CLS70-18M18RF-02.00F

SYM REVISION DESCRIPTION Preliminary - NOTICE OF PROPRIETARY RIGHTS THIS DOCUMENT CONTAINS CONFIDENTIAL DATA, INCLUDING TRADE SECRETS, PROPRIETARY TO TIMES MICROWAVE SYSTEMS. DISCLOSURE OF THIS DATA IS EXPRESSLY CONDITIONED UPON YOUR ASSENT THAT ITS USE IS LIMITED TO USE WITHN YOUR COMPANY ONLY. ANY OTHER USE IS STRICTLY PROHIBITED WITHOUT THE PRIOR WRITTEN CONSENT OF TIMES MICROWAVE SYSTEMS. 1.85mm Male 3 Label DFTM TZ DATE APPD 2021/07/21 JM APPD 2021/07/21 4 1.85mm Female Ruggedized 185 Clarity Cable With 1 Steel Armor 2 CLS70-18M18RF-XX.XXF(M) SERIAL#XXXX(TMC) Protective barrel, each end 5 See BOM 1. RF Test Requirements: 1.1. VSWR: 1.40 Max @ 70GHz 1.2. Loss: See BOM 2. Connector Specification 2.1. Frequency range : DC ~ 70GHz 2.2. Impedance : 50 Ohm Nom. 2.3. Material and finish 2.3.1. Body & coupling nut : Passivated stainless steel 2.3.2. Insulator : PTFE & ULTEM 2.3.3. Center contact : Gold plated beryllium copper 2.3.4. Solder body : Gold plated brass 2.3.5. Bush : Passivated stainless steel 2.3.6. Protective Barrel : Passivated stainless steel 3. Cable Specification 3.1. Center conductor:Silver plated copper 3.2. Dielectric: Taped PTFE 3.3. Outer conductor: Silver plated copper tape Silver plated copper braids 3.4. Jacket: FEP 3.5. Armor: Steel spring armor with PTFE braids 4. Temperature Range -55°C ~125°C 5. RoHS Compliant Label : CLS70-18M18RF-XX.XXF(M) SERIAL#XXXX(TMC) MATL: N/A DWG SIZE DATE ALL DIMENSIONS ARE IN mm MACHINED SURFACES FINISH 1.6 RMS MAX. REMOVE ALL BURRS 0.15X45˚ MAX. BREAK MACHINE CORNERS 0.15X45˚ D MAX. FILLET R. TOLERANCES ON DECIMALS .X ±0.3 .XX ±0.15 ANGLES ±2° FRACTIONS ± N/A USED ON: O SCALE: DFTM. UNLESS OTHERWISE SPECIFIED A4 DO NOT SCALE DRAWING CODE IDENT CHKD DATE APPD 68999 DATE TZ TIMES 2021/07/21 MICROWAVE SYSTEMS An Amphenol Company KS 2021/07/21 CLS70-18M18RF-XX.XXF(M) JM 2021/07/21 S H T 1 OF 1 R E V -