Amphenol
Amphenol-Tuchel Electronics GmbH
eco|matem
Circular Connectors
www.industrial-amphenol.com
Note from the CEO
Ladies and Gentlemen,
For over 75 years Amphenol has enjoyed success as the interconnection technology
provider of choice to industry-leading companies around the world. One of our key strategic areas of focus has been and is the Industrial market. Our organization works with
leading manufacturers across a wide range of applications - including Energy Generation
&Distribution,Transportation,HeavyEquipment,FactoryAutomation,WirelessOutdoor,
ChipCard Readers - enabling smarter, faster and better technologies to connect products to customer solutions.
The Industrial market footprint of Amphenol covers over facilities in more than 12
different European countries and more than 30 countries worldwide. Our successful
expansion into new regions as well as new industrial applications is a direct reflection of
ouragile,entrepreneurialmanagementteamandourunwaveringcommitmenttoexecute Amphenol‘s strategies for the benefit of our customers, shareholders and employees.
Thank you for partnering with Amphenol. Our entire organization is at your service.
R. Adam Norwitt
President and CEO, Amphenol Corporation
2
eco|matem
Make use of the best
Use our global resources
“Think global, act local!”Independently from where you are in Europe, we offer
you our global expertise and great variety of products and technologies. And in
comfort with your personal contact. Our numerous European offices are your
access to our global resources.
OUR OFFICES IN EUROPE AND WORLDWIDE
FRANCE
CHINA
AUSTRALIA
SOUTH AFRICA
GERMANY
KOREA
MEXICO
INDIA
UNITED KINGDOM
TAIWAN
USA
ITALY
3
eco|matem
SECURITY, RELIABILITY AND COMFORTABLE SERVICE FROM ONE SOURCE.
4
More time for important things:
benefit from our service and diversity
Enjoy security, reliability and comfortable service from one source.
INDUSTRIAL@AMPHENOL offers one of the most individual and most diversified service
programmes in the market – exclusively for industrial customers. Access all possibilities of
the Amphenol group through your personal expert adviser.
WIDE PRODUCT RANGE
EXCLUSIVENESS AND FLEXIBILITY
Take advantage of a choice of Amphenol products. Our broad
product portfolio offers individual solutions from more than 85
member companies in the global Amphenol group.
One face to the customer: every inquiry is handled on an individual
service level by your personal key account service partner. This
ensures maximum transparency and best-in-class flexibility in the
whole process.
QUALITY
Interconnect systems need reliability, speed and flawless data
transmission. We continuously test and guarantee the required
standard in our products – and also in our personal services.
Your project requires an individual solution that is not available offthe-shelf? As your think tank and discussion partner we provide
engineering support and solution-oriented development for your
tailor-made Amphenol product.
SPEED AND AVAILABILITY
INDIVIDUAL SOLUTIONS
GLOBAL KEY ACCOUNT SERVICE
Smart and intelligent processes are the secret behind our service
Our key account service is your individual entrance to global
programme. Flexible planning and distribution, perfect logistics and know-how, products and services. More than 85 Amphenol
highest availability are our key factors for best customer service.
companies around the world offer an extensive range of
technologies and products. We offer access to our worldwide
resources through one individual contact person.
5
6
eco|matem
Content
Content
Seite
Brief Information
8
General Information
9
eco|mate Standard
10
eco|mate High Voltage
14
eco|mate Special Types
17
Crimp contacts
20
Accessories
21
Tools
22
Protective covers
23
Mounting Instructions
24
Technical Information
25
Remarks / Safety Classification
28
Summary of Part Numbers
29
7
eco|matem
Brief Information
Approvals, Testhouse
Characteristics
Approval Numbers
VDE
3+PE, 400 V, 16 A
6+PE, 250 V, 10 A (solder version)
6+PE, 250 V, 13 A (crimp version)
56 79 ÜG
SEV
3+PE, 400 V, 16 A
6+PE, 250 V, 10 A (solder version)
6+PE, 250 V, 13 A (crimp version)
UL 1)
3+PE, 400 V, 16A
6+PE, 250 V, 13A
3+PE, 600 V, 13 A at AWG 16 (High Voltage)
3+PE, 600 V, 5 A at AWG 26 (High Voltage)
6+PE, 600 V, 13 A at AWG 16 (High Voltage)
6+PE, 600 V, 5 A at AWG 26 (High Voltage)
E 63093
CSA
3+PE, 250 V, 12 A
6+PE, 250 V, 8 A
3+PE, 600 V, 10.5 A at AWG 16 (High Voltage)
6+PE, 600 V, 10.5 A at AWG 16 (High Voltage)
48932
In general approvals refer to versions of the connector series. Test report upon request.
8
1)
Please refer to „conditions of acceptability“
eco|matem
General Information
General Remarks
In design and conception
the program meets the high
requirements for applications in industrial technology. Easy operation,
reduced dimensions and a more robust design are only a few of
the features of the series.
The connector’s main area of application is in the fields of plant
construction and machine building. The connector is used for
measuring and controlling applications as well as for power supply.
technology. The series is comprised of a large selection of housings
and shapes and offers models with screw, solder and crimp
termination.
Features
• Circular Connectors with 3+PE and 6+PE contacts
• Protection class IP 65/67 in mated condition in accordance with
• Housing components made from premium molding material
DIN EN 60526
• Cable housing straight or angled
• Clamping ring or internal strain relief
Advantages
• Quick and easy assembly
• Screwed cable gland with clamping ring
• Strain relief and mounted gasket all in one component
• Cable housing, straight or angled, for the cable diameter 6 - 12.5 mm
• Robust thread for the screwed cable gland
• Ergonomically designed product range for safe handling
• Pre-loaded ground contact
• Fastening for the protective covers on the housing of the receptacles
• The
program is compatible with the C16-1 series
Additional standards
The 6+PE model corresponds to DIN 9684-1 interface to the signal
transmission on inside cabin applications for agricultural machines and
tractors
9
eco|matem
eco|matem
Standard
10
eco|matem
Standard | Technical Data
General Characteristics
Standard
Characteristics
Number of contacts
3 + PE
Termination technique
Wire gauge / AWG
Flammability
6 + PE
screw type
solder type
crimp type
0.75 - 2.5 mm2
AWG 18-14
max. 0.75mm2
AWG 18
0.14 - 1.5 mm2
AWG 26 - 16
UL 94
VO
Locking system
round thread
View on termination side
of male contact insert
Electrical Characteristics
Rated voltage
IEC 60664-1 1)
400 V
250 V
Pollution degree
IEC 60664-1
1)
3
Installation category
IEC 60664-1 1)
III
Insulation group
IEC 60664-1 1)
II
Rated impulse withstand voltage
IEC 60664-1
Current rating
IEC 60512-5-2
Contact resistance
IEC 60512-2-1
≤5mΩ
Insulation resistance
IEC 60512-3-1
≥ 108 Ω
6000 V
1)
4000 V
16 A / + 55°C
12 A /
+ 55°C
13 A /
+ 55°C
Climatic Characteristics
Climatic category
IEC 60068-1
Operating temperature
40 / 100 /56
40 / 125 / 56
-40°C ... +100°C
-40°C ... +125°C
Mechanical Characteristics
IP-degree
IEC 60529
IP 65 / IP 67
Insertion and withdrawal forces
IEC 60512-13-2
Mechanical operation
IEC 60512-9-1
≤ 15 N
≤ 30 N
≥ 500 mating cycles
Materials
Housing material
PA 6.6 / PA 6
Dielectric material
PA 6.6 / PA 6
Gasket material
Neopren
Material lace for protective cover
TPE
Contact plating
silver plating / gold plating
Derating-Curves 2)
3 + PE
6 + PE
Curve Wire gauge
a
1.5 mm2
b
2.5 mm2
b
25
a
20
15
10
5
0
0
20
40
60
80
100 120
Umgebungstemperatur
Ambient
temperature (°C)
140
30
Current Strombelastbarkeit
carrying capacity
Current Strombelastbarkeit
carrying capacity
30
Curve Wire gauge
a
0.75 mm2
stamped
soldercontacts
b
1.5 mm2
stamped
crimpcontacts
25
20
b
15
a
10
5
0
0
20
40
60
80
100
Umgebungstemperatur
Ambient
temperature (°C)
120
140
Remark
The stated technical values refer to the use as connector without breaking capacity (COC). If these components are used as plug and socket
device a reduced current carrying capacity has to be considered.
The characteristics have to be requested from the manufacturer.
1)
2)
DIN EN 60664-1 ^
= VDE 0110-1 ^
= IEC 60664-1
All contacts under load
11
eco|matem
Standard | Male Cable Connectors | Male Receptacles
Description No. of
contacts
Part number
Silver plating
Drawing
Gold plating
Male cable connector straight | strain relief with clamping ring 6 -12.5 mm
Screw
blue
black
3 + PE
3 + PE
C016 20H003 100 10 C016 20H003 200 10
C016 20H003 100 12 C016 20H003 200 12
Solder
blue
black
6 + PE
6 + PE
C016 30H006 100 10 C016 30H006 200 10
C016 30H006 100 12 C016 30H006 200 12
Crimp 1)
blue
black
6 + PE
6 + PE
C016 10H006 000 10 C016 10H006 000 10
C016 10H006 000 12 C016 10H006 000 12
Male cable connector straight | with internal cable clamping and clamping ring 6 - 10.0 mm
Screw
blue
black
3 + PE
3 + PE
C016 20H003 110 10 C016 20H003 210 10
C016 20H003 110 12 C016 20H003 210 12
Solder
blue
black
6 + PE
6 + PE
C016 30H006 110 10 C016 30H006 210 10
C016 30H006 110 12 C016 30H006 210 12
Crimp 1)
blue
black
6 + PE
6 + PE
C016 10H006 010 10 C016 10H006 010 10
C016 10H006 010 12 C016 10H006 010 12
Male cable connector angled| strain relief with clamping ring 6 -12.5 mm
Screw
blue
black
3 + PE
3 + PE
C016 20K003 100 10
C016 20K003 100 12
C016 20K003 200 10
C016 20K003 200 12
Solder
blue
black
6 + PE
6 + PE
C016 30K006 100 10
C016 30K006 100 12
C016 30K006 200 10
C016 30K006 200 12
Crimp1)
blue
black
6 + PE
6 + PE
C016 10K006 000 10
C016 10K006 000 12
C016 10K006 000 10
C016 10K006 000 12
Male Receptacle
Screw
black
3 + PE
C016 20C003 100 12
C016 20C003 200 12
A
14.0
Solder
black
6 + PE
C016 30C006 100 12
C016 30C006 200 12
12.0
Crimp 1)
black
6 + PE
C016 10C006 000 12
C016 10C006 000 12
16.5
Mounting Instruction 2)
For sealing reason
this surface needs
to be level and
free of burrs
12
Crimp contacts see page 20 2) Mounting hole Ø 22 without chamfer, suitable sealing for screws
is necessary. Tightening torque 0.8 Nm
1)
Figure
eco|matem
Standard | Female Cable Connectors | Female Receptacles
Description No. of
contacts
Part number
Silver plating
Drawing
Figure
Gold plating
Female cable connector straight | strain relief with clamping ring 6 -12.5 mm
Screw
blue
black
3 + PE
3 + PE
C016 20D003 100 10 C016 20D003 200 10
C016 20D003 100 12 C016 20D003 200 12
Solder
blue
black
6 + PE
6 + PE
C016 30D006 100 10 C016 30D006 200 10
C016 30D006 100 12 C016 30D006 200 12
Crimp 1)
blue
black
6 + PE
6 + PE
C016 10D006 000 10 C016 10D006 000 10
C016 10D006 000 12 C016 10D006 000 12
Female cable connector straight | with internal cable clamping and clamping ring 6 - 10.0 mm
Screw
blue
black
3 + PE
3 + PE
C016 20D003 110 10 C016 20D003 210 10
C016 20D003 110 12 C016 20D003 210 12
Solder
blue
black
6 + PE
6 + PE
C016 30D006 110 10 C016 30D006 210 10
C016 30D006 110 12 C016 30D006 210 12
Crimp 1)
blue
black
6 + PE
6 + PE
C016 10D006 010 10 C016 10D006 010 10
C016 10D006 010 12 C016 10D006 010 12
Female cable connector angled| strain relief with clamping ring 6 -12.5 mm
Screw
blue
black
3 + PE
3 + PE
C016 20F003 100 10
C016 20F003 100 12
C016 20F003 200 10
C016 20F003 200 12
Solder
blue
black
6 + PE
6 + PE
C016 30F006 100 10
C016 30F006 100 12
C016 30F006 200 10
C016 30F006 200 12
Crimp1)
blue
black
6 + PE
6 + PE
C016 10F006 000 10
C016 10F006 000 12
C016 10F006 000 10
C016 10F006 000 12
Female Receptacle
Screw
black
3 + PE
A
C016 20G003 100 12 C016 20G003 200 12 13.5
Solder
black
6 + PE
C016 30G006 100 12 C016 30G006 200 12 14.2
Crimp 1)
black
6 + PE
C016 10G006 000 12 C016 10G006 000 12 16.5
Mounting Instruction 2)
For sealing reason
this surface needs
to be level and
free of burrs
Crimp contacts see page 20 2) Mounting hole Ø 22 without chamfer, suitable sealing for screws
is necessary. Tightening torque 0.8 Nm
1)
13
eco|matem
eco|matem
High Voltage
14
eco|matem
High Voltage | Technical Data
General Characteristics
Standard
Characteristics
Number of contacts
3 + PE
Termination technique
6 + PE
crimp type
Wire gauge / AWG
0.14 - 1.5 mm2
AWG 26 - 16
Flammability
UL 94
VO
Locking system
round thread
View on termination side
of male contact insert
Electrical Characteristics
Rated voltage
IEC 60664-1 1)
Pollution degree
IEC 60664-1
600 V
3 (mated)
1)
Installation(overvoltage)category IEC 60664-1 1)
III
Material group
II
IEC 60664-1
1)
Rated impulse withstand voltage IEC 60664-1
1)
6000 V
Current carrying capacity
IEC 60512-5-2
14 A / + 40°C
Contact resistance
IEC 60512-2-1
≤5mΩ
Insulation resistance
IEC 60512-3-1
≥ 108 Ω
Climatic Characteristics
Climatic category
IEC 60068-1
40 / 125 / 56
Operating temperature
-40°C ... +125°C
Mechanical Characteristics
Degree of protection
IEC 60529
Insertion and withdrawal force
IEC 60512-13-2
≤ 35 N
IP 65
Mechanical operation
IEC 60512-9-1
≥ 500 mating cycles
Materials
Housing material
PA 6.6 / PA 6
Dielectric material
PA 6.6 / PA 6
Gasket material
Neopren
Contact plating
silver plating / gold plating
Derating-Curves 2)
Prüfstelle
6 + PE
Current carrying
capacity
Strombelastbarkeit
30
Curve Wire gauge
a
1.5 mm2
stamped
crimpcontacts
25
20
a
15
UL *
CSA
10
5
0
0
20
40
60
80
100
Umgebungstemperatur
Ambient
temperature (°C)
120
Kennwert
3+PE, 600 V, 13 A at AWG 16
3+PE, 600 V, 5 A at AWG 26
6+PE, 600 V, 13 A at AWG 16
6+PE, 600 V, 5 A at AWG 26
3+PE, 600 V, 10.5 A at AWG 16
6+PE, 600 V, 10.5 A at AWG 16
140
In general approvals refer to versions of the connector series. Test report
upon request.
* Please refer to „conditions of acceptability“
Remark
The stated technical values refer to the use as connector without breaking capacity (COC). If these components are used as plug and socket
device a reduced current carrying capacity has to be considered.
The characteristics have to be requested from the manufacturer.
1)
2)
DIN EN 60664-1 ^= VDE 0110-1 ^= IEC 60664-1
All contacts under load
15
eco|matem
High Voltage | Female Cable Connectors | Male Receptacles
Description No. of
Part number
Drawing
contacts
Female cable connector straight | with clamping ring, cable diameter 6 -12.5 mm
Crimp 1)
black
3 + PE
6 + PE
C016 10D003 806 12
C016 10D006 806 12
Male receptacle
Crimp1)
black
3 + PE
6 + PE
C016 10P003 806 12
C016 10P006 806 12
Mounting Instruction 2)
For sealing reason
this surface needs
to be level and
free of burrs.
Remark
• Standard dust cups don’t fi t on high voltage versions special caps upon request.
• Thread size M 20 x 1.5
• If turn protection is required, we recommend to glue receptacles.
16
1)
2)
Crimp contacts see page 20
Tightening torque 4 -5 Nm
Figure
eco|matem
eco|matem
Special Types
17
eco|matem
Special Types* | Male Cable Connectors | Female Cable Connectors
Description No. of
contacts
Part number
Silver plating
Male cable connector straight | with 4 pressure plates
Screw
black 1)
3 + PE
C016 20H003 804 12
Male cable connector straight | 1 pressure plate at PE
Screw
black 1)
3 + PE
C016 20H003 803 12
Female cable connector straight | with 4 pressure plates
Screw
black 1)
3 + PE
C016 20D003 806 12
Female cable connector straight | with turned contacts
Screw
black 1)
18
*
6 + PE
C016 30D006 800 12
Further specifications upon request
More backshell colors upon request
1)
Drawing
Figure
eco|matem
Special Types*| Female Receptacle | Male Receptacle
Description No. of
Part number
Drawing
Figure
contacts
Female receptacle | solder with turned contacts
black
6 + PE
C016 30G006 800 12
Female receptacle colored| 6 + PE crimp1)
yellow
blue
6 + PE
6 + PE
T 3107 800
T 3107 802
Male receptacle | straight dip solder
black
3+ PE
6 + PE
T 3110 010
T 3106 010
Male receptacle | 3 + PE solder with turned contacts
black
3+ PE
T 3110 100
*
Further specifications upon request
Crimp contacts see page 20/ Crimp tooling
1)
19
eco|matem
Supplied
as
Crimp Contacts
for
Insulation Pieces
Part number
Figure
wire gauge
Ø in mm
Male contact
Female contact
100
VN 01 016 0011 1
VN 02 016 0003 1
Stamped single contacts 1.6 mm | 6+PE
silver plating 0.14 - 0.5 mm2
Standard
0.5 - 1.5 mm2
1.0 - 2.0
1.8 - 2.8 100
VN 01 016 0004 1
VN 02 016 0002 1
silver plating 0.14 - 0.5 mm
High voltage
0.5 - 1.5 mm2
1.0 - 2.0
100
VN 01 016 0003 1
VN 02 016 0003 1
1.8 - 2.8 100
VN 01 016 0002 1
VN 02 016 0002 1
gold plating
Standard
0.14 - 0.5 mm2
1,0 - 2,0
100
VN 01 016 0011 2
VN 02 016 0003 2
0.5 - 1.5 mm2
1.8 - 2.8 100
VN 01 016 0004 2
VN 02 016 0002 2
1.0 - 2.0
100
VN 01 016 0003 2
VN 02 016 0003 2
1.8 - 2.8 100
VN 01 016 0002 2
VN 02 016 0002 2
2
gold plating 0.14 - 0.5 mm
High voltage
0.5 - 1.5 mm2
2
Stamped contact on reel for hand crimping tools 1.6 mm | 6+PE
silver plating 0.14 - 0.5 mm2
Standard
0.5 - 1.5 mm2
1.0 - 2.0
200
ZN 01 016 0011 1
ZN 02 016 0003 1
silver plating 0.14 - 0.5 mm2
High voltage
0.5 - 1.5 mm2
1.8 - 2.8 200
ZN 01 016 0004 1
ZN 02 016 0002 1
1.0 - 2.0 200
ZN 01 016 0003 1
ZN 02 016 0003 1
1.8 - 2.8 200
ZN 01 016 0002 1
ZN 02 016 0002 1
gold plating
Standard
0.14 - 0.5 mm2
1.0 - 2.0
200
ZN 01 016 0011 2
ZN 02 016 0003 2
0.5 - 1.5 mm
1.8 - 2.8 200
ZN 01 016 0004 2
ZN 02 016 0002 2
1.0 - 2.0
200
ZN 01 016 0003 2
ZN 02 016 0003 2
1.8 - 2.8 200
ZN 01 016 0002 2
ZN 02 016 0002 2
2
gold plating 0.14 - 0.5 mm
High voltage
0.5 - 1.5 mm2
2
Stamped contact on reel for crimping machines contact feeding right hand side1.6 mm | 6+PE
silver plating 0.14 - 0.5 mm2
Standard
0.5 - 1.5 mm2
1.0 - 2.0
2000
HN 01 016 0011 1
HN 02 016 0003 1
silver plating 0.14 - 0.5 mm2
High voltage
0.5 - 1.5 mm2
1.8 - 2.8 2000
HN 01 016 0004 1
HN 02 016 0002 1
1.0 - 2.0
2000
HN 01 016 0003 1
HN 02 016 0003 1
1.8 - 2.8 2000
HN 01 016 0002 1
HN 02 016 0002 1
gold plating
Standard
0.14 - 0.5 mm2
1.0 - 2.0
2000
HN 01 016 0011 2
HN 02 016 0003 2
0.5 - 1.5 mm
1.8 - 2.8 2000
HN 01 016 0004 2
HN 02 016 0002 2
1.0 - 2.0
2000
HN 01 016 0003 2
HN 02 016 0003 2
1.8 - 2.8 2000
HN 01 016 0002 2
HN 02 016 0002 2
2
gold plating 0.14 - 0.5 mm
High voltage
0.5 - 1.5 mm2
2
Stamped contact on reel for crimping machines contact feeding left hand side1.6 mm | 6+PE
silver plating 0.14 - 0.5 mm2
Standard
0.5 - 1.5 mm2
1.0 - 2.0
2000
TN 01 016 0011 1
TN 02 016 0003 1
1.8 - 2.8 2000
TN 01 016 0004 1
TN 02 016 0002 1
silver plating 0.14 - 0.5 mm2
High voltage
0.5 - 1.5 mm2
1.0 - 2.0
2000
TN 01 016 0003 1
TN 02 016 0003 1
1.8 - 2.8 2000
TN 01 016 0002 1
TN 02 016 0002 1
gold plating
Standard
0.14 - 0.5 mm
1.0 - 2.0
2000
TN 01 016 0011 2
TN 02 016 0003 2
0.5 - 1.5 mm
1.8 - 2.8 2000
TN 01 016 0004 2
TN 02 016 0002 2
1.0 - 2.0
2000
TN 01 016 0003 2
TN 02 016 0003 2
1.8 - 2.8 2000
TN 01 016 0002 2
TN 02 016 0002 2
2
2
gold plating 0.14 - 0.5 mm
High voltage
0.5 - 1.5 mm2
2
20
Find our tools in the catalogue “Tools”
eco|matem
Description
Accessories
Part number
Figure
Back shell right angled (Packaging units 10 pieces)
right angled with
clamping ring
blue
C016 G09 042 G10 X
black
C016 G09 041 G10 X
Back shell straight (Packaging units 5 pieces)
colored back shells
blue
C016 G11 042 E1 V
black
C016 G11 041 E10 V
red
C016 G11 043 E10 V
white
C016 G11 044 E10 V
green
C016 G11 045 E10 V
yellow
C016 G11 046 E10 V
orange
C016 G11 048 E10 V
violet
C016 G11 060 E10 V
brown
C016 G11 061 E10 V
Cable clamp (Packaging units 10 pieces)
for all straight cable
connectors
Cable clamp diameter
Ø 6 - 10 mm
N 16 110 2000 X
Plugs brass
for 3+PE
red
N 17 021 0001
für 6+PE
red
N 17 17 0001
black
N 17 17 0001 1
21
eco|matem
Accessories
Description
Part number
Figure
Back shells (Packaging units 10 pieces)
Back shell PG 9
with thrust collar
T 3102 003 7 X
Back shell PG 11
with thrust collar
T 3102 004 7 X
Back shell PG 13.5
with clamping ring
T 3102 005 7 X
Rubber gasket
for cable diameter 4-6 mm²
eco|matem
N 06 007 0004
While mounting the rubber gasket for 4-6 mm², the cable clamp shall be
bolted with the convex section face-down in order to ensure the strain relief.
Tools
Description
Wire gauge
Contact locator
Crimping dies
Tool
Removal tool for
crimp contacts
-
-
-
FG 0300 146 1
Hand crimp tools for
single contacts
0.14 - 0.5 mm2
TA 0002 146 0001
TA 0000 202
TA 0500
0.5 - 1.5 mm2
TA 0002 146 0001
TA 0000 163
TA 0500
0.14 - 0.5 mm2
-
-
TA 0700 203
0.5 - 1.5 mm2
-
-
TA 0700 309
Hand crimp tools for
contacts on reel
22
Part number
eco|matem
Protective Covers
Description
Part number
Drawing
Figure
Protective covers for cable and receptacle housings
for male cable connector C016 00U000 010 12
round cord
for male receptacle
round cord
C016 00U000 000 12
forfemalecableconnector C016 00V000 010 12
round cord
for female receptacle
round cord
C016 00V000 000 12
for male cable connector
nylon cord
T 6482 000
für male receptacle
nylon cord
T 6482 001
stainless steel cord
T 6482 008
fürfemalecableconnector
nylon cord
T 6483 000
for female receptacle
nylon cordr
T 6483 001
Mounting of the protective covers on the back shell, male or female receptacles
Protective covers for 600 V version upon request
23
eco|matem
Mounting Instructions
Mounting instruction, straight cable connector
Stripping lengths
Measure a 1)
Measure b
Screw contacts
with internal cable clamping
without internal cable clamping
18 +1
25 +1
7 +1 2)
7 +1 2)
Solder contacts
with internal cable clamping
without internal cable clamping
14 +1
22 +1
4 +1
4 +1
Crimp contacts
0.14 – 0.50 mm2
0.50 – 1.5 mm2
with internal cable clamping
without internal cable clamping
pay attention at keying
3 +0,5
3.5 +1
clamping ring with mounted gasket
14 +1
22 +1
internal
cable clamping
b
back shell
tightening torque
1.5 - 2 Nm
additionally
included gasket
a
male contact
insert with
locking ring
TR 22 x 2
cable nut
tighteningtorquet
1.5 - 2 Nm 3)
tightening torque max. 0.3 Nm 3)
female contact
insert with
locking ring
Mounting instruction, right angled cable connector
Stripping lengths
Measure a1)
Measure b
Screw contacts
without internal cable clamping
35 +1
7 +1 2)
Solder contacts
without internal cable clamping
32 +1
4 +1
Crimp contacts
0.14 – 0.5 mm2
0.50 – 1.5 mm2
without internal cable clamping
pay attention at keying
3 +0,5
3.5 +1
32 +1
right angled back shell
tightening torque
1 - 2 Nm
b
a
clampingringwith
male contact
insert with
locking ring
mountedgasket
shell
female contact
insert with
locking ring
24
1)
3)
TR 22 x 2
additionally
included
gasket
PE + 2 mm 2) End splice recommended
The tightening torque figures cand vary depending on the cable you use
cable nut
tighteningtorquet
1.5 - 2 Nm 3)
eco|matem
Technical Information
Order Information
Color coding
Crimp version
Backshells of cable connectors are available in diff erent colors upon Order number do not include crimp contacts. Please order separately
request. Min order quantity = 1000 pcs. per type.
(see page 20).
Mechanical coding
Crimp tooling
Achieved by special coding pins which are inserted into contact
cavities. Min. order quantitiy = 1000 pcs. per type.
Ask for our catalogue “Tools”.
Structure of part number
C016
30
D
Series
Terminationtechnique
10 = Crimp (6 + PE)
20 = Screw (3 + PE)
30 = Solder (6 + PE)
Style
No. of Poles
H = Male cable connector 003 = 3 + PE
D = Femalecableconnector 006 = 6 + PE
K = Right angled
male cable connector
F = Right angled
female cable connector
C = Male receptacle
G = Female receptacle
P = Male receptacle
006
1
00
10
Contact Plating
Strain relief
Version
1 = silver plating
00 = receptacle or 10 = cable connector
2 = gold plating
cable connector
in blue/
0 = without contacts
with
black
clamping ring 12 = cable or
10 = cable connector
receptacle
with internal
connector
cable clamp
in blue
Screw termination
Diagram 1 below shows the range of tensile strength for a screw
connection with a clamp screw M3, fastened with a torque of 50
Ncm, depending on the wire size.
Chart 1
Diagramm 1
Wire size (mm2)
1.5
2.5
Screw size
M3
M3
Test torque (Ncm)
max. 50
max. 50
Tensilestrength
Screw clamps are designed acc. to EN 60999-1/VDE
06095.1. Chart 1 below shows the screw size depending
on wire size and the required clamping and testing torque.
Wire gauge
Conversion AWG - mm2
The comparison chart 2 below allows a cross reference between
American Wire Gauge (AWG) and metric wire sizes (mm2).
Chart 2
AWG
Wire composition
Wire diameter
Wire size
AWG
Wire composition
Wire diameter
Wire size
30
1 x 0.25
0.25 mm
0.05 mm2
20
1 x 0.81
0.81 mm
0.52 mm2
7 x 0.10
0.36 mm
0.06 mm2
7 x 0.32
0.97 mm
0.56 mm2
1 x 0.32
0.32 mm
0.08 mm2
19 x 0.20
1.02 mm
0.62 mm2
7 x 0.13
0.38 mm
0.09 mm2
1 x 1.02
1.02 mm
0.79 mm2
1 x 0.40
0.40 mm
0.13 mm
19 x 0.25
1.27 mm
0.96 mm2
7 x 0.16
0.48 mm
0.14 mm2
16
19 x 0.29
1.44 mm
1.23 mm2
19 x 0.10
0.51 mm
2
0.15 mm
14
19 x 0.36
1.80 mm
1.95 mm2
1 x 0.51
0.51 mm
0.21 mm2
12
19 x 0.46
2.29 mm
3.09 mm2
7 x 0.20
0.61 mm
0.23 mm2
10
37 x 0.40
3.10 mm
4.60 mm2
19 x 0.13
0.64 mm
2
0.24 mm
8
133 x 0.29
4.0 mm
8.80 mm2
1 x 0.64
0.64 mm
0.33 mm2
6
133 x 0.36
5.5 mm
13.5 mm2
7 x 0.25
0.76 mm
0.36 mm2
19 x 0.16
0.81 mm
0.38 mm2
28
26
24
22
18
2
It is to be noted that wires of the same AWG number but with different
composition have slightly different mm2.
25
eco|matem
Technical Information
Crimp Termination
Assembly Instructions
Acrimpconnectionisanon-detachableelectricalconnectionbetween
a wire and a crimp contact produced with the crimp technology.
Precise crimping dies which are matched to the crimp barrel and the
wire size and a defined deformation result in a reliable electrical
connection.
There are open crimp barrels (stamped contacts) and closed crimp
barrels (turned contacts).
The main advantages of crimp connections are:
• Efficient termination of contacts
• Reproducible terminations achieve consistent electrical and
mechanical results
The requirements for crimp connections are defined
in IEC 60352 Part 2 / DIN EN 60352 Part 2.
An important point of the quality of a crimp connection is the
achieved tensile strength of the termination.
Easily measured, the tensile strength is a practible means for quality
control purposes.
Diagram 2 below shows the required minimum tensile strength for
open and closed barrels depending on the wire size
For crimp contacts use the released crimp tool.
The insertion and extraction of crimp contacts shall only be approved
with the corresponding insertion/extraction tool.
A detailed description of the crimp technology can be found in
our crimp tooling catalogues.
Crimp contacts are in this catalogue on page 20.
Diagramm 2
N
lb
1000
4000
3000
500
400
2000
300
Min. tensile strength N
500
400
100
300
50
40
200
30
100
20
50
40
10
30
5
26
mm2 0,05
AWG
0,1
0,2
0,5
1,0
1,5
2,5
4,0 6,0
28
20
12
26
10
14
24 22
18 16
Wire gauge in mm2 / AWG
10,0
8
20
Min. tensile strength lb
1000
200
eco|matem
Technical Information
Chart 4
Degree of Protection
2nd
Electrical devices to which connectors belong to have to be protected for
charact.
safety reasons from outside influences like dust, foreign objects, direct
contact, moisture and water. This protection is provided on industrial numeral
connectors by its housings with their latching devices and sealed cable
0
entries. The degree of protection can be selected depending on the type of
1
intended use. The standard IEC 60529 and/or DIN EN 60529/VDE 0470
Part 1 has specified the degree of protection and divided into several classes.
2
The degree of protection is indicated in the following way:
IP65
Code letters
(Internat. Protection)
1st charact. numeral (degree of protection against access
to hazardous parts and against solid foreign objects)
2nd charact. numeral (degree of protection against ingress of water)
Non-protected
--
Protected against vertically Vertically falling drops shall
falling water drops
have no harmful effects.
Protected against vertically Vertically falling drops shall
falling water drops when
have no harmful effects
enclosure tilted up to 15°
when
the enclosure is tilted at any
angel up to 15° on either
side
of the vertical.
Protected against spraying Water sprayed at an angle up
water
to 60° on either side of the
vertical shall have no harmful
effects
4
Protected against splashing Water splashed against the
water
enclosure from any direction
shall have no harmful effects.
5
Protected against water
jets
Chart 3
Definition
Definition
3
The following charts 3 an 4 give an overview about all protection degrees.
1st
Brief description
charact.
numeral
Brief description
Water projected in jets
against the enclosure from
any direction shall have no
harmful effects.
0
Non-protected
–
6
1
Protected against access to
hazardouspartswiththeback
of a hand. Protected against
solid foreign objects of
≥ 50mm Ø.
The probe, sphere of 50mm
Ø, shall not fully penetrate and
shallhaveadequateclearance
from hazardous parts.
Protected against powerful Water projected in powerful
water jets
jets against the enclosure
from any direction shall have
no harmful effects.
7
Protected against access to
hazardous parts with a finger.
Protected against solid
foreign objects of
≥ 12.5mm Ø.
The jointed test finger of
12mm Ø, 80mm length,
shall have adequate clearance
from hazardous parts. The
probe, sphere of 12.5mm Ø,
shall not fully penetrate.
Protected against the
effects
of temporary immersion in
water
Intrusionofwaterinquantities
causing harmful effects
shall not be possible when
the enclosure is temporalily
immersed in water for 30 min.
in 1m depth.
8
3
Protected against access
to hazardous parts with a
tool.Protectedagainstsolid
foreign objects of
≥ 2.5mm Ø.
The probe of 2.5mm Ø shall
not penetrate at all.
Protected against the
effects
of continous immersion in
water
4
Protected against access to
hazardous parts with a wire.
Protected against solid
foreign objects of ≥ 1mm Ø.
The probe of 1mm Ø shall
not penetrate at all.
Intrusionofwaterinquantities
causing harmful effects shall
not be possible when the
enclosure is continuously
immersed in water under
conditions which shall be
agreedbetweenmanufacturer
and user but which are more
severe than for numeral 7.
5
Protected against access to
hazardous parts with a wire.
Dust-protected.
The probe of 1mm Ø shall
not penetrate.
Intrusion of dust is not
totallyprevented,butdustshall
not penetrate in a quantity
to interfere with satisfactory
operation of the device or to
impair safety.
6
Protected against access to
hazardous parts with a wire
Dust-tight.
The probe of 1mm Ø shall
not penetrate.
No intrussion of dust.
2
1)
9K1)
Protected against water
Water projected in powerful
during high pressure/steam jets with high pressure against
jet cleaning
the enclosure from any
directionshallhavenoharmful
effects.
Remark: Numeral acc. to DIN 40050 part 9, vehicles IP code
27
eco|matem
Remarks / Safety Classification
1. General Remarks
These connectors are designed and produced in conformity with the
low voltage directive (73/23/EWG) respectively
Gerätesicherheitsgesetz (German law) and are especially in
accordance with the standards DIN EN 61984 / IEC 61984 (VDE
0627); IEC 60664-1 (VDE 0110-1) and IEC 60529.
The connectors may be used only within the technical ratings.
All technical data refer to mated connectors under live conditions.
The safety of the connector system depends on the correct selection
of products, proper assembly of the connector device and a precise
fit of the connectors
2. Application Remarks
Connectors with / without breaking capacity must be used according to
specified technical ratings.
The technical data represents the initial value of mated parts under
predetermined conditions and length of time.These values could change
with different test parameters or product requirements.
The connectors of the series are designed for the areas of
application including the construction and installation of controlling
and electrical devices.
The product has been tested for the intended purposes only. If the
connection is used other than originally intended, or in another
manner that we have not previously tested, the consumer assumes full
responsibility.
All rated data for the connectors listed in this catalogue are based on
overvoltage
category III and pollution degree 3 for electronic applications if
not stated differently. Connectors were completely mated according to their
respective safety locking mechanism. Selection and testing of connectors
with / without breaking capacity to meet specific product or industrial
requirements such as rated voltage and the related clearances and creepage
distances are the responsibility of the user.
3. Assembling Remarks
Protection against electrical shock of the termination of the
connectors shall be secured by correct mounting. Connectors of the
same or different series being mounted side by side may be protected
against incorrect mating by the use of coding options. Care must
be taken to ensure the parts are correctly mated and screws are
tightened with the proper torque.
4. Termination Remarks
Cable connectors are eff ectively secured when using the strain relief
(internal clamping ring). All cable properties or specifi cations must
becompatible with the connector design and materials.
Please make sure that the usability of the cable in conjunction with
the clamping ring is given.
Designated wire conductors must be terminated to the correct poles
in the connector.
28
Crimp contacts must be fully inserted into the plastic housing and
strain relief assured with a slight tug on the wire.
Wire should be stripped correctly according to printed specifi cations
to insure no electrical contact can be made between the conductors.
There should be no nicked or cut strains during the stripping action.
eco|matem
Summary of Part Numbers
Bestellnummer
C016 00U000 000 12
C016 00U000 010 12
C016 00V000 000 12
C016 00V000 010 12
C016 10C006 000 12
C016 10C006 000 12
C016 10D003 806 12
C016 10D006 000 10
C016 10D006 000 10
C016 10D006 000 12
C016 10D006 000 12
C016 10D006 010 10
C016 10D006 010 10
C016 10D006 010 12
C016 10D006 010 12
C016 10D006 806 12
C016 10F006 000 10
C016 10F006 000 10
C016 10F006 000 12
C016 10F006 000 12
C016 10G006 000 12
C016 10G006 000 12
C016 10H006 000 10
C016 10H006 000 10
C016 10H006 000 12
C016 10H006 000 12
C016 10H006 010 10
C016 10H006 010 10
C016 10H006 010 12
C016 10H006 010 12
C016 10K006 000 10
C016 10K006 000 10
C016 10K006 000 12
C016 10K006 000 12
C016 10P003 806 12
C016 10P006 806 12
C016 20C003 100 12
C016 20C003 200 12
C016 20D003 100 10
C016 20D003 100 12
C016 20D003 110 10
C016 20D003 110 12
C016 20D003 200 10
C016 20D003 200 12
C016 20D003 210 10
C016 20D003 210 12
C016 20D003 806 12
C016 20F003 100 10
C016 20F003 100 12
C016 20F003 200 10
C016 20F003 200 12
C016 20G003 100 12
C016 20G003 200 12
C016 20H003 100 10
C016 20H003 100 12
C016 20H003 110 10
C016 20H003 110 12
C016 20H003 200 10
C016 20H003 200 12
C016 20H003 210 10
C016 20H003 210 12
C016 20H003 803 12
Seite
23
23
23
23
12
12
16
13
13
13
13
13
13
13
13
16
13
13
13
13
13
13
12
12
12
12
12
12
12
12
12
12
12
12
16
16
12
12
13
13
13
13
13
13
13
13
18
13
13
13
13
13
13
12
12
12
12
12
12
12
12
18
Bestellnummer
C016 20H003 804 12
C016 20K003 100 10
C016 20K003 100 12
C016 20K003 200 10
C016 20K003 200 12
C016 30C006 100 12
C016 30C006 200 12
C016 30D006 100 10
C016 30D006 100 12
C016 30D006 110 10
C016 30D006 110 12
C016 30D006 200 10
C016 30D006 200 12
C016 30D006 210 10
C016 30D006 210 12
C016 30D006 800 12
C016 30F006 100 10
C016 30F006 100 12
C016 30F006 200 10
C016 30F006 200 12
C016 30G006 100 12
C016 30G006 200 12
C016 30G006 800 12
C016 30H006 100 10
C016 30H006 100 12
C016 30H006 110 10
C016 30H006 110 12
C016 30H006 200 10
C016 30H006 200 12
C016 30H006 210 10
C016 30H006 210 12
C016 30K006 100 10
C016 30K006 100 12
C016 30K006 200 10
C016 30K006 200 12
C016 G09 041 G10 X
C016 G09 042 G10 X
C016 G11 041 E10 V
C016 G11 042 E1 V
C016 G11 043 E10 V
C016 G11 044 E10 V
C016 G11 045 E10 V
C016 G11 046 E10 V
C016 G11 048 E10 V
C016 G11 060 E10 V
C016 G11 061 E10 V
FG 0300 146 1
HN 01 016 0002 1
HN 01 016 0002 2
HN 01 016 0003 1
HN 01 016 0003 2
HN 01 016 0004 1
HN 01 016 0004 2
HN 01 016 0011 1
HN 01 016 0011 2
HN 02 016 0002 1
HN 02 016 0002 1
HN 02 016 0002 2
HN 02 016 0002 2
HN 02 016 0003 1
HN 02 016 0003 1
HN 02 016 0003 2
Seite
18
12
12
12
12
12
12
13
13
13
13
13
13
13
13
18
13
13
13
13
13
13
19
12
12
12
12
12
12
12
12
12
12
12
12
21
21
21
21
21
21
21
21
21
21
21
22
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Bestellnummer
Seite
HN 02 016 0003 2
20
N 06 007 0004
22
N 16 110 2000 X
21
N 17 17 0001
21
N 17 17 0001 1
21
N 17 021 0001
21
T 3102 003 7 X
22
T 3102 004 7 X
22
T 3102 005 7 X
22
T 3106 010
19
T 3107 800
19
T 3107 802
19
T 3110 010
19
T 3110 100
19
T 6482 000
23
T 6482 001
23
T 6482 008
23
T 6483 000
23
T 6483 001
23
TA 0000 163
22
TA 0000 202
22
TA 0002 146 0001
22
TA 0002 146 0001
22
TA 0500 22
TA 0500 22
TA 0700 203
22
TA 0700 309
22
TN 01 016 0002 1
20
TN 01 016 0002 2
20
TN 01 016 0003 1
20
TN 01 016 0003 2
20
TN 01 016 0004 1
20
TN 01 016 0004 2
20
TN 01 016 0011 1
20
TN 01 016 0011 2
20
TN 02 016 0002 1
20
TN 02 016 0002 1
20
TN 02 016 0002 2
20
TN 02 016 0002 2
20
TN 02 016 0003 1
20
TN 02 016 0003 1
20
TN 02 016 0003 2
20
TN 02 016 0003 2
20
VN 01 016 0002 1
20
VN 01 016 0002 2
20
VN 01 016 0003 1
20
VN 01 016 0003 2
20
VN 01 016 0004 1
20
VN 01 016 0004 2
20
VN 01 016 0011 1
20
VN 01 016 0011 2
20
VN 02 016 0002 1
20
VN 02 016 0002 1
20
VN 02 016 0002 2
20
VN 02 016 0002 2
20
VN 02 016 0003 1
20
VN 02 016 0003 1
20
VN 02 016 0003 2
20
VN 02 016 0003 2
20
ZN 01 016 0002 1
20
ZN 01 016 0002 2
20
ZN 01 016 0003 1
20
Bestellnummer
ZN 01 016 0003 2
ZN 01 016 0004 1
ZN 01 016 0004 2
ZN 01 016 0011 1
ZN 01 016 0011 2
ZN 02 016 0002 1
ZN 02 016 0002 1
ZN 02 016 0002 2
ZN 02 016 0002 2
ZN 02 016 0003 1
ZN 02 016 0003 1
ZN 02 016 0003 2
ZN 02 016 0003 2
Seite
20
20
20
20
20
20
20
20
20
20
20
20
20
29
eco|matem
30
Your Notes
eco|matem
Your Notes
31
International
England
Amphenol Limited
Thanet Way, Whitstable
Kent, CT53JF
Telefon +44 1227 773 200
www.amphenol.co.uk
Mexiko
Amphenol Mexico
Prolongacion Reforma 61 - 6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F.
Telefon +52 55 5258 99 84
www.amphenolmexico.com
Taiwan
Amphenol East Asia Limited-Taiwan
5F, No. 361, Fusing 1st Rd
Gueishan Township,
Taoyuan County 333
Telefon +886 3 2647 200
www.amphenol.com
Australien
Amphenol Australia Pty. Ltd.
2 Fiveways Blvd
Keysborough
Victoria 31 73
Telefon +61 3 8796 88 88
www.amphenol.com.au
Frankreich
Amphenol Socapex S.A.S.
948, Promenade de l’Arve, BP 29
Thyez Cedex, 74311
Telefon +33 4 5089 28 00
www.amphenol-socapex.com
Singapur
Asia Pacific Sales Operations
72 Bendemeer Rd, No.03-32/33
Hiap Huat House, Luzerne, 339941
Singapore
Telefon +65 6294 2128
www.amphenol.com
Amphenol LTW Technology Co., Ltd.
9F, No. 657-12, Zhongzheng Road
Xinzhuang Dist., New Taipei City
242 Taiwan
Telefon +886 2 2908 5626
sales@ltw-tech.com
www.amphenolltw.com
Brasilien
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132, 20th Floor
CEP 05423-101 Sao Paulo SP
Telefon +55 11 3815 10 03
www.amphenol.com.br
Indien
Amphenol Interconnect India Pvt Ltd
105, Bhosari Industrial Area
Pune – 411 026
Telefon +91 20 2712 04 81
www.amphenol-in.com
Spanien
Amphenol Espana
Edificio Burgosol, Oficina 55
C/Comunidad de Madrid, 35 bis
Las Rozas (Madrid), 28230
Telefon +34 91 6407 302
www.amphenol.com
Türkei
Amphenol Turkey
Sun Plaza Kat: 15
Maslak Mah. Bilim Sok.No:15
34398 Sisli - Istanbul
Telefon +90 2123 679 220
www.amphenol.com.tr
China
Amphenol-Tuchel Electronics
China Branch
20 Tianshan Road
Changzhou 213022
Telefon +86 519 85 11 03 01
www.amphenol.info
Italien
Amphenol-Tuchel Italy
Via Barbaiana n. 5
20020 Lainate (MI)
Telefon +39 02 9325 41
www.amphenol.info
Südafrika
Amphenol International Ltd
Chislehurston
30 Impala Road
2196 Chislehurston
Sandton, 2146
Telefon +27 11 7839 517
www.amphenol.co.za
USA
Amphenol-Tuchel Electronics /
Amphenol Sine Systems
44724 Morley Drive
48036 Clinton Township, MI
Telefon +1 586 913 8630
www.amphenol.info
Deutschland
Amphenol-Tuchel Electronics GmbH
August-Häusser-Str. 10
74080 Heilbronn
Telefon +49 7131 929 0
www.amphenol.de
Korea
Amphenol DaeShin Elect and
Precision Co.,Ltd
558 Songnae-Dong, Sosa-Gu
Bucheon-City, Kyunggi-Do
Korea 422-130
Telefon +82 32 6103 800
www.amphenol.co.kr
Amphenol Corporation
Corporate Headquarters
358 Hall Avenue
Wallingford, CT 06492
Telefon +1 877 2674 366
Telefon +1 203 2658 900
www.amphenol.com
More Amphenol companies can be
found here: www.amphenol.com
Important Notice
All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally
binding; particularly the information does not constitute or provide any legal guaranties (“Beschaffenheitsgarantie” or “Haltbarkeitsgarantie”).
We reserve the right to change the design due to improvement in quality, development or production requirements. This catalogue must not be used in any form or manner without our prior
approval in writing (Copyright Law, Fair Trading Law, Civil Code).
Your engineering sales representative:
Amphenol-Tuchel Electronics GmbH | August -Haeusser Straße 10 | 74080 Heilbronn, Germany
Telephone: +49 (0)7131 929 - 0 | Fax: +49 (0)7131 929 - 486 | www.amphenol.info
ATE 2200 G 0615 / 1000 0615 Printed on chlorin-free bleached paper, specifications may be changed without notice. Copyright by Amphenol-Tuchel Electronics GmbH, Germany
Argentinien
Amphenol Argentina
Av. Callao 930
2nd Floor Office B “Plaza“
C1023 AAP Buenos Aires
Telefon +54 11 4815 68 86
www.amphenol.com.ar