ATP4PS-CKIT

REVISIONS 47.3 REV ECO DESCRIPTION A - RELEASE 10/SEP/13 B - UPDATE SHAPE OF LATCH 07/OCT/20 DATE BY APPR DRP - SULLEN TOMMY 34.9 TITLE: 27 22 7 7 26.7 24 DWG NO: REFERENCE DIMENSIONS - ASSEMBLED RECEPTACLE REFERENCE DIMENSIONS - ASSEMBLED PLUG 6 4 REV: 5 SH: OF: 61.6 ASSEMBLED PLUG AND RECEPTACLE 2 1 KIT CONTENTS 3 NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL: HOUSING: THERMOPLASTIC; COLOR: GREY WEDGELOCK: THERMOPLASTIC; COLOR: ORANGE SEALS: SILICONE RUBBER CONTACTS: COPPER ALLOY; NICKEL PLATED 6 3. AVAILABLE HAND CRIMPER: CA-5D12 6 2. SPECIFICATIONS: 2.1 CURRENT RATING: 25 AMPS 2.2 VOLTAGE RATING: 500 V AC/DC (UL1977) 2.3 OPERATING TEMPERATURE: -55°C TO +125°C 2.4 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 2500 VOLTS AC. 2.5 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C. 2.6 CONTACT MILLIVOLT DROP: 60 MILLIVOLT DROP @ 25 AMP TEST CURRENT. 2.7 MOISTURE RESISTANCE: IP68(1M OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION) IP69K(MATED CONDITION) 2.8 CONNECTOR MATING CYCLE DURABILITY: 100 CYCLES 4. ALL COMPONENTS ARE RoHS COMPLIANT. 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 4 1 1 4 1 1 AT60-204-12141 AWP-4P ATP04-4P AT62-203-12141 AWP-4S ATP06-4S QUANTITY 4.95 mm (.195 in) 10 - 14 AWG (5.0-2.0mm²) ITEM CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: 3.40 mm (.134 in) DESCRIPTION DRAWN: 7 CONTACT SIZE AND REAR SEAL WIRE RANGE: 12 6 5 4 3 2 1 PART NUMBER 6 WIRE RANGE OF CONTACTS INCLUDED IN KIT: 12 - 14 AWG CONTACT MIN. INSUL. MAX. INSUL. TYPICAL SIZE O.D. O.D. WIRE RANGE CONTACT, PIN, SOLID, SIZE 12, 12 - 14 AWG P-WEDGELOCK, 4 POSITION, ATP SERIES RECEPTACLE, 4 POSITION, ATP SERIES CONTACT, SOCKET, SOLID, SIZE 12, 12 - 14 AWG S-WEDGELOCK, 4 POSITION, ATP SERIES PLUG, 4 POSITION, ATP SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: C NEXT ASS'Y: NONE B SHEET 1 OF 1