BPS8B21FLD000L9LF

DIN IDC Cable Connectors and Cable Assemblies DESIGNED IN ACCORDANCE WITH DIN 41612 DIN IDC cable connectors are available in 4 connector sizes as 96, 42, 21 and 9 positions. Available in wire sizes 30AWG to 24AWG, their unique insulation displacement design grants the lowest installed cost for users. Standard accessories are also offered to make up a fully modular system. This robust and standardized solution is widely used in Industrial & Instrumentation markets. The customized modules enhance connector suitability and flexibility. §§Fully modular system §§Customized modules §§A wide variety of standard accessories §§Suitable for solid and stranded wires TARGET MARKETS FEATURES BENEFITS §§4 contact point IDC configuration §§Provides excellent electrical and mechanical properties §§Fully modular system §§Flexible, robust and standardized solution §§Customized modules §§Enhances connector suitability and flexibility §§A wide variety of standard accessories such as latches, §§Improved adaptability and polarization hoods/covers, and keys §§Allows strain-relief crimping, repair, and visual inspection §§Flexible and easy wire installation after insertion, to be performed on individual wires www.amphenol-icc.com Amphenol Information Communications and Commercial Products DIN IDC Cable Connectors and Cable Assemblies TECHNICAL INFORMATION MATERIAL SPECIFICATIONS §§ Body Material: Glass reinforced thermoplastic §§ DIN 41612 (UL94V-0) §§ Contact Material: Phosphor bronze §§ Male & Female contacts (DIN 41612 compliant) - Active contact areas selectively plated - Gold over Nickel or GXT™ over Nickel on mating surface - Tin over Nickel on solder termination §§ Plating: Lead-free version MECHANICAL PERFORMANCE §§ Insertion Force: 1N max. per contact §§ Withdrawal Force: 0.2N min. per contact ELECTRICAL PERFORMANCE §§ Contact Resistance: 15mΩ max. initial, 5mΩ max. rise of initial value after test §§ Current Rating: 1.5A @ 25°C, 1A @ 70°C §§ Voltage Rating: 250V AC (rms) §§ Dielectric Withstanding Voltage: 1000 VAC (rms) ENVIRONMENTAL §§ Operating Temperature: -40°C to +125°C (Depending on the cable, maximum temperature can be lower) §§ IEC 603-2 PACKAGING §§ Tray and carton ARPPOVALS AND CERTIFICATIONS §§ UL/CSA pending TARGET MARKETS/APPLICATIONS Switches Router Enterprise Transmission Wireless and Wired Access Server Personal Computing Peripheral Device Lighting Process Control Control Panel Onboard Electronics Traffic Signalling Energy Transmission Distribution Control Medical §§ For standard PVC insulated cable: 105°C max. www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice. DIN IDC Cable Connectors and Cable Assemblies PART NUMBERS DIN IDC 3x32 CABLE CONNECTOR No. of Contacts 96 (2-piece) 64 (1-piece) Rows Loaded a, b, c Cover Set Connector + Standard Cover Set Wire Gauge Connector AWG 30-28 BPS8B96FLD000xxLF AWG 26-24 BPS8B96FLD200xxLF AWG 30-28 BPS8B96ACD000xxLF BPS8B96ACD0C0XXLF AWG 26-24 BPS8B96ACD200xxLF BPS8B96ACD2C0xxLF BPS8B96FLD0C0xxLF BPS8B96FLD2C0xxLF BPBS8B96CAP1LF a, c DIN IDC 2 x (3x7) CABLE CONNECTOR No. of Contacts 42 (2-piece) 28 (1-piece) Rows Loaded a, b, c Cover Set Connector + Standard Cover Set Wire Gauge Connector AWG 30-28 (2x) BPS8B21FLD000xxLF AWG 26-24 (2x) BPS8B21FLD200xxLF AWG 30-28 (2x) BPS8B21ACD000xxLF BPS8B42ACD0C0XXLF AWG 26-24 (2x) BPS8B21ACD200xxLF BPS8B42ACD2C0xxLF BPS8B42FLD0C0xxLF BPS8B42FLD2C0xxLF BPBS8B42P3LF a, c DIN IDC 3x7 CABLE CONNECTOR No. of Contacts Rows Loaded 21 (2-piece) a, b, c 14 (1-piece) Cover Set Connector + Standard Cover Set Wire Gauge Connector AWG 30-28 BPS8B21FLD000xxLF AWG 26-24 BPS8B21FLD200xxLF AWG 30-28 BPS8B21ACD000xxLF BPS8B21ACD0C0XXLF AWG 26-24 BPS8B21ACD200xxLF BPS8B21ACD2C0xxLF BPS8B21FLD0C0xxLF BPS8B21FLD2C0xxLF BPBS8B21P3LF a, c DIN IDC 3x3 CABLE CONNECTOR No. of Contacts 9 (2-piece) 6 (1-piece) Rows Loaded a, b, c Cover Set Connector + Standard Cover Set Wire Gauge Connector AWG 30-28 BPS8B09FLD000xxLF AWG 26-24 BPS8B09FLD200xxLF AWG 30-28 BPS8B09ACD000xxLF BPS8B09ACD0C0XXLF AWG 26-24 BPS8B09ACD200xxLF BPS8B09ACD2C0xxLF BPS8B21FLD0C0xxLF BPS8B09FLD2C0xxLF BPBS8B09P3LF a, c Notes §§ DIN 41612 class III: replace xx by Z0 in part number §§ DIN 41612 class II: replace xx by Z1 in part number §§ DIN 41612 class I: replace xx by E9 in part number *Note: In case of obsolescence, please contact Amphenol ICC for the replacement part numbers www.amphenol-icc.com Disclaimer Please note that the above information is subject to change without notice. BPLDINIDCCABLE0319EA4 Performance class: