BLA1011-300
Avionics LDMOS transistors
Rev. 3 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
300 W LDMOS pulsed power transistor for TCAS and IFF applications at frequencies
from 1030 MHz to 1090 MHz.
Table 1.
Typical performance
RF performance at Tcase = 25 C in a common source class-AB production test circuit; tp = 50 s;
= 2 %.
Mode of operation
Pulsed class-AB
f
IDq
VDS
PL
Gp
D
(MHz)
(mA)
(V)
(W)
(dB)
(%)
1030 to 1090
150
32
300
16.5
57
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features
Typical performance at frequencies between 1030 MHz and 1090 MHz, a supply
voltage of 32 V, an IDq of 150 mA, a tp of 50 s and a of 2 %:
Output power = 300 W
Power gain = 16.5 dB (typ)
Efficiency = 57 % (typ)
Easy power control
Excellent ruggedness
High efficiency
Excellent thermal stability
Designed for operation in 1030 MHz to 1090 MHz band
Internally matched for ease of use
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
RF power amplifiers for Avionics applications in the 1030 MHz to 1090 MHz frequency
band
BLA1011-300
Avionics LDMOS transistors
2. Pinning information
Table 2.
Pinning
Pin
Description
1
drain
2
gate
3
source
Simplified outline
Symbol
1
[1]
1
3
2
2
3
sym112
[1]
Connected to flange
3. Ordering information
Table 3.
Ordering information
Type number
Package
BLA1011-300
Name
Description
Version
-
flanged LDMOST ceramic package; 2 mounting
holes; 2 leads
SOT957A
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Min
Max
Unit
VDS
drain-source voltage
Conditions
-
65
V
VGS
gate-source voltage
0.5
+15
V
ID
drain current
-
15
A
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
200
C
5. Thermal characteristics
BLA1011-300#3
Product data sheet
Table 5.
Thermal characteristics
Symbol
Parameter
Conditions
Typ
Max
Unit
Zth(j-h)
transient thermal impedance from
junction to heatsink
Tcase = 25 C; tp = 50 s;
= 2 %; PL = 300 W
0.1
0.15
K/W
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 12
BLA1011-300
Avionics LDMOS transistors
6. Characteristics
Table 6.
Characteristics
Tj = 25 C unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
V(BR)DSS drain-source
breakdown voltage
VGS = 0 V; ID = 3.75 mA
65
-
-
V
VGS(th)
gate-source threshold
voltage
VDS = 20 V; ID = 375 mA
5.2
5.6
6.2
V
VGSq
gate-source quiescent
voltage
VDS = 32 V; ID = 150 mA
-
5.48
-
V
IDSS
drain leakage current
VGS = 0 V; VDS = 32 V
-
-
3.3
A
IDSX
drain cut-off current
VGS = VGS(th) + 6 V; VDS = 10 V
50
63
73
A
IGSS
gate leakage current
VGS = 13 V; VDS = 0 V
-
-
60
nA
gfs
forward
transconductance
VDS = 20 V; ID = 24 A
-
15
-
S
RDS(on)
drain-source on-state
resistance
VGS = VGS(th) + 6 V; ID =13.5 A
-
55
80
m
7. Application information
Table 7.
Application information
Mode of operation: Pulsed RF; tp = 50 s; = 2 %; VDS = 32 V; IDq = 150 mA; Tcase = 25 C; unless
otherwise specified.
BLA1011-300#3
Product data sheet
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
PL
output power
300
-
-
W
Gp
power gain
PL = 300 W
15
16.5
-
dB
RLin
input return loss
PL = 300 W
-
10
-
dB
D
drain efficiency
PL = 300 W
52
57
-
%
tr
rise time
PL = 300 W
-
30
50
ns
tf
fall time
PL = 300 W
-
5
50
ns
Pdroop(pulse)
pulse droop power
PL = 300 W
-
0
0.2
dB
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 12
BLA1011-300
Avionics LDMOS transistors
Table 8.
Typical impedance
f
ZS
ZL
MHz
1030
4.25 j3.57
1.27 j0.33
1060
4.24 j3.56
1.04 j0.41
1090
4.47 j3.71
0.91 j0.60
drain
ZL
gate
ZS
001aag189
Fig 1. Definition of transistor impedance
7.1 Ruggedness in class-AB operation
The BLA1011-300 is capable of withstanding a load mismatch corresponding to
VSWR = 10 : 1 through all phases under the following conditions: VDS = 32 V;
IDq = 150 mA; PL = 300 W; f = 1030 MHz to 1090 MHz.
001aag190
80
001aag191
20
Gp
(dB)
ηD
(%)
(2)
(3)
(1)
16
60
12
(1)
(2)
(3)
40
8
20
4
0
0
0
100
200
300
400
0
100
PL (W)
(1) f = 1030 MHz
(2) f = 1060 MHz
(2) f = 1060 MHz
(3) f = 1090 MHz
(3) f = 1090 MHz
BLA1011-300 in a wideband circuit; VDS = 32 V;
IDq = 150 mA; tp = 50 s; = 2 %.
Fig 2. Drain efficiency as functions of load power;
typical values
Product data sheet
300
400
PL (W)
(1) f = 1030 MHz
BLA1011-300#3
200
BLA1011-300 in a wideband circuit; VDS = 32 V;
IDq = 150 mA; tp = 50 s; = 2 %.
Fig 3. Power gain as a function of load power; typical
values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 12
BLA1011-300
Avionics LDMOS transistors
001aag192
400
Gp
(dB)
PL
(W)
18
300
(3)
(1)
(2)
001aag193
20
70
ηD
(%)
ηD
60
Gp
16
50
14
40
12
30
200
100
0
0
2
4
6
8
10
10
1020
1040
Pi (W)
1060
20
1100
1080
f (MHz)
VDS = 32 V; IDq = 150 mA; tp = 50 s; = 2 %.
(1) f = 1030 MHz
(2) f = 1060 MHz
(3) f = 1090 MHz
BLA1011-300 in a wideband circuit; VDS = 32 V;
IDq = 150 mA; tp = 50 s; = 2 %.
Fig 4. Load power as a function of input power;
typical values
BLA1011-300#3
Product data sheet
Fig 5. Power gain and drain efficiency as functions of
frequency; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 12
BLA1011-300
Avionics LDMOS transistors
8. Test information
C5
C8
R1
C9 C12
C10
C11
C6
L1
C7
R2
C2
C1
T3
T1
T4
T6
T2
T7 T8
T5
C4
C3
001aah710
Printed-Circuit Board (PCB): Rogers Duroid 6006; r = 6.2 F/m; height = 0.64 mm.
See Table 9 for list of components.
Fig 6. Component layout for common source class-AB pulsed production test circuit
Table 9.
List of components (see Figure 6)
To ensure good power supply of the device, adding an electrolytic capacitor close to the supply
connection of the circuit may be required. The actual capacitor value may differ depending on the
pulse format, the quality of the power supply and the length of the connecting wires to the power
supply. In general a value of 470 F will be sufficient.
Component Description
BLA1011-300#3
Product data sheet
Value
Remarks
C1, C4
multilayer ceramic chip capacitor 62 pF
[1]
C2, C3
multilayer ceramic chip capacitor 1.5 pF
[2]
C5
multilayer ceramic chip capacitor 100 pF
[2]
C6, C8
multilayer ceramic chip capacitor 62 pF
[2]
C7
multilayer ceramic chip capacitor 10 pF
[2]
C9
multilayer ceramic chip capacitor 1.2 nF
[1]
C10
electrolytic capacitor
47 F; 20 V
C11
electrolytic capacitor
47 F; 63 V
C12
multilayer ceramic chip capacitor 47 pF
L1
-shaped enameled copper wire d = 1 mm;
length = 38 mm
R1
SMD resistor
18
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
[1]
0508 package
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 12
BLA1011-300
Avionics LDMOS transistors
Table 9.
List of components (see Figure 6) …continued
To ensure good power supply of the device, adding an electrolytic capacitor close to the supply
connection of the circuit may be required. The actual capacitor value may differ depending on the
pulse format, the quality of the power supply and the length of the connecting wires to the power
supply. In general a value of 470 F will be sufficient.
BLA1011-300#3
Product data sheet
Component Description
Value
R2
metal film resistor
49.9
T1
stripline
-
(W L) 5 mm 9 mm
T2
stripline
-
(W L) 1.25 mm 7.5 mm
T3
stripline
-
(W L) 15 mm 11 mm
T4
stripline
-
(W L) 40 mm 16.8 mm
T5
stripline
-
(W L) 1 mm 6.25 mm
T6
stripline
-
(W L) 4.95 mm 3.55 mm
T7
stripline
-
(W L) 9.4 mm 3 mm
T8
stripline
-
(W L) 12 mm 2.45 mm
[1]
American Technical Ceramics type 100A or capacitor of same quality.
[2]
American Technical Ceramics type 100B or capacitor of same quality.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
Remarks
© Ampleon The Netherlands B.V. 2015. All rights reserved.
7 of 12
BLA1011-300
Avionics LDMOS transistors
9. Package outline
Flanged ceramic package; 2 mounting holes; 2 leads
SOT957A
D
A
F
3
D1
U1
B
q
C
1
L
U2
H
c
E1
p
w1
A
M
A
M
B
E
M
2
w2
b
0
M
C
5
Q
M
10 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
b
c
D
D1
E
E1
F
H
L
P
Q
q
U1
U2
w1
w2
mm
4.67
4.08
12.83
12.57
0.15
0.10
22.07
21.62
22.04
21.64
9.53
9.27
9.55
9.25
1.14
0.89
19.94
18.92
5.33
4.31
3.38
3.12
1.70
1.45
27.94
34.16
33.91
9.91
9.65
0.25
0.25
0.184 0.505
0.1605 0.495
0.006
0.004
0.869
0.851
0.868
0.852
0.375
0.365
0.376
0.364
0.045
0.035
0.785
0.745
0.210
0.170
0.133
0.123
0.067
0.057
1.100
1.345
1.335
0.390
0.380
0.01
0.01
inches
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
07-03-01
12-05-02
SOT957A
Fig 7. Package outline SOT957A
BLA1011-300#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 12
BLA1011-300
Avionics LDMOS transistors
10. Abbreviations
Table 10.
Abbreviations
Acronym
Description
IFF
Identification Friend or Foe
LDMOS
Laterally Diffused Metal Oxide Semiconductor
LDMOST
Laterally Diffused Metal-Oxide Semiconductor Transistor
RF
Radio Frequency
TCAS
Traffic Collision Avoidance System
VSWR
Voltage Standing-Wave Ratio
11. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BLA1011-300#3
20150901
Product data sheet
-
BLA1011-300_2
Modifications:
•
The format of this document has been redesigned to comply with the new identity guidelines
of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLA1011-300_2
20080205
Product data sheet
-
BLA1011-300_1
BLA1011-300_1
20070403
Product data sheet
-
-
BLA1011-300#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 12
BLA1011-300
Avionics LDMOS transistors
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLA1011-300#3
Product data sheet
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 12
BLA1011-300
Avionics LDMOS transistors
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
13. Contact information
For more information, please visit:
http://www.ampleon.com
BLA1011-300#3
Product data sheet
For sales office addresses, please visit:
http://www.ampleon.com/sales
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
11 of 12
BLA1011-300
Avionics LDMOS transistors
14. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 2
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Application information. . . . . . . . . . . . . . . . . . . 3
Ruggedness in class-AB operation . . . . . . . . . 4
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9
Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contact information. . . . . . . . . . . . . . . . . . . . . 11
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLA1011-300#3