2xØ2.79±0.12 DP 3.8 3.8 RECOMMENDED SCREW: 4-20 [M3.12X1.27] THREAD-FORMING SCREW, TORQUE:6-10 IN-LB [0.68-1.13 NM] FLANGE SEAL 6.7 30.2 26.9 41.40 28.45±0.10 27.85 DWG NO: 6.70±0.05 4.09±0.10 10.88±0.10 10.16±0.05 NOTES: UNLESS OTHERWISE SPECIFIED 8.60 4XØ2.38 2XØ3.96 12.1 4XR8.2 0.13 4XØ2.58+0.1 0 RECOMMENDED PCB LAYOUT RECOMMENDED PANEL CUTOUT 1 ATP15-4P-BM0XXXX VARIANTS ATP15-4P-BM0XXXX PART NUMBER NO POTTING GRAY ATP15-4P-BM01GRY GOLD POTTING GRAY ATP15-4P-BM02GRY TIN NO POTTING GRAY ATP15-4P-BM03GRY TIN POTTING GRAY ATP15-4P-BM04GRY GOLD NO POTTING BLACK ATP15-4P-BM01BLK GOLD POTTING BLACK ATP15-4P-BM02BLK 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY TIN NO POTTING BLACK ATP15-4P-BM03BLK 6. POTTED CONNECTORS SPECIFIED FOR UP TO 5 P.S.I. APPLICATIONS. TIN POTTING BLACK ATP15-4P-BM04BLK QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = REF: DTP15-4P DESCRIPTION PART NUMBER MATERIALS LIST X SIGNATURES DRAWN: CHECKED: 14MAY19 14MAY19 TOMMY.XIE 14MAY19 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: Amphenol DATE PETER.YANG ORION.LI ITEM BOARDLOCK PCB MOUNT RECEPTACLE, 4 PIN, ST FLANGE, ATP SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: REVISION B C- ATP15-4P-BM0XXXX A2 NEXT ASS'Y: NONE SHEET 1 OF 1 1 COLOR OF: CONTACT POTTING OR NOT PLATING IN RESERVOIR GOLD 4. MATING PART: ATP06-4S* (* = ALL MODIFICATIONS) SH: VIEW FROM COMPONENTS SIDE OF PCB 2. MODIFICATIONS: FLANGE; PCB MOUNT STRAIGHT 3. SPECIFICATIONS: 3.1 CURRENT RATING: 25 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT A2 INTERNAL SEALING SURFACE FINISH TO BE OR BETTER REV: 1. MATERIAL: HOUSING: THERMOPLASTIC SEAL: SILICONE RUBBER CONTACT: COPPER ALLOY ATP15-4P-BM0XXXX 2XØ3.43 27.95