BLC8G27LS-240AV
Power LDMOS transistor
Rev. 5 — 2 December 2016
Product data sheet
1. Product profile
1.1 General description
240 W LDMOS packaged asymmetric Doherty power transistor for base station
applications at frequencies from 2500 MHz to 2700 MHz.
Table 1.
Typical performance
Typical RF performance at Tcase = 25 C in an asymmetrical Doherty demo board. VDS = 28 V;
IDq = 500 mA (main); VGS(amp)peak = 0.5 V, unless otherwise specified.
Test signal
1-carrier W-CDMA
[1]
f
VDS
PL(AV)
Gp
D
ACPR
(MHz)
(V)
(W)
(dB)
(%)
(dBc)
2500 to 2690
28
56
14.5
43
35 [1]
Test signal: 3GPP test model 1; 64 DPCH; PAR = 7.2 dB at 0.01% probability on CCDF per carrier.
1.2 Features and benefits
Excellent ruggedness
High-efficiency
Low thermal resistance providing excellent thermal stability
Designed for broadband operation (2500 MHz to 2700 MHz)
Asymmetric design to achieve optimum efficiency across the band
Lower output capacitance for improved performance in Doherty applications
Designed for low memory effects providing excellent digital pre-distortion capability
Internally matched for ease of use
Integrated ESD protection
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
RF power amplifiers for base stations and multi carrier applications in the 2500 MHz to
2700 MHz frequency range
BLC8G27LS-240AV
Power LDMOS transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
1
drain2 (peak)
2
drain1 (main)
3
gate1 (main)
4
gate2 (peak)
Simplified outline
6
9
2
2
1
6
7
3
[1]
5
source
6
video decoupling (main)
7
n.c.
7
3
4
5
8
4
8
9
1
8
n.c.
9
video decoupling (peak)
[1]
Graphic symbol
aaa-009150
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
Package
BLC8G27LS-240AV
Name
Description
Version
-
plastic earless flanged cavity package; 8 leads
SOT1252-1
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VDS
Min
Max
Unit
drain-source voltage
-
65
V
VGS(amp)main
main amplifier gate-source voltage
0.5
+13
V
VGS(amp)peak
peak amplifier gate-source voltage
0.5
+13
V
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
225
C
[1]
Conditions
[1]
Continuous use at maximum temperature will affect the reliability, for details refer to the online MTF
calculator.
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol Parameter
Rth(j-c)
BLC8G27LS-240AV
Product data sheet
thermal resistance from junction
to case
Conditions
Typ
Unit
VDS = 28 V; IDq = 500 mA (main);
VGS(amp)peak = 0.5 V; Tcase = 80 C;
PL = 56 W
0.3
K/W
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
2 of 15
BLC8G27LS-240AV
Power LDMOS transistor
6. Characteristics
Table 6.
DC characteristics
Tj = 25 C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max Unit
65
-
-
V
Main device
V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID = 1.8 mA
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 180 mA
1.5
1.9
2.3
V
VGSq
gate-source quiescent voltage
VDS = 28 V; ID = 540 mA
1.6
2.1
2.4
V
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
-
2.8
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
-
30
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
280
nA
gfs
forward transconductance
VDS = 10 V; ID = 180 mA
-
1.63 -
S
RDS(on)
drain-source on-state resistance VGS = VGS(th) + 3.75 V;
ID = 6.3 A
-
83
m
135
Peak device
65
-
-
V
VGS(th)
V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID = 2.2 mA
gate-source threshold voltage
VDS = 10 V; ID = 220 mA
1.5
1.9
2.3
V
VGSq
gate-source quiescent voltage
VDS = 28 V; ID = 660 mA
1.6
2.1
2.4
V
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
-
2.8
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
-
40
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
28
nA
gfs
forward transconductance
VDS = 10 V; ID = 220 mA
-
1.94 -
S
RDS(on)
drain-source on-state resistance VGS = VGS(th) + 3.75 V;
ID = 7.7 A
-
68
m
112
Table 7.
RF characteristics
Test signal: 1-carrier W-CDMA; PAR = 7.2 dB at 0.01 % probability on the CCDF;
3GPP test model 1; 1 to 64 DPCH; f1 = 2500 MHz; f2 = 2690 MHz; RF performance at VDS = 28 V;
IDq = 500 mA (main); VGS(amp)peak = 0.5 V; Tcase = 25 C; unless otherwise specified; in an
asymmetrical Doherty production test circuit in 2500 MHz to 2690 MHz.
BLC8G27LS-240AV
Product data sheet
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
PL(AV) = 56 W
12.8
14
-
dB
RLin
input return loss
PL(AV) = 56 W
-
10
6
dB
D
drain efficiency
PL(AV) = 56 W
32
37
-
%
ACPR
adjacent channel power ratio
PL(AV) = 56 W
-
25
20
dBc
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
3 of 15
BLC8G27LS-240AV
Power LDMOS transistor
7. Test information
7.1 Ruggedness in class-AB operation
The BLC8G27LS-240AV is capable of withstanding a load mismatch corresponding to
VSWR = 10 : 1 through all phases under the following conditions: VDS = 28 V;
IDq = 500 mA (main); VGS(amp)peak = VGS - 1 V (VGS: IDq at 750 mA); PL = 200 W (CW);
f = 2500 MHz.
7.2 Impedance information
Table 8.
Typical impedance of main device
Measured load-pull data of main device; IDq = 1000 mA; VDS = 28 V. Typical values unless otherwise
specified.
f
ZS[1]
ZL[1]
PL[2]
D[2]
Gp[2]
(MHz)
()
()
(W)
(%)
(dB)
Maximum power load
2500
2.7 j4.1
1.0 j4.5
197
53.5
13.1
2600
2.7 j5.2
1.0 j4.5
196
53.5
14.1
2700
2.9 j4.3
1.0 j4.5
186
54.3
15.7
Maximum drain efficiency load
2500
2.7 j4.1
1.7 j3.9
159
62.6
15.2
2600
2.7 j5.2
1.5 j3.7
144
61.2
16.5
2700
2.9 j4.3
1.4 j4.1
149
58.5
17.2
[1]
ZS and ZL defined in Figure 1.
[2]
at 3 dB gain compression.
Table 9.
Typical impedance of peak device
Measured load-pull data of peak device; IDq = 1230 mA; VDS = 28 V. Typical values unless otherwise
specified.
f
ZS[1]
ZL[1]
PL[2]
D[2]
Gp[2]
(MHz)
()
()
(W)
(%)
(dB)
256
53.3
13.7
Maximum power load
2500
2.5 j5.6
2.1 j4.9
2600
3.9 j5.1
2.1 j4.9
254
53.8
14.4
2700
3.4 j4.2
2.6 j5.1
240
53.3
15.9
187
62.1
16.0
Maximum drain efficiency load
BLC8G27LS-240AV
Product data sheet
2500
2.5 j5.6
2.0 j2.9
2600
3.9 j5.1
1.8 j3.1
177
60.4
16.9
2700
3.4 j4.2
1.8 j3.5
174
59.5
18.1
[1]
ZS and ZL defined in Figure 1.
[2]
at 3 dB gain compression.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
4 of 15
BLC8G27LS-240AV
Power LDMOS transistor
drain
ZL
gate
ZS
001aaf059
Fig 1.
Definition of transistor impedance
7.3 VBW in Doherty operation
The BLC8G27LS-240AV shows 110 MHz (typical) video band-width in Doherty demo
board in 2600 MHz at VDS = 28 V; IDq = 500 mA and VGS(amp)peak = 0.5 V.
7.4 Test circuit
50 mm
50 mm
C1
C21
C2
C8
C9
C10
C12
C11
R2
C13
C3
C14
80 mm
C4
C15
R3
C5
R1
C16 C18
C6
C19
C20
C17
C22
C7
aaa-015170
Printed-Circuit Board (PCB): Rogers RO4350B with a thickness of 0.508 mm.
See Table 10 for a list of components.
Fig 2.
BLC8G27LS-240AV
Product data sheet
Component layout
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
5 of 15
BLC8G27LS-240AV
Power LDMOS transistor
Table 10. List of components
For test circuit see Figure 2.
Component
Description
Value
Remarks
C1, C7
multilayer ceramic chip capacitor
0.1 F, 50 V
Murata
C2, C3, C4, C5, C6, C8, C9,
C13, C14, C15, C19, C20
multilayer ceramic chip capacitor
22 pF
ATC 600F
Murata
C10, C11, C12, C16, C17, C18 multilayer ceramic chip capacitor
4.7 F, 50 V
C21, C22
electrolytic capacitor
2200 F, 63 V
R1
resistor
50
R2, R3
chip resistor
9.1
SMD 0805
7.5 Graphical data
7.5.1 CW
aaa-015171
18
80
Gp
(dB)
ηD
(%)
(1)
(2)
(3)
16
60
ηD
14
40
(1)
(2)
(3)
12
20
Gp
10
0
50
100
150
200
250
300
PL (W)
0
350
VDS = 28 V; IDq = 500 mA (main); VGS(amp)peak = 0.5 V.
(1) f = 2500 MHz
(2) f = 2600 MHz
(3) f = 2690 MHz
Fig 3.
BLC8G27LS-240AV
Product data sheet
Power gain and drain efficiency as function of output power; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
6 of 15
BLC8G27LS-240AV
Power LDMOS transistor
7.5.2 CW pulsed
aaa-015172
18
80
Gp
(dB)
ηD
(%)
(1)
(2)
(3)
16
60
ηD
14
40
(1)
(2)
(3)
12
20
Gp
10
0
50
100
150
200
250
300 350
PL (W)
0
400
VDS = 28 V; IDq = 500 mA (main); VGS(amp)peak = 0.5 V; tp = 100 s; = 10 %
(1) f = 2500 MHz
(2) f = 2600 MHz
(3) f = 2690 MHz
Fig 4.
Power gain and drain efficiency as function of output power; typical values
7.5.3 1-Carrier W-CDMA
aaa-015173
17
50
ηD
Gp
(dB)
(1)
(2)
(3)
15
(1)
(2)
(3)
13
ηD
(%)
40
Gp
aaa-015174
-20
ACPR5M
(dBc)
-25
(1)
(2)
-30
30
(3)
-35
11
20
-40
9
10
7
0
20
40
60
80
100
120
PL (W)
-45
0
140
-50
0
VDS = 28 V; IDq = 500 mA (main); VGS(amp)peak = 0.5 V.
20
40
(1) f = 2500 MHz
(2) f = 2600 MHz
(2) f = 2600 MHz
(3) f = 2690 MHz
Product data sheet
100
120
PL (W)
140
(3) f = 2690 MHz
Power gain and drain efficiency as function of
output power; typical values
BLC8G27LS-240AV
80
VDS = 28 V; IDq = 500 mA (main); VGS(amp)peak = 0.5 V.
(1) f = 2500 MHz
Fig 5.
60
Fig 6.
Adjacent channel power ratio (5 MHz) as a
function of output power; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
7 of 15
BLC8G27LS-240AV
Power LDMOS transistor
aaa-015175
10
PAR
(dBc)
8
6
(1)
(2)
(3)
4
2
0
0
20
40
60
80
100
120
PL (W)
140
VDS = 28 V; IDq = 500 mA (main); VGS(amp)peak = 0.5 V.
(1) f = 2500 MHz
(2) f = 2600 MHz
(3) f = 2690 MHz
Fig 7.
Peak-to-average ratio as a function of output power; typical values
7.5.4 2-Carrier W-CDMA
aaa-015176
17
Gp
(dB)
(1)
(2)
(3)
16
60
ηD
(%)
ηD
15
aaa-015177
-20
ACPR5M
(dBc)
50
(1)
-24
(2)
40
-28
14
(3)
30
(1)
(2)
(3)
13
Gp
-32
20
12
-36
10
11
0
20
40
60
80
100
120
PL (W)
0
140
-40
0
VDS = 28 V; IDq = 500 mA (main); VGS(amp)peak = 0.5 V.
20
40
(1) f = 2500 MHz
(2) f = 2600 MHz
(2) f = 2600 MHz
(3) f = 2690 MHz
(3) f = 2690 MHz
Power gain and drain efficiency as function of
output power; typical values
BLC8G27LS-240AV
Product data sheet
80
100
120
PL (W)
140
VDS = 28 V; IDq = 500 mA (main); VGS(amp)peak = 0.5 V.
(1) f = 2500 MHz
Fig 8.
60
Fig 9.
Adjacent channel power ratio (5 MHz) as a
function of output power; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
8 of 15
BLC8G27LS-240AV
Power LDMOS transistor
7.5.5 2-Tone VBW
aaa-015178
-10
IMD
(dBc)
(1)
(2)
IMD3
-30
(1)
(2)
IMD5
-50
IMD7
(1)
(2)
-70
-90
1
10
102
Carrier Spacing (MHz)
103
VDS = 28 V; IDq = 500 mA (main); VGS(amp)peak = 0.5 V.
(1) IMD low
(2) IMD high
Fig 10. VBW capability in Doherty demo board
BLC8G27LS-240AV
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
9 of 15
BLC8G27LS-240AV
Power LDMOS transistor
8. Package outline
Air cavity plastic earless flanged package; 8 leads
SOT1252-1
D
F
A
5
w1
D1
v
A
U1
6
H
B
c
B
2
1
y
9
U2
E1
E
A
7
3
4
8
Q
e
w2
b1
b
B
e1
0
5
10 mm
y
scale
0.10
Dimensions
Unit
mm
A
max 4.65
nom
min 4.18
b
b1
c
1.37
11.78
0.20
D
D1
31.44 31.34
E
E1
9.60
9.50
e
F
H
Q(1)
1.83
19.71
2.33
32.33 10.23
1.63
19.51
2.13
32.13 10.03
e1
U1
v
w1
w2
0.50
0.50
0.50
13.72 29.46
1.17
11.58
0.10
31.04 31.14
9.20
9.30
Note
1. Dimension Q is measured 0.1 mm away from the flange.
2. Ringframe and/or ringframe glue shall not overhang at the side of the flange.
Outline
version
U2
References
IEC
JEDEC
JEITA
sot1252-1_po
European
projection
Issue date
15-06-09
16-10-04
SOT1252-1
Fig 11. Package outline SOT1252-1
BLC8G27LS-240AV
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
10 of 15
BLC8G27LS-240AV
Power LDMOS transistor
9. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
Table 11.
ESD sensitivity
ESD model
Class
Charged Device Model (CDM); According to ANSI/ESDA/JEDEC standard JS-002
C2A [1]
Human Body Model (HBM); According to ANSI/ESDA/JEDEC standard JS-001
2 [2]
[1]
CDM classification C2A is granted to any part that passes after exposure to an ESD pulse of 500 V, but fails
after exposure to an ESD pulse of 750 V.
[2]
HBM classification 2 is granted to any part that passes after exposure to an ESD pulse of 2000 V, but fails
after exposure to an ESD pulse of 4000 V.
10. Abbreviations
Table 12.
BLC8G27LS-240AV
Product data sheet
Abbreviations
Acronym
Description
3GPP
3rd Generation Partnership Project
CCDF
Complementary Cumulative Distribution Function
CW
Continuous Wave
DPCH
Dedicated Physical CHannel
ESD
ElectroStatic Discharge
LDMOS
Laterally Diffused Metal-Oxide Semiconductor
MTF
Median Time to Failure
PAR
Peak-to-Average Ratio
SMD
Surface Mounted Device
VBW
Video Bandwidth
VSWR
Voltage Standing Wave Ratio
W-CDMA
Wideband Code Division Multiple Access
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
11 of 15
BLC8G27LS-240AV
Power LDMOS transistor
11. Revision history
Table 13.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BLC8G27LS-240AV v.5
20161202
Product data sheet
-
BLC8G27LS-240AV v.4
Modifications:
•
•
Figure 11 on page 10: updated package outline drawing SOT1252-1
Section 9 on page 11: updated Handling information
BLC8G27LS-240AV v.4
20150901
Product data sheet
-
BLC8G27LS-240AV v.3
BLC8G27LS-240AV v.3
20150728
Product data sheet
-
BLC8G27LS-240AV v.2
BLC8G27LS-240AV v.2
20150603
Product data sheet
-
BLC8G27LS-240AV v.1
BLC8G27LS-240AV v.1
20131104
Objective data sheet
-
-
BLC8G27LS-240AV
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
12 of 15
BLC8G27LS-240AV
Power LDMOS transistor
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLC8G27LS-240AV
Product data sheet
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
13 of 15
BLC8G27LS-240AV
Power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’s warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’s specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’s standard warranty and Ampleon’s product
specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
13. Contact information
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
BLC8G27LS-240AV
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 2 December 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
14 of 15
BLC8G27LS-240AV
Power LDMOS transistor
14. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.3
7.4
7.5
7.5.1
7.5.2
7.5.3
7.5.4
7.5.5
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 2
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 4
Ruggedness in class-AB operation . . . . . . . . . 4
Impedance information . . . . . . . . . . . . . . . . . . . 4
VBW in Doherty operation . . . . . . . . . . . . . . . . 5
Test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 6
CW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CW pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1-Carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 7
2-Carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 8
2-Tone VBW . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Handling information. . . . . . . . . . . . . . . . . . . . 11
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Contact information. . . . . . . . . . . . . . . . . . . . . 14
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon Netherlands B.V. 2016.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 2 December 2016
Document identifier: BLC8G27LS-240AV