C70210M0089004

Smart Card Connectors Low Profile PUSHMATIC® Series C702C Low Profile PUSHMATIC® The Smart Card Connector offers a super low profile height to enable the PUSHMATIC®function also in such places where installation conditions are restricted in size. Main applications are handheld devices and new generations of POS terminals. Design features • miniature low profile size • landing and self-cleaning contact design • card locking in active position • card presence switch (normally open) acc. to EMV • micro switch as locking sensor • automatic card eject after transaction • termination to application with flexible pcb • 2 way solenoid wire including 2.54 mm socket • manual unlocking after power failure possible • housing bottom removable to remove foreign debris i.e. coins (optional) Assembly instructions: For correct assembly please refer to the instructions on the next page. Please make sure that flexprints remain free and unrestricted after assembly. 23 C702C Smart Card Connectors Low Profile PUSHMATIC® Contact position Part No. Low Profile PUSHMATIC® with debris slot without debris slot ISO ISO C702 10M008 900 4 C702 10M008 901 4 1,5 6,3 Description CHIP UP 0,9 65,8 92 X 31,4 36,1 61,5 65 16,85 1 2,8 (INAKTIV / INACTIVE) (AKTIV / ACTIVE) 7 76,1 94,1 34,2 40,85 MINIMALE GERÄTESEITIGE ABSTÜTZUNG MINIMUM REQUIRED SUPPORT BY CUSTOMER TERMINAL C702 10M008 900 4 PUSHMATIC LOW PROFILE MIT ENTSORGUNGSSCHACHT PUSHMATIC LOW PROFILE WITH DEBRIS SLOT M2 (ø10) 2,4 76,1 40,3 ODER: 3 x BOHRUNG FÜR GEWINDEFURCHENDE SCHRAUBE M2 OR: 3 x HOLE FOR THREAD ROLLING SCREW M2 M2 (ø10) 31 ±0,3 53 ±0,3 76,1 2,4 6,5 ABSTÜTZUNG VON OBEN UND UNTEN SUPPORT FROM TOP AND BOTTOM 61,5 65 2 2 16,85 61,5 65 6,5 ABSTÜTZUNG VON OBEN UND UNTEN SUPPORT FROM TOP AND BOTTOM 25,5 2,4 10,5 40,3 10,5 25,5 C702 10M008 901 4 PUSHMATIC LOW PROFILE OHNE ENTSORGUNGSSCHACHT PUSHMATIC LOW PROFILE WITHOUT DEBRIS SLOT 28,5 ±0,3 MONTAGEHINWEIS FÜR KUNDEN CUSTOMER ASSEMBLY INSTRUCTIONS 24 3,65 3 +0,7 0 57,8 11 54,2 BUCHSENLEISTE FÜR PFOSTENVERBINDER SOCKET FOR HEADER 0,63 x 0,63 3 24 C1 C5 C2 C6 C3 C7 C4 C8 S S 2,54 ODER: BOHRUNG FÜR GEWINDEFURCHENDE SCHRAUBE M2 OR: HOLE FOR THREAD ROLLING SCREW M2 EIN- / AUSGABE INACTIVE - POSITION LESESTELLUNG ACTIVE - POSITION 16,85 Ansicht X View 7,5 ±1 DICKE THICKNESS 0,3 15,4 SCHALTER FÜR KARTENANWESENHEIT UND VERRIEGELUNG IN REIHE CARD PRESENCE SWITCH AND LOCKING DETECTOR IN SERIES 2,4 C702C Technical Data Electrical Characteristics Standard Value Contact resistance IEC 60512-2, Test 2a ≤ 100 mΩ Insulation resistance IEC 60512-3, Test 3a ≥ 109 Ω High voltage resistance IEC 60512-2, Test 4a 500 VAC; 1 min Unlocking solenoid Rated voltage 5 V ± 10% Current consumption ≈2A Current pulse length 10 ... 30 ms Pulse break ≥1s Climatical Characteristics (Preliminary) Climatic category IEC 60068-1 Operating temperature without condensation Storage temperature 20 / 60 / 21 - 20 °C ... + 60 °C - 40 °C ... + 85 °C Mechanical Characteristics (Preliminary) Card insertion force IEC 60512-7, Test 13b ≤ 10 N Mechanical lifetime IEC 60512-5, Test 9a (without corrosion stress) 300,000 mating cycles Vibration IEC 60512-4, Test 6d f = 4 ... 11.2 Hz f = 11.2 ... 500 Hz 2 h / axis Shock, without disconnection IEC 60512-4, Test 6c ≤ 40 g; 6 ms; halfsine 100 shocks / direction in 3 axis Shock, without destruction IEC 60512-4, Test 6c 500 g; 1 ms; halfsine 2 shocks / direction in 3 axis Contact force 10 mm DA a=5g 20 ... 50 cN Switch Description Function Card presence switch and locking detector in series Card detection, card in slot Contacts locked, card in active position free from potential; ≤ 10 ms chattering time Switching capacity max. 12 V / 50 mA (200,000 switching cycles) min. 5 V / 0.1 mA (300,000 switching cycles) Termination Suitable connector Flexprint 10 contacts; 1 mm pitch Flexprint connector 10 contacts; 1 mm pitch; see page 30 «Accessories Flexprint Connectors» 25