CLS50-24M2RF-02.00F

SYM REVISION DESCRIPTION Preliminary - NOTICE OF PROPRIETARY RIGHTS THIS DOCUMENT CONTAINS CONFIDENTIAL DATA, INCLUDING TRADE SECRETS, PROPRIETARY TO TIMES MICROWAVE SYSTEMS. DISCLOSURE OF THIS DATA IS EXPRESSLY CONDITIONED UPON YOUR ASSENT THAT ITS USE IS LIMITED TO USE WITHN YOUR COMPANY ONLY. ANY OTHER USE IS STRICTLY PROHIBITED WITHOUT THE PRIOR WRITTEN CONSENT OF TIMES MICROWAVE SYSTEMS. DFTM TZ DATE APPD 2021/08/27 JM DATE 2021/08/27 3 2 1 Times Microwave.com Clarity™Series CLS50-18M18M-XX.XXF(M) SERIAL#XXXX(TMC) WW/YY 1. RF test requirements: 1.1. VSWR: 1.35 Max @ 50GHz 1.2. Loss: See BOM 2. Connector Specification 2.1. Frequency range : DC ~ 50GHz 2.2. Impedance : 50 Ohm Nom. 2.3. Material and Finish 2.3.1. Body & Hex Nut : Passivated Stainless Steel 2.3.2. Insulator : PTFE & ULTEM 2.3.3. Center contact & Pin : Gold plated Beryllium copper 2.3.4. Solder Body : Gold plated Brass 2.3.5. Bush : Passivated Stainless Steel 2.3.6. Lock ring : Beryllium Copper 2.3.7. Clamp nut : Nickel plated Brass 2.3.8. O-ring : Silicone Rubber 3. Cable Specification 3.1. Center Conductor:Silver Plated Copper Clad Steel Wire 3.2. Dielectric:Solid TF4 3.3. Outer Conductor: Silver Plated Copper Tape Silver Plated Copper Braids 3.4. Jacket: FEP 3.5. Armor: Steel Spring Armor with PTFE Braids 4. RoHS Compliant Label A: Times Microwave.com Clarity™Series CLS50-24M2RF-XX.XXF(M) Label B: SERIAL#XXXX(TMC) WW/YY MATL: N/A DWG SIZE DATE ALL DIMENSIONS ARE IN mm MACHINED SURFACES FINISH 1.6 RMS MAX. REMOVE ALL BURRS 0.15X45˚ MAX. BREAK MACHINE CORNERS 0.15X45˚ D MAX. FILLET R. TOLERANCES ON DECIMALS .X ±0.3 .XX ±0.15 ANGLES ±2° FRACTIONS ± N/A USED ON: O SCALE: DFTM. UNLESS OTHERWISE SPECIFIED A4 DO NOT SCALE DRAWING CODE IDENT CHKD DATE APPD 68999 DATE TZ TIMES 2021/08/27 MICROWAVE SYSTEMS An Amphenol Company KS 2021/08/27 CLS50-24M2RF-XX.XXF(M) JM 2021/08/27 S H T 1 OF 1 R E V -