BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
Rev. 3 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
50 W LDMOS power transistor for base station applications at frequencies from
3400 MHz to 3800 MHz.
Table 1.
Typical performance
Typical RF performance at Tcase = 25 C in a class-AB production test circuit.
VDS (V) PL(AV) (W) PL(M)[1] (W) Gp (dB) D (%) ACPR885k (dBc) ACPR1980k (dBc)
Mode of operation f (MHz)
1-carrier N-CDMA[2] 3400 to 3600 28
9
70
14
23
49[3]
64[3]
[1]
PL(M) stands for peak output power.
[2]
Single carrier N-CDMA with pilot, paging, sync and 6 traffic channels (Walsh codes 8 - 13). PAR = 9.7 dB at 0.01 % probability on the
CCDF. Channel bandwidth is 1.23 MHz.
[3]
Measured within 30 kHz bandwidth.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features and benefits
Typical 1-carrier N-CDMA performance (Single carrier N-CDMA with pilot, paging,
synchronization and 6 traffic channels [Walsh codes 8 - 13]. PAR = 9.7 dB at 0.01 %
probability on the CCDF. Channel bandwidth is 1.23 MHz) at a frequency of
3400 MHz, 3500 MHz and 3600 MHz, a supply voltage of 28 V, an IDq of 450 mA, a
power gain of 14 dB, a drain efficiency of 23 % and a peak output power of 70 W:
Qualified up to a maximum VDS operation of 32 V
Suitable for operation in the 3.4 GHz to 3.8 GHz frequency range
Integrated ESD protection
Excellent ruggedness
High efficiency
Excellent thermal stability
Designed for broadband operation
Internally matched for ease of use
Low gold plating thickness on leads
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
1.3 Applications
RF power amplifiers for base stations and multicarrier applications in the
3400 MHz to 3800 MHz frequency range
2. Pinning information
Table 2.
Pinning
Pin
Description
Simplified outline
Graphic symbol
BLF6G38-50 (SOT502A)
1
drain
2
gate
3
source
1
1
[1]
3
2
2
3
sym112
BLF6G38LS-50 (SOT502B)
1
drain
2
gate
3
source
1
1
[1]
3
2
2
3
sym112
[1]
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
BLF6G38-50
-
flanged ceramic package; 2 mounting holes; 2 leads
SOT502A
BLF6G38LS-50
-
earless flanged ceramic package; 2 leads
SOT502B
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
VDS
drain-source voltage
VGS
gate-source voltage
0.5
+13
V
ID
drain current
-
16.5
A
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
200
C
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
Min
Max
Unit
-
65
V
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Conditions
Rth(j-case)
thermal resistance from Tcase = 80 C;
junction to case
PL = 50 W
Type
Typ
Unit
BLF6G38-50
0.9
-
BLF6G38LS-50
0.7
-
Min
Typ
Max
Unit
65
-
-
V
6. Characteristics
Table 6.
Characteristics
Tj = 25 C per section; unless otherwise specified.
Symbol Parameter
Conditions
V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID = 0.4 mA
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 80 mA
1.4
2
2.4
V
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
-
2.8
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
11.8
16.4
-
A
IGSS
gate leakage current
VGS = +11 V; VDS = 0 V
-
-
280
nA
gfs
forward transconductance
VDS = 10 V; ID = 2.8 A
-
5.6
-
S
RDS(on)
drain-source on-state resistance VGS = VGS(th) + 3.75 V;
ID = 2.8 A
-
0.18
0.29
Crs
feedback capacitance
-
1.17
-
pF
VGS = 0 V; VDS = 28 V;
f = 1 MHz
7. Application information
Table 7.
Application information
Mode of operation: 1-carrier N-CDMA; Single carrier N-CDMA with pilot, paging, sync and 6 traffic
channels (Walsh codes 8 - 13). PAR = 9.7 dB at 0.01 % probability on the CCDF; Channel
bandwidth is 1.23 MHz; f1 = 3400 MHz; f2 = 3500 MHz; f3 = 3600 MHz; RF performance at
VDS = 28 V; IDq = 450 mA; Tcase = 25 C; unless otherwise specified, in a class-AB production
circuit.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
PL(M)
peak output power
PL(AV) = 9 W
65
70
-
W
Gp
power gain
PL(AV) = 9 W
12.5 14
-
dB
RLin
input return loss
PL(AV) = 9 W
-
10
-
dB
D
drain efficiency
PL(AV) = 9 W
20
23
-
%
PL(AV) = 9 W
[1]
46
49
-
dBc
ACPR1980k adjacent channel power ratio (1980 kHz) PL(AV) = 9 W
[1]
62
64
-
dBc
ACPR885k
[1]
adjacent channel power ratio (885 kHz)
Measured within 30 kHz bandwidth.
7.1 Ruggedness in class-AB operation
The BLF6G38-50 and BLF6G38LS-50 are capable of withstanding a load mismatch
corresponding to VSWR = 10 : 1 through all phases under the following conditions:
VDS = 28 V; IDq = 450 mA; PL = PL(1dB); f = 3600 MHz.
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
7.2 Ampleon WiMAX signal
7.2.1 WiMAX signal description
Frame duration = 5 ms; bandwidth = 10 MHz; sequency = 1 frame;
frequency band = WCS; sampling rate = 11.2 MHz; n = 8 / 7; G = Tg / Tb = 1 / 8;
FFT = 1024; zone type = PUSC; = 97.7 %; number of symbols = 46;
number of subchannels = 30; PAR = 9.5 dB.
Preamble: 1 symbol 30 subchannels; PL = PL(nom) + 3.86 dB.
Table 8.
Frame structure
Frame contents
Modulation technique
Data length
Zone 0
FCH
2 symbols 4 subchannels
QPSK1/2
3 bit
Zone 0
data
2 symbols 26 subchannels
64QAM3/4
692 bit
Zone 0
data
44 symbols 30 subchannels
64QAM3/4
10000 bit
7.2.2 Graphs
001aah395
5
001aah396
15
Gp
Gp
(dB)
EVM
(%)
30
ηD
(%)
4
13
24
3
11
18
2
9
12
1
7
6
ηD
5
0
0
4
8
12
0
PL(AV) (W)
0
12
8
PL(AV) (W)
VDS = 28 V; IDq = 450 mA; f = 3500 MHz.
Fig 1.
4
VDS = 28 V; IDq = 450 mA; f = 3500 MHz.
EVM as a function of average load power;
typical values
Fig 2.
Power gain and drain efficiency as functions
of average load power; typical values
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
001aah397
−20
ACPR
(dBc)
−30
(1)
−40
−50
(2)
(3)
−60
−70
0
4
8
12
PL(AV) (W)
VDS = 28 V; IDq = 450 mA; f = 3500 MHz.
(1)
f = 10 MHz
(2)
f = 20 MHz
(3)
f = 30 MHz
Fig 3.
Adjacent channel power ratio as a function of average load power; typical values
7.3 Single carrier N-CDMA broadband performance at 9 W average
7.3.1 Graphs
001aah398
16
Gp
(dB)
15
26
ηD
(%)
25
Gp
24
14
13
001aah399
−40
ACPR
(dBc)
(2)
−50
ACPR1500k
23
ηD
ACPR885k
(1)
(1)
(2)
22
12
−60
ACPR1980k
(1)
11
21
10
3400
3450
3500
20
3600
3550
(2)
−70
3400
3450
3500
f (MHz)
3550
3600
f (MHz)
VDS = 28 V; IDq = 450 mA; Single Carrier N-CDMA;
PAR = 9.7 dB at 0.01 % probability; IBW = 30 kHz.
VDS = 28 V; IDq = 450 mA; Single Carrier N-CDMA;
PAR = 9.7 dB at 0.01 % probability; IBW = 30 kHz.
(1) Low frequency component
(2) High frequency component
Fig 4.
Power gain and drain efficiency as functions
of frequency; typical values
Fig 5.
Adjacent channel power ratio as a function of
frequency; typical values
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
001aah400
18
40
ηD
(%)
Gp
(dB)
30
16
001aah401
−30
ACPR
(dBc)
−40
−50
Gp
20
14
−60
12
(1)
10
ηD
(1)
(2)
ACPR885k
−70
ACPR1500k
(2)
(1)
(2)
ACPR1980k
10
10−1
0
1
102
10
−80
10−1
1
102
10
PL (W)
PL (W)
VDS = 28 V; IDq = 450 mA; f = 3500 MHz; Single Carrier
N-CDMA; PAR = 9.7 dB at 0.01 % probability; Channel
Bandwidth = 1.23 MHz; IBW = 30 kHz.
VDS = 28 V; IDq = 450 mA; f = 3500 MHz; Single Carrier
N-CDMA; PAR = 9.7 dB at 0.01 % probability; Channel
Bandwidth = 1.23 MHz; IBW = 30 kHz.
(1) Low frequency component
(2) High frequency component
Fig 6.
Power gain and drain efficiency as functions
of load power; typical values
Fig 7.
001aah402
16
Gp
(dB)
Adjacent channel power ratio as a function of
load power; typical values
001aah403
1.5
Pi
(W)
15
1.0
(2)
(3)
(2)
(1)
(1)
14
(3)
0.5
13
12
10−1
1
0
10−1
102
10
VDS = 28 V; IDq = 450 mA; Single Carrier N-CDMA;
PAR = 9.7 dB at 0.01 % probability; Channel Bandwidth
= 1.23 MHz; IBW = 30 kHz.
102
10
VDS = 28 V; IDq = 450 mA; Single Carrier N-CDMA;
PAR = 9.7 dB at 0.01 % probability; Channel Bandwidth
= 1.23 MHz; IBW = 30 kHz.
(1) f = 3400 MHz
(1) f = 3400 MHz
(2) f = 3500 MHz
(2) f = 3500 MHz
(3) f = 3600 MHz
(3) f = 3600 MHz
Fig 8.
1
PL (W)
PL (W)
Power gain as a function of load power; typical
values
Fig 9.
Input power as a function of load power;
typical values
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
8. Test information
C8
C10
C9
C4
R2
C7
L1
C6
C3
R1
C1
C2
C5
BLF6G38-50
BLF6G38-50
INPUT-REV 1A
30RF35
OUTPUT-REV 1A
30RF35
001aah404
Striplines are on a double copper-clad Taconic RF35 Printed-Circuit Board (PCB) with r = 3.5 and thickness = 0.76 mm.
See Table 9 for list of components.
Fig 10. Component layout for 3400 MHz to 3600 MHz test circuit
Table 9.
List of components
For test circuit, see Figure 10.
Component
Description
Value
Remarks
C1, C4, C5, C6
multilayer ceramic chip capacitor
10 pF
[1]
C2
multilayer ceramic chip capacitor
0.7 pF
[1]
C3, C8, C9
multilayer ceramic chip capacitor
100 nF
[2]
C7
multilayer ceramic chip capacitor
10 F; 50 V
[3]
C10
electrolytic capacitor
470 F; 63 V
R1, R2
SMD resistor
9.1
L1
ferrite SMD bead
-
Ferroxcube BDS 3/3/4.6-4S2 or equivalent
[1]
American Technical Ceramics type 100A or capacitor of same quality.
[2]
Vishay VJ1206Y104KXB or capacitor of same quality.
[3]
TDK C5750X7R1H106M or capacitor of same quality.
Table 10.
Measured test circuit impedances
f
Zi
Zo
(GHz)
()
()
3.4
5.48 j9.38
12.42 j4.58
3.5
5.39 j9.43
10.41 j5.31
3.6
5.55 j9.15
14.31 j7.04
3.8
9.60 j12.48
17.70 j11.57
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
7 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
9. Package outline
Flanged ceramic package; 2 mounting holes; 2 leads
SOT502A
D
A
F
3
D1
U1
B
q
c
C
1
H
L
E1
p
U2
E
w1 M A M B M
A
2
w2 M C M
b
0
5
Q
10 mm
scale
DIMENSIONS (millimetre dimensions are derived from the original inch dimensions)
UNIT
A
b
c
mm
4.72
3.43
12.83
12.57
0.15
0.08
inches
0.186
0.135
0.505 0.006
0.495 0.003
OUTLINE
VERSION
D
E
E1
F
H
L
p
Q
q
U1
U2
w1
w2
20.02 19.96
19.61 19.66
9.50
9.30
9.53
9.25
1.14
0.89
19.94
18.92
5.33
4.32
3.38
3.12
1.70
1.45
27.94
34.16
33.91
9.91
9.65
0.25
0.51
0.788 0.786
0.772 0.774
0.374 0.375
0.366 0.364
0.067
1.100
0.057
1.345
1.335
0.390
0.380
0.01
0.02
D1
0.045 0.785
0.035 0.745
0.210 0.133
0.170 0.123
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
03-01-10
12-05-02
SOT502A
Fig 11. Package outline SOT502A
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
Earless flanged ceramic package; 2 leads
SOT502B
D
A
F
3
D
D1
c
U1
1
L
H
E1
U2
E
2
w2 M D M
b
0
5
Q
10 mm
scale
DIMENSIONS (millimetre dimensions are derived from the original inch dimensions)
UNIT
A
b
c
mm
4.72
3.43
12.83
12.57
0.15
0.08
inches
0.186
0.135
0.505 0.006
0.495 0.003
OUTLINE
VERSION
D
E
E1
F
H
L
Q
U1
U2
w2
20.02 19.96
19.61 19.66
9.50
9.30
9.53
9.25
1.14
0.89
19.94
18.92
5.33
4.32
1.70
1.45
20.70
20.45
9.91
9.65
0.25
0.788 0.786
0.772 0.774
0.374 0.375
0.366 0.364
0.045 0.785
0.035 0.745
0.210
0.170
0.067 0.815
0.057 0.805
D1
REFERENCES
IEC
JEDEC
JEITA
0.390
0.010
0.380
EUROPEAN
PROJECTION
ISSUE DATE
07-05-09
12-05-02
SOT502B
Fig 12. Package outline SOT502B
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
10. Abbreviations
Table 11.
Abbreviations
Acronym
Description
CCDF
Complementary Cumulative Distribution Function
CW
Continuous Wave
EVM
Error Vector Magnitude
FCH
Frame Control Header
FFT
Fast Fourier Transform
IBW
Instantaneous BandWidth
LDMOS
Laterally Diffused Metal-Oxide Semiconductor
LDMOST
Laterally Diffused Metal-Oxide Semiconductor Transistor
N-CDMA
Narrowband Code Division Multiple Access
PAR
Peak-to-Average power Ratio
PUSC
Partial Usage of SubChannels
RF
Radio Frequency
SMD
Surface Mounted Device
VSWR
Voltage Standing-Wave Ratio
WCS
Wireless Communications Service
WiMAX
Worldwide Interoperability for Microwave Access
11. Revision history
Table 12.
Revision history
Document ID
Release date
Data sheet status
Change
notice
Supersedes
BLF6G38-50_BLF6G38LS-50#3
20150901
Product data sheet
-
BLF6G38-50_BLF6G38LS-50#2
Modifications:
•
The format of this document has been redesigned to comply with the new identity
guidelines of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLF6G38-50_BLF6G38LS-50#2
20100601
Product data sheet
-
BLF6G38-50_BLF6G38LS-50#1
BLF6G38-50_BLF6G38LS-50#1
20080212
Preliminary data
sheet
-
-
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
11 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13. Contact information
For more information, please visit:
http://www.ampleon.com
For sales office addresses, please visit:
http://www.ampleon.com/sales
BLF6G38-50_BLF6G38LS-50#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
12 of 13
BLF6G38-50; BLF6G38LS-50
WiMAX power LDMOS transistor
14. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.2.1
7.2.2
7.3
7.3.1
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Application information. . . . . . . . . . . . . . . . . . . 3
Ruggedness in class-AB operation . . . . . . . . . 3
Ampleon WiMAX signal . . . . . . . . . . . . . . . . . . 4
WiMAX signal description . . . . . . . . . . . . . . . . . 4
Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Single carrier N-CDMA broadband
performance at 9 W average . . . . . . . . . . . . . . 5
Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10
Legal information. . . . . . . . . . . . . . . . . . . . . . . 11
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Contact information. . . . . . . . . . . . . . . . . . . . . 12
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLF6G38-50_BLF6G38LS-50#3